RØDE NT2 A large-diaphragm condenser microphone with broadc

RØDE NT2 A large-diaphragm condenser microphone with broadcast arm
Product no: 9000-0057-5419 Bax Music Warranty: RØDE NT2 A Studio Condenser Microphone This product comes with a 10-year warranty after registration at warranty.rode.com/register Innox IVA08 XLR Pro Broadcast Microphone Stand This product comes with a 3-year warranty.

General

Want to use the Rode NT2 A for podcasting? Then you need a sturdy broadcast arm. That's why we have carefully put together this bundle for you. It consists of a Rode NT2 A condenser microphone and the Innox IVA 08 PRO broadcast arm.

Specifications

1x RØDE NT2 A Studio Condenser Microphone
The Rode NT2 A is a professional large-diaphragm capsule studio microphone with a switchable pickup pattern that can be used for all manner of studio recordings. It has three different settings: omni, cardioid and figure of 8.

Product features

Sustainable product	not specified
Microphone sensitivity (dBV/PA)	-36
Microphone impedance	200-249 ohms
Low-cut filter	yes
Maximum SPL	140 dB - 149 dB
Maximum frequency	20 - 20.9 kHz
Minimum frequency	20 - 21 Hz
Pad switch	yes
Polar pattern	cardioid, figure-8 / bi-directional, omni-directional, multi pattern
Multi-pattern	yes
Tube microphone	no
Stereo	no
Microphone accessories	shock mount, pop filter, cable, bag / box
Vintage microphone family	not applicable
Microphone sound	clean/neutral

Weight and dimensions including packaging

Weight (incl. packaging)	800 gr
Dimensions (incl. packaging)	27,0 x 21,0 x 18,0 cm

Product specifications

acoustic principle: pressure, pressure gradient
pickup pattern: three positions - omni, cardioid or figure 8
frequency range: 20 Hz to 20 kHz
output impedance 200 ohms
signal/noise ratio: 87 dB SPL
maximum SPL: 147 dB (at 1 kHz, 1% THD in 1 kOhm load)
sensitivity: -36 dB re 1 volt/pascal (6.3 mV at 94 dB SPL) +/- 2 dB at 1 kHz
delivered with storage sleeve, screw thread adapter, microphone clip, construction ring
weight: 860 grams
dimensions: 209 x 55 x 55 mm

1x Innox IVA08 XLR Pro Broadcast Microphone Stand
The Innox IVA08 XLR Pro broadcast microphone stand is a pro-grade accessory designed for broadcasters, vloggers, and podcasters alike. Neatly clamp this space-saving stand to the edge of the desk and set up the optimum mic position.

Product features

Number of stands	1
Sustainable product	not specified
Microphone stand weight	2 - 3 kg
Boom arm	no
Height adjustable	not applicable
Colour	black
Stand material	steel
Maximum height of stand	not applicable
Included stand accessories	integrated cable (XLR)
Mininum stand height	not applicable
Podcast bundle	no
Screw thread size	3/8 inch, 5/8 inch
Set	no
Construction	not applicable
Accessory type	broadcast arm
Type of stand	broadcast stand
Type of stand base	not applicable

Weight and dimensions including packaging

Weight (incl. packaging)	2,3 kg
Dimensions (incl. packaging)	100,5 x 18,0 x 10,0 cm

Product specifications

broadcasting microphone arm
compatible with most condenser microphones
male XLR to female XLR version
fully aluminium housing and high-quality hinges
ideal for fixed microphone positioning
stand dimensions:
- upper arm: 490mm
- lower arm: 460mm
cable length: 5m
included:
- mounting hardware
- desktop base
- desk clamp

Write a review

Jeff C. October 23, 2021

Wrote the following about Innox IVA08 XLR Pro Broadcast Microphone Stand

We bought one of these for our on-air studio (https://2xs.rocks/content/studios.html, there's a pic there)), and it is extremely solid, well-made and - quiet! Just about to buy another - so it must be good! Great service by Bax-Shop, btw, after our delivery got messed-up through no fault of theirs, or ours. Re-delivered within 48 hrs.

Adina N. April 15, 2021

Wrote the following about RØDE NT2 A Studio Condenser Microphone

Excellent microphone for its price, love it. For some reason, it works amazing with my vocals!

Jari L. January 18, 2021

Wrote the following about Innox IVA08 XLR Pro Broadcast Microphone Stand

This was probably bargain of the year! I bought this a couple of months ago, and have been using it in a busy studio with large AKG mics.

No noise, sturdy, stays in one place, smooth movements.

Sorry Rode, this runs circles around your 2x more expensive stand!

David Wellings June 8, 2020

Wrote the following about RØDE NT2 A Studio Condenser Microphone

Beautifully made, solid piece of kit easy to set up and, though pretty heavy, works nicely with my boom microphone stand!

Made my first recording with it this afternoon - sounds great (even with my voice....!)

Only problem I have had, is trying to register for the 10 year guarantee with Røde themselves....

Anna S. March 2, 2020

Wrote the following about RØDE NT2 A Studio Condenser Microphone

good quality sound of Rode NT2 A condenser studio microphone

Reviews from other countries

Translate all reviews into English View original reviews

Mark Clappers March 30, 2026

Wrote the following about Innox IVA08 XLR Pro Broadcast Microphone Stand

Een fijn statief voor een goede prijs .Ik heb hem met de bijgeleverde Mount gemonteerd op mijn bureau en dat zit helemaal top.

Alexandre V. March 23, 2026

Wrote the following about RØDE NT2 A Studio Condenser Microphone

Great for beginners and bedroom producers!

Remco January 31, 2025

Wrote the following about Innox IVA08 XLR Pro Broadcast Microphone Stand

Zeer mooi en statief. Had zelf goedkope maar die trekken zo snel krom bij schroefdraad . Wat nog mooier is dat je deze met bijgeleverde mount ook op je bureau kan . Is zeer robuust en sterk . Makkelijk te verplaatsen naar je mond en ingebouwde stekker is ook zeer mooi . Zou deze zeker aanbevelen

Peter vd Putte January 3, 2025

Wrote the following about Innox IVA08 XLR Pro Broadcast Microphone Stand

zeer stevig statief, professionele uitstraling

Max M. September 2, 2024

Wrote the following about Innox IVA08 XLR Pro Broadcast Microphone Stand

stevige statief, de geintegreerde kabel is ideaal

Show all 51 reviews