Showtec Light Stands & Trusses
This conical pin can be used to connect truss parts. The pin is suited for Pro-30 truss systems.
Use 35mm spigots on a stand with a diameter of 28 mm, thanks to this Showtec adapter. This silver-coloured adapter is equipped with a locking pin.
This really is the ideal way of hoisting compact lighting systems into the air. The Basic 2800 is a wind-up stand with a maximum height of 2.8 metres and a special hoisting system.
Use two wind-up stands and two of these Showtec Stand Mounts incl. TV-spigot (28 mm) for the placing of a truss light bridge. Fit for tubes with a gauge between 48 and 51 mm - the width is adjustable between 197 and 402 mm.
The multi-grip clamp by Showtec is a practical accessory for use with a Pipe & Drape tube. This silver-coloured clamp folds around the tubes (10 to 51 mm). Via an M10 x 25 spigot, things like pin spots can be fastened.
The Showtec Swivel Coupler Slim Line 300 kg can be fastened to the tubes (48-51 mm) of two crossing truss parts, in order to securely fasten these to one another. Capacity: 300 kg.
With this arm coupler, suspending a moving head or other lamp a bit lower from your truss will be easy. It can easily take a load of up to 40 kg and has a low natural weight. Fit for 50mm truss.
This practical slide-mounting system by Showtec will save you a lot of time assembling and disassembling. No more messing around with nuts and bolts.
With this rugged mounting bracket, suspending a moving head won't be a problem. Thanks to two elongated holes, nearly any moving head can be mounted onto it. This bracket has a capacity of 75 kg.
The Showtec Booster Bar 4 DMX is an advanced DMX distribution bar, designed after the famous DMX dimmer bar. This bar is designed for LED armatures that operate at a fixed voltage.
Where ordinary safety cables usually aren't anything more than a steel cable with two loops and a hook, this safety cable has a special braking system, that neatly slows down any device during a fall. If anything should happen, you and your audience are absolutely safe!
The Cable Gliding system operates via bullet-shaped steel balls that are pressed against a steel cable under pressure. The system is made so that it doesn't slip out of position and can be safely used.
FT30-017 T Cross Horizontal 3W by Showtec from the attractively priced FT series. A three-way T piece with 90-degree angles. Delivered including connectors.
Showtec FT30-003 Corner 90 degrees corner piece with connectors. Highly durable, safe and environmentally friendly. High-quality and TÜV-certified. Also compatible with Prolyte trusses.
This stand mount by Showtec is well suited for a Step Truss with 50mm tube and is adjustable from 200 to 400 mm.
Showtec have released a revolutionary solution for unburdening your devices in case of an accident. The built-in braking system of this safety cable ensures that nothing will come crashing down around you!
This revolutionary Showtec safety cable uses a special braking system: in, the case of an accident, a loop in the cable absorbs the gravitational pull, lessening the force that is exerted on the cable!