Briteq BEAMBAR10-RGBW 10-LED bar projector
If you want a device to create a beautifully-lit room, then you'll want a Briteq BEAMBAR10-RGBW projector. This LED bar is equipped with 10 bright, 15-watt RGBW Osram LED modules. Thanks to their 4.5-degree dispersion angle, they each produce a powerful, tight beam of light without any colour shadows. Using the included frost filter, you can also create hazy wash effects.
BEAMBAR10-RGBW: hook it up
With ten lights at your disposal, it's possible to create incredible colour combinations and control them any way you want. If you want to operate the effect using a DMX controller (3-pin connection), you have 60 channels to work with. You can also opt to run any of the three pre-programmed modes. Should you have more than one BEAMBAR10-RGBW, connect them together for even more possibilities. If you're working in an especially large venue, connect using an RJ45 cable so you can control it via ethernet.
- Weight (incl. packaging) 10.0 kg
- Dimensions (incl. packaging) 95.0 x 23.0 x 27.0 cm
- Number of DMX channels >20
- Light source colour red, green, blue, white
- powerful LED fixture
- equipped with 10 Osram RGBW LED modules
- light source: 10x 15-watt RGBW LED module
- with reflectors for a traditional look
- smooth RGB colour blends without colour shadows
- beam angle: 4.5°
- several operational modes: DMX, fixed, automatic, master/slave
- DMX control via several channels
- automatic mode with colour transitions and fixed colours
- master/slave mode for synchronised light shows
- fitted with a rugged foot rest
- includes frost filter
Last month, the good people at Briteq Light Research put on an incredible light show with a load of new effects. Now, you can put the same show together with the BEAMBAR5-RGBW and BEAMBAR10-RGBW, the BEAM WIZARD5X5 LED and the BT-DAZZLE! All these lighting elements work with LED lamps, which means they're a lot more energy-efficient, but can still produce powerful beams of light.Read more...
2x Briteq BEAMBAR10-RGBW
4x Briteq BEAMBAR10-RGBW