☀️🌴SUMMER SALE! Up to 70% off selected products ⏩Shop now!
The Beyma 4FR40 full-range speaker excels when it comes to both compact design and extensive response. This 4 inch speaker has an AES power rating of 40 Watts.
The Beyma FD 350 passive crossover is compatible with three-way systems.
Specially designed to filter out the lower frequencies and prep the signal for tweeters, this is a two-pack of professional Beyma F100 passive high-pass filters.
The Beyma 18LEX1600Fe 18-inch ferrite bass woofer can easily handle a 3,200W load. Ideal for subs, this professional 8-Ohm driver features the unique Malt Cross cooling system.
The Beyma 12 BR 70 low-frequency speaker boasts a high sensitivity and extremely low distortion. Equipped with a curved cone, this professional 12-inch transducer has a 125W RMS power rating.
Beef up the sound with the Beyma 10BR60 V2! This 10" low/mid speaker has been specifically designed to project rich bass and mids with barely any distortion and is fully focussed on the 30Hz to 5,000Hz frequency range.
This 8-inch bass and mid/bass speaker was specifically designed to reproduce exceptional low and mid frequencies with high sensitivity and extremely low distortion.
An impressively powerful 21 inch bass woofer, the Beyma 21QLEX1600FE pumps out a 1,600 Watt RMS power rating at 8 Ohms and a program load capacity of 3,200 Watts.
The Beyma 15CXA400Nd not only guarantees optimally-projected sound but takes care of unwanted phase issues. This 15-inch full-range woofer also boasts a 400W AES LF output.
This 12" speaker has a frequency range that sits in that sweet spot between 35 and 2000Hz. Designed with MMS technology to ensure precise control, linear response and super-low harmonic distortion.
This 6.5-inch unit was designed to offer a smooth, wide response in the mid and bass frequencies with minimal harmonic distortion.
The Beyma 8WRS300 wide range low-mid bass speaker pushes a 300 Watt AES power output at 8 Ohms, has a 65Hz to 4000Hz frequency range and a 97 decibel sensitivity level so it can be installed to support an array of systems.
The Beyma 12WRS400 wide range low-mid bass speaker pushes a 400 Watt AES power output at 8 Ohms, has a 45Hz to 5000Hz frequency range and a 97 decibel sensitivity level so it can be installed to support an array of systems.
The core of this 15" bass speaker is formed by high temperature neodynium magnets and a 4" DUO inner/outer voice coil. The professional performance of the Beyma 15 LX 60 V2 boasts a 700 Watt AES power capacity.
The Beyma FD 250 passive crossover has been specially designed for two-way systems. Here, you get two.
The Beyma 15LEX1000Fe woofer is a 15 inch monster packing up to 2,000 Watts of power, an RMS load of 1,000 Watts and a nominal impedance of 8 Ohms.
The Beyma 18LEX1000ND is a high-end 18-inch bass woofer suitable for direct radiation bass cabinets and band-pass subwoofer applications. This speaker combines 2,000 Watts of peak power with extremely low distortion for powerful and bright bass.
The 12 inch Beyma 12MCB700 low/mid bass woofer can be installed in a self-build cabinet, setting it up with 1,400 Watts of power at 8 Ohms.
The Beyma 15MC500 is a dependable 15" low/mid woofer that comes loaded with a 2.5" voice coil, a ferrite magnet and a Malt-Cross Cooling System to assure you of pro-level performance, an AES power output of 500 Watts and a 98dB sensitivity.
The Beyma 10G40 is a pro-grade, 400W-strong speaker with a frequency range of 45 to 4,000 Hz.
The Beyma FD2XA professional two-way passive crossover is specifically designed to pull the best possible performance out of the drivers of Beyma XA and XC coaxial speakers.
The Beyma 15LEX1600Nd has been specially designed to reproduce stable, detailed bass. This 15" bass woofer can handle up to 1,600 Watts and has an impedance of 8 Ohms.
The Beyma 15MCS500 low-mid woofer has been specially designed for 2-way and 3-way PA systems and line-arrays. This 15-inch speaker has an AES power capacity of 500 Watts and covers the 50 to 4,000 Hertz frequency range.
The 10-inch Beyma 10MC500 speaker gives you 500 Watts (AES) of low-mid bass alongside an astounding level of performance, a 97dB sensitivity, a fitted 2.5" voice-coil, ferrite magnet, and an efficient Malt Cross cooling system.
Besides an incredibly high SPL of 104dB, the professional, lightweight Beyma CP 09 compression tweeter effortlessly spans a 2,000 to 20,000 Hertz frequency range.
The Beyma 5P200Nd low-mid bass speaker has been kitted out with a neodymium magnet and boasts an AES output rating of 150 Watts at 8 Ohms.
Backed up by a 1,000W AES power rating, the Beyma 15P1000Fe/V2 low-frequency transducer delivers impacting lows covering the 45 to 2,000 Hertz range.
The Beyma FD passive two-way crossover has an optimised circuit design to ensure as perfect a balance as possible and features a crossover frequency of 1.2kHz.
The 5MP60/N is an excellent speaker for small bass reflex cabinets.
The Beyma CP22 compression tweeter has been developed to finish a multi-component speaker system as part of audio installations in need of high-output coupled with a narrow and controlled dispersion.
The Beyma CP16 compression tweeter has been developed to polish off multi-component speaker systems with controlled dispersion and a flexible response.
The Beyma 10WRS300 wide range low-mid bass speaker pushes a 300W AES power output at 8 Ohms, has a 55Hz to 5000Hz frequency range and a 95 decibel sensitivity level so it can be installed to support an array of systems.
The Beyma F-130 is a high-end high-pass crossover. Here, it comes as a pair.
This 1-inch high-frequency compression driver features an ultra-lightweight voice coil. The CD 10 Fe has a power capacity of 70 watts AES and a frequency range of 0.7 to 19 kilohertz.
Featuring a 1 3/8 inch screw-in design and fitted with a ferrite magnet and lightweight voice-coil, the Beyma CD1S compression driver delivers professional treble performance.
This tweeter has an excellent response with a horizontal projection of 140 degrees. It was specifically designed for wide projection and an accurate frequency range.
The Beyma 8WR300 wide range low-mid bass speaker pushes a 300 Watt AES power output at 8 Ohms, has a 65Hz to 4000Hz frequency range and a 95 decibel sensitivity level so it can be installed to support an array of systems.
A solid pick for a custom two-way or three-way PA speaker or line-array, the Beyma 10MCS500 10-inch low/mid bass speaker has a 500W AES power capacity and offers a 70 to 5,000 Hertz frequency response.
The Beyma T 2030 metal-done tweeter is specifically designed to reproduce trebles as part of a two-way or three-way studio or home speaker system.
The Beyma FD2CX passive two-way crossover has an optimised circuit design to ensure as perfect a balance as possible and features a crossover frequency of 2.6kHz.
The Beyma replacement 8-ohm diaphragm is designed for the CP750 TI & CP755 TI-ND compression drivers. It's 4.75 inches in diameter.