The Shure RK187T1-B clip has been designed to fit all Shure WL18XM Series lavalier microphones, comes in black and ties down a single clip-on mic.
The Shure RK187T2-B Clip has been designed to fit all Shure WL18XM Series clip-on lavalier microphone, comes in black and has space for two microphones.
The Shure RK187T2-W Clip has been designed to fit all Shure WL18XM Series clip-on lavalier microphone, comes in white and has space for two microphones.
Did you break the grille of your Shure SM58 microphone? No need to panic, you can simply replace it with the RK143G microphone grille!
Are you tired of noise ruining your recordings or broadcasts? The RK345 takes care of wind and breath noise, leaving you with a clear recording.
The Shure UA802-RSMA is a 60cm-long SMA coax cable with reversed polarity that can be used to set up the antennas of a GLX-D wireless system a little farther away.
The rechargeable Shure SB900B lithium-ion battery is compatible with an array of Shure gear, including the Axient Digital, ULX-D, QLX-D, UR5, P3RA, P9R, and P10R systems.
The Shure UA860SWB is a 1/2 wave antenna that improves the reception of the Shure SLX, ULX, LIC, UHF and UHF-R, allowing for a better reception.
Just in case they get worn out or go missing, the Shure RK379 microphone clip and windshield pack is compatible with the Shure SM31FH Fitness microphone headset.
The Shure AP98WS Windscreen has been made specially to fit the Shure PGA98H and PGA98D instrument condenser microphones, keeping the sound clean of wind noise.
Designed to fit the Shure MVL clip-on microphone, the Rycote AMVL-FUR Mini Windjammer supports outdoor recordings, so you can keep the sound clean and clear of wind noise.
The Shure RK187T1-W clip has been designed to fit all Shure WL18XM Series lavalier microphones, comes in white and ties down a single clip-on mic.
Shure microphones need to be properly protected against unwanted noise, and the Shure A85WS windshield does just that. It's suited for Shure Beta 87A/C, SM87A, SM86, SM85 and BG5.1 microphones.
The Shure MoveMic AMV-LAV-WS/W-KIT includes a set of windshields and matching clip covers for Shure's MoveMic wireless lavalier microphone system.
<p>This professional Shure A89MW-KIT is the right choice for anyone who regularly works with the VP89M shotgun microphone. The Shure A89MW-KIT contains a deadcat, blimp and suspension, for maximum wind dampening.</p>
The Shure Nexadyne RPM283 is a compatible replacement grille for the Nexadyne RPW206 microphone capsule.
The Shure Nexadyne RPM282 is a compatible replacement grille for the Nexadyne RPW202 microphone capsule.
The Shure Nexadyne RPM281 is a compatible replacement grille for the Nexadyne NXN8/S microphone capsule.
The Shure Nexadyne RPM280 is a compatible replacement grille for the Nexadyne NXN8/C microphone capsule.
The Shure SB903 rechargeable lithium-ion battery is fully compatible with all Shure SLX-D Series transmitters.
The Shure A58WS microphone windscreen eliminates wind and breath noise without affecting overall sound quality. It's suited for ball-type mics, such as the Shure SM58, Beta 58A, etcetera.
This gold-coloured housing will give your Shure BLX2-SM58 or BLX2-Beta58A wireless handheld microphone a complete make-over. Great for colour-coding mics!
Ideal for content creators who're always on the move, this charging case for Shure's MoveMic system keeps your wireless microphone safely tucked up and charged at the same time.
Do you want to hook up your dynamic microphone to a bodypack transmitter? With this kit, you can equip your microphone cable with a connector that allows you to do just that, basically converting your mic into a wireless one!
Shure MoveMic AMV-LAV-FUR Furry Windshield for MoveMic Clip-on Microphone
Breath and wind noise, mechanical noise, handling noise; these are all issues that are common for microphone users. Luckily there is an answer to all of these problems: the Shure A15HP in-line high-pass filter!
<p>The Shure PRM89S is the microphone capsule that matches the VP89S shotgun microphone. With this spare part, you will always have a good backup for professional sound jobs.</p>
<p>The Shure RPM89L is a perfect replacement microphone capsule. Specifically designed for the VP89L shotgun microphone</p>
If your wireless handheld microphone's cartridge is broken, you don't have to replace the whole thing. Why not just get a new microphone head, like this Shure RPW118 Beta 58A microphone head?
The Shure UA221 is a passive antenna splitter/combiner kit. Use it to split an incoming signal into two outgoing signals, or to combine two incoming signals into a single signal.
The Shure PS43E is here to replace the PS31E, PS40E and PS41E mains power adapters, and is compatible with receivers from the LX, UC, SC, ULX, SLX and PSM Series.
Shure's bodypack transmitters allow you to transmit your guitar or keyboard's signal to a receiver, provided you have an additional cable. Fortunately, Shure offers just the thing you need with the WA304 instrument cable!
In order to get the best possible results, it's important to mount your drum microphone at the exact right position. With the A56D drum microphone mount, Shure makes it easy for you!
The Shure A85F line matching transformer allows you to connect a balanced low-impedance microphone to an unbalanced high-impedance input.
The Shure A2WS microphone windshield keeps unwanted noise caused by breath or wind at bay. It also features a locking system that will keep it firmly in place!
Compatible with Shure TwinPlex TL40 lavalier microphones, the Shure RPM40STC tie clip provides a neat and efficient solution when it comes to discretely miking up the presenter and guests. This pack includes three clips.
Having a transmitter on your belt can be a bit uncomfortable, especially when you tend to move around a lot on stage. The Shure WA570A solves that problem, as it is a pouch that you can strap around your waist.
The Shure RK265G is the easiest way of replacing your Beta58A's damaged grill, keeping your mic safe, and keeping its great sound intact!
Even a small unwanted bit of noise can ruin a recording, and shocks and vibrations are often the main culprit. Luckily, the Shure A55M shock mount prevents those vibrations from reaching the mic and polluting the signal!
Have you ever made a perfect recording that was ruined by annoying plosives and other breath noise? You could have prevented that with the Shure PS-6 popper stopper pop filter!
<p>For a recording full of ambiance, you can screw this capsule onto a Shure Beta181 preamp. This leaves you with a condenser microphone that picks up ambiance really well. It is also fit for string ensembles and as a drum overhead.</p>
Besides this blue model, Shure also has pink, red, white, silver and gold-coloured housings. Great for variation and identifying which mic belongs to you.
The Shure UA221DB-RSMA passive antenna splitter splits an incoming signal into two output signals, allowing two GLXD4R+ receivers to share a single pair of antennas.
The Shure A81WS windscreen prevents your end address microphone from picking up anything it shouldn't, protecting your recordings and preventing them from being polluted by wind noise.
<p>With the Shure A89U you will be able to reduce the length of VP89 shotgun microphones. Thanks to the U-bend, the microphone is virtually cut in two. If space is an issue, this solid adapter can help you out.</p>
Shure's WH10 and WH20 lavalier microphones are often used outside, where the RK318WS windshield will keep wind and breath noise from affecting your sound!
The Shure RPM560 is a replacement headband for the WBH53T/WBH54T headset microphones. This is the Tan version.
Filters Filters