Signal Splitter

Palmer RMMS 8 Channel Microphone Splitter

The Palmer PRMMS8 Splitter supplies eight channels, each equipped with a direct output and a transformer-isolated output, supporting the set of balanced XLR inputs.

Lehle P-Split III Passive Splitter and DI Box

The Lehle P-Split III can split a high or low impedance signal in two so you can send your sound to both an amplifier and a mixer at the same time. This hum-free unit is happy to take a balanced or an unbalanced input signal.

DAP AS-8 splitter & mixer

<p>The DAP AS-8 is a versatile device that you can use as an 8-in/2-out line mixer or as a 2-in/8-out line splitter with various adjustable outputs.</p>

Palmer ABO Balanced Line Output Switcher

Equipped with one input and two outputs, the Palmer ABO takes a line signal and splits it in two - perfect for sending a single microphone signal to two different locations.

Radial JD7 Active 7-Channel Guitar Splitter

Control up to seven guitar amplifiers at the same time with the help of the Radial JD7 splitter, and flip through amps without messing with your sound or even unplugging your guitar.

DAP PMM-401 4-channel passive mixer

<p>With the PMM-401, DAP have created a compact 4-channel passive mixer. The PMM-401 can be used as a splitter or mixer. You can fine-tune the volume individually per channel. Including 6.3mm jack inputs and outputs.</p>

Radial HotShot DM-1 Signal Splitter and Mute Switch

The Radial HotShot DM1 is a microphone signal splitter and mute switch in one. This passive unit comes equipped with a footswitch so you can swiftly mute the sound or route the signal to a stage monitor or even an intercom system.

Radial HotShot 48V Microphone Switcher

By adding the Radial HotShot 48V microphone switcher to the set up, you can easily flip between two outputs. This box can handle condenser mics and is essential for clear communication with band mates or the sound tech.

ART SPLITCom Pro microphone splitter/combiner

Handy tool with a double application; the splitting of one microphone signal in two outputs and the combining of two microphone signals in one output.

Palmer PRMLS 4-Channel Line Signal Splitter

The Palmer PRMLS is an advanced line-level signal splitter. Based on Palmer's PRM-MS, this unit offers the enhanced performance of decoupling resistors for the lowest possible source impedance.

Palmer ABI Balanced Line Input Switcher

The Palmer ABI enables you to quickly switch between two balanced line signals, supporting dual microphone studio set-ups.

Palmer Grand Audition MKII 24-Channel Speaker Switching System

The Palmer Grand Audition MKII is an advanced speaker routing and switching system designed for audio professionals who need to accurately assess up to sixteen single speakers or eight pairs, plus subwoofers.

Fischer Amps In Ear Amp 8 splitter

Radial SW8 switcher and interface for backup

Radial offers up a brilliant piece of technology with the SW8 switcher, designed to switch easily between redundant systems like, for instance, the playing of backing tracks in live settings.

ART S8-3WAY Microphone Splitter

This 3-way version of the S8 splits eight balanced microphone signals into 24 balanced, low-impedance mic signals.

Radial Catapult TX4M Audio Over Cat5 Extender input module

The Catapult TX4M audio extender makes it possible to extend the audio signal from four XLR microphone inputs to two Cat5 outputs and four isolated mic-level (-40 dB to 0 dB) outputs.

Radial Catapult RX4L Audio Over Cat5 Extender output module

With the Radial Catapult RX4L, it's possible to divide the audio signal from an Ethercon input over 8 XLR outputs. The RX4Lhas 4 line-level XLR-Ms (-20 to +15 dB) and 4 pass-through XLR-Ms.

Radial Relay Xo remote AB switcher

Radial JX44 Active Guitar Signal Manager

Command a small battalion of amps and guitars with the help of the Radial JX44. Able to take four guitars and six amplifiers at once, this neat and flexible unit has been built to manage multiple signals on large stages.

Radial JS2 Passive Two-Way Microphone Splitter

Equipped with an XLR microphone input, an XLR Direct-1 THRU port, an isolated XLR output with ground-lif,t and an XLR Direct-2 THRU port with ground-lift, the Radial JS2 microphone splitter guarantees clean, pro-grade performance.

Palmer River series Vils 2-Channel Combiner/Line Isolator

Hooking consumer audio equipment up to the XLR input of a professional mixer just isn't possible right? Or is it? With the neat Palmer Vils Merge Isolation Box, you can convert a stereo signal into balanced mono, prepping it for pro gear.

Palmer PB 20 S 10-Channel Stereo/20-Channel Mono Press Patch Box

The top-shelf Palmer PB 20 S stereo audio splitter has been based on the same design as the tried-and-tested mono PPB20 but comes 100% calibrated for stereo applications.

(B-Stock) Palmer ABO Balanced Line Output Switcher

Equipped with one input and two outputs, the Palmer ABO takes a line signal and splits it in two - perfect for sending a single microphone signal to two different locations.

(B-Stock) DAP AS-8 splitter & mixer

<p>The DAP AS-8 is a versatile device that you can use as an 8-in/2-out line mixer or as a 2-in/8-out line splitter with various adjustable outputs.</p>