Microphone Clamps & Extensions

The Devine SDH-04 turns your microphone stand into a double-mic device. Simply mount the holder on your mic stand and you're able to add a second mic without using a second stand. A gooseneck allows for flexible positioning.

The Devine SDH-02 microphone holder with microphone clip enables you to effortlessly mount a second microphone on a microphone stand. It's particularly practical when you're using separate microphones to amplify your vocals and your instrument.

This microphone clamp provides you with a practical way to attach your mic to your guitar amplifier. The microphone stand can easily be clamped onto your amp and positioned optimally.

The Devine SDH-01 microphone holder enables you to mount a second microphone onto a microphone stand. Thanks to the gooseneck, your mic can be flexibly positioned.

You can record the sound of your drum kit perfectly with this set of three microphone clips. The DMC100s are easy to place. The height and the angle of the microphone can be adjusted.

This universally useable adapter allows you to optimally position microphones and hand-held recording devices for great recordings.

This microphone holder makes amplifying and recording your drums (and your bass drum in particular) much easier. It clings to the rims and has a black coating so it won't stand out on a dark stage.

This black microphone holder is easily attached to stands with a maximum diameter of 23 mm. Subsequently, a goose neck, a mic arm or a mic clip can be attached.

This T-bar allows you to mount two microphones on one mic stand and is therefore a great way to save some positioning space in your setup.

The Devine SDH-03 is a rugged microphone holder that can be attached to your microphone stand, enabling you to mount two mics on a single stand.

This microphone T-Bar provides space for a total of four microphones.

If you want to position multiple microphones on one stand, this is the ultimate solution. Whether you want to record an entire choir or provide back up during conferences, this K & M microphone bar really comes in handy.

This joint allows for optimal manoeuvrability. It is perfect for the end of microphone stands, allowing you to optimally position your microphones so you can make the perfect recording.

Never again will you have to screw or unscrew microphones when you often swap them. This practical product uniforms the coupling and can be attached or detached with a single hand. Perfect for stage and studio.

The Rode Stereo Bar lets you create wonderful stereo recordings in an XY or ORTF setup. Thanks to the groove in the middle, you can adjust the distance between the microphones, with a maximum distance of 20 cm.

The Sennheiser MZH 908 D clamp is specifically designed to fasten the Sennheiser E 908 microphone or the Sennheiser E 608 microphone to a drum.

The Sennheiser MZT 30 L is a flush mount for your Sennheiser gooseneck with 5-pin XLR connector: MZH 3015 L, MZH 3040 L and MZH 3042 L. By drilling a hole of 24 mm in your table, lectern or other surface, you can perfectly flush-mount the MZT 30 L in the surface.