☀️🌴SUMMER SALE! Up to 70% off selected products⏩Shop now!
Besides placing your speakers on stands, you can also suspend or stack them. This category consists of the necessary speaker rigging materials, including commonly used rigging points / eye bolts. The latter are often used in combination with M-10 screw threads, which you'll find on most speakers. This category also contains separate parts that can be fastened to boxes or line arrays, such as rack strips, brackets (for clustering speakers), fly bars and complete rigging sets. Don't forget to check out the category ball corners and flat corners, too!
<p>Single point flying stud for the R1436/R1438 strip. Made of cast aluminium with an outer diameter of 37 millimetres.</p>
The RCF Fly Bar Pickup is designed to suspend the HDL 6-A speaker in the HDL6 Fly Bar using a (soft) steel cable.
Want to suspend your DAS Audio Vantec speakers? Use this set of eyelet bolts and carabiners and you'll be assured of a secure set-up.
This is the Duratruss DT Eye Nut M10. This small yet strong piece of hardware is able to support a maximum load of 230kg.
The White RCF Fly Bar HDL6 is suitable for use with the HDL 6-A line-array system and HDL 12-AS subwoofer.
This double fly eyelet is made of metal and fits the R1438. It has an outer diameter of 54 millimetres.
This is the Duratruss DT Eye Screw M10. This small yet strong piece of hardware is able to support a maximum load of 230kg.
Create a true pillar of sound when you use this flying link kit to mount your NXL 24-A speaker to a flying NXL 24-A.
<p>Suspending speakers can really improve your sound in certain situations. You will need a flying stud to do so, however. This flying stud by DAP has an M10 screw thread and has a capacity of 50 kg.</p>
RCF's FLY BAR NX L44-A is a mounting system for the NX L44-A line array speaker. It's made of steel and comes with all the accessories you need.
The DAS Audio AXS-VT20 stacking frames have been specifically designed for stacking and securing three Vantec-20A line array speakers.
The RCF Fly Bar HDL6 is suitable for use with the HDL 6-A line-array system and HDL 12-AS subwoofer.
The Fly Bar HDL20 Light by RCF is a suspension system for up to four HDL 20-A line array modules. It comes complete with everything you need to hang up your gear.
Looking for the perfect way to link two NX L44-A array systems together? The RCF Link Kit makes it possible to fly two array speakers directly underneath each other, or at a 15-degree angle.
The AC ART708 H-BR brackets by RCF are suitable for mounting the ART 708-A or ART 408-A on a wall. They're scratch-resistant and made of rugged steel, and can be used to position the speakers at an angle.
<p>These eye bolts are a perfect match for the JBL SRX700 F series. Easy to use and very strong.</p>
The DRK-10 is a rigging kit for hanging up your DVA T4 modules by dB Technologies. It has a metal frame and a black finish.
Use this flybar to suspend your RCF HDL 10-A and create a lovely line array with a maximum of 16 speakers.
Use the NXL 24-A fly bar for flying pillar-shaped speakers.
Durable DAP eye bolt for hanging speakers. The eye bolt has an M8 screw thread.
The DRK-M5 is part of the accessories range designed for the DVA Mini modules by DB Technologies.
Designed to support the Vantec-20A and/or Vantec-118A line array speakers, the DAS Audio AX-VT20 Flybar can take up to five 5x Vantec-20As, or two Vantec-118A subs and four Vantec 20As.
