Special Lighting Cables
This adapter set from ILDA to UTP enables you to control your lasers via ILDA by means of a standard network cable. A heavy and expensive ILDA cable is no longer required!
Connect your lasers to your preferred laser interface with this 10-metre Ayra ILDA cable. The ILDA10MZW features a 25-pin DB25 male to female connector.
Connect your lasers to your preferred software with this ILDA cable. It has a length of 5 metres and features a 25-pin DB25 male to female connector.
Setting up a connection between your laser equipment and an interface requires an ILDA cable. This model is 20 metres long and features a 25-pin DB25 male to female connector.
This slim cable can be used for LED installations like LED strips and LED spotlights. The 4-pole cable has a robust cable jacket of PVC.
The Showtec LED Control RGB cable can be used to connect your LED spotlights or LED strips. A flexible cable jacket ensures optimal protection. This cable is delivered per metre.
This patch cable ensures a worry-free connection between the LD power adapters and several LD LED fixtures. Create your own LED grid!
Cables from the Cameleon series by Showtec can be used out of doors, but to close off the last connector in a watertight way, you need this End Cap. The power cable is hermetically sealed-off this way.
Increase the distance between your LED Pixel controller and an LED Pixel Tube 360 with this 5-metre extension cable.
This LED Control RGB 2.5mm² cable is available per metre. You can use it for your LED spotlight or LED strip installation.
This practical set of end caps is fit for the connectors of light effects from the Showtec Cameleon series. This Data End Cap Set consists of a male and female unit. Prevent short-circuiting and corrosion with these end caps.
Double the range of your Showtec Cameleon DMX cable by means of this 3-metre extension cable.
In order to be able to use the lighting armatures from the Showtec Cameleon series out of doors, you can use this cable. An IP65 classification indicates that the cable can handle any kind of weather.
This rugged extension cable has an IP65 classification. The cable can be used with the Cameleon series by Showtec. Thanks to the locking connectors, water doesn't stand a chance of getting in at the cable.
Extend the length of your Showtec Cameleon power cable with this 3-metre long extension cable.
This original, 3-metre Showtec Cameleon DMX cable is suited for the lighting series of the same name.
This original, 3-metre Showtec Cameleon power cable is suited for the lighting series of the same name.
This splitter from Schuko to PowerCon lets you power three lighting armatures simultaneously.
This flexible cable leads from a DMX female to a 3.5mm jack plug connector and is one metre in length.
This extension cable allows you to increase the distance between your LED Pixel controller and a Tube 360 with up to 10 metres.