230V Power Cable
This power cord is suitable for various Boss and Roland devices. It's an ideal spare part and can replace your original cord when it breaks.
The Procab CAB480 is an IEC-320-C13 female / IEC-320-C13 male-extension cable of 0.5 meters. Bridge that gap between your power cable and the device you want to power up.
This Procab CAB480 offers an extra meter of elbowroom for when you are connecting your IEC-320-C13 plug-connected device. This one always comes in handy when the original plug isn’t long enough.
This IEC-320-C13 female – schuko male cable supplies countless devices with 230 Volt. Its length of 50 cm works well in situations where excess cabling is only a hindrance.
If you want to plug your IEC-320-C13-connected device but the cable cannot reach far enough, this CAB480 extension cable is the solution. You’ll obtain three extra metres of length, which provides flexible placement.
This highly convenient schuko IEC-320-C13 cable is no less than 5 metres long: ample length to get from the power socket to any desired device. The CAB490 offers great possibilities for your equipment setup!
This useful cable can be used to create an additional power-point when only few electrical outlets are available on location. The cable cores have a cross-section of 1.5 mm² and the cable is 1.5 metres long.
Sometimes you are just lacking that bit of cabling. In that case, this cable is highly practical. It can also be used for daisy chaining of various light effects.
Accu Cable IEC-320-C13 mains cable with a length of two metres.
A great number of devices are powered by means of an IEC-320-C13 connector. This CAB490 can power those devices with its 70-cm cable that runs from IEC-320-C13 female to schuko male. The flexible CAB490 comes at a fair price and can be used for many purposes.