This twelve-pack of Boston TS-01-C short, self-tapping screws are designed for replacing those sweaty, rusted pickguard screws and sprucing up your electric guitar. These chrome plated screws are compatible with most ST-style models.
This pack of twelve Boston TS-01-B screws can be used to freshen up the scratchplate of your guitar. Each screw has a half-sunken cross-head for a neat and tight finish.
The Boston SS-18-B is a set of twelve black metric screws you can use to mount an element switch. Good quality and kindly priced.
This 500 millilitre can of Boston NC-510 Nitrocellulose Primer can be used to start off the paint-job of a self-build electric guitar or bass, or help spruce up an old model with a fresh coat.
This 500 millilitre can of Boston NC-510 Nitrocellulose Lacquer can be used to finish off a self-build electric guitar or bass, or spruce up an old model with a fresh coat of Tobacco Brown lacquer.
This 500 millilitre can of Boston NC-520 Nitrocellulose Lacquer can be used to finish off a self-build electric guitar or bass, or spruce up an old model with a fresh coat of Olympic White lacquer.
This 500 millilitre can of Boston NC-530 Nitrocellulose Lacquer can be used to finish off a self-build electric guitar or bass, or spruce up an old model with a fresh coat of Daphne Blue lacquer.
Fully shielded and wrapped in waxed cotton, this 30cm-length of Boston PBW1 braided push-back wire has been designed by Gavitt, made in the USA and built for re-wiring electric or semi-acoustic guitars and basses.
Fully shielded and wrapped in waxed cotton, this 30cm-length of Boston PBWS1 braided push-back wire has been designed by Gavitt, made in the USA and built for re-wiring electric or semi-acoustic guitars and basses.
This 5cm wide and 150cm long roll of Boston CST-200X5 copper tape is ideal for shielding electronic gear - especially the routing and pickguard of electric guitars and basses.
This 500 millilitre can of Boston NC-510 Nitrocellulose Lacquer can be used to finish off a self-build electric guitar or bass, or spruce up an old model with a fresh coat of clear tinted lacquer.
Set of 4 Boston LFT-B luminous footswitch toppers in blue. Increases the switching surface area and remains more visible on dark stages; fits most footswitches.
Set of 4 Boston LFT-G luminous footswitch toppers in green. Enlarges the switching surface for more comfortable operation and better visibility on dark stages.
Set of 4 Boston LFT-P luminous footswitch toppers in pink. Increases the switching surface area, is more comfortable to use and remains clearly visible on dark stages.
The Boston TI-340-IN is an ivory-coloured switch cap for your singlecut guitar. It's ideal as a replacement for your current cap, or if you're giving your axe a whole new look.
This pack of twelve self-tapping mounting screws come with a nickel finish and provide the perfect finish for ST-style pickguards.
This 5cm wide and 150cm long roll of Boston CST-100X5 copper tape is ideal for shielding electronic gear - especially the routing and pickguard of electric guitars and basses.
Boston's KCH-205 is a chrome dome-style guitar knob to replace your current (or missing) guitar knobs with. Cool, functional and affordable.
The Boston BN-5 universal nut has been made from bone and, once filed down for a custom fit, upgrades the tuning stability as well as the resonance of your guitar. This nut measures 53 x 10 x 5mm.
If you've shamefully misplaced your tremolo arm, or you're just looking for something different, Boston offer up the white-tipped TA-5-FCW chrome replacement tremolo arm.
If you've shamefully misplaced your tremolo arm, or you're just looking for something different, Boston offer up the black-tipped TA-5-FCW chrome replacement tremolo arm.
The Boston EP-R-8 set includes a pair of solid and durable guitar strap buttons and installation screws.
Install the Boston SH-8-C string guide to ease tension on the nut and help optimise tuning. This cylinder-style guide includes a mounting screw and comes in chrome for a more classic finish.
Prevent your guitar from falling and suffering damage due to a faulty strap with these durable and dependable Boston BSL-20-CH chrome strap locks.
Keep your strap firmly secured to your guitar or bass and do it in deluxe style courtesy of this set of Boston BSL-20-GD strap locks - finished in gold.
This set of Boston BSL-20-BK strap locks are built to make sure your strap never comes loose again, no matter how much you throw your guitar around.
Is the switch knob on your T-style guitar missing? Then Boston offers a good replacement part with this LB-360.
This affordable set of machine heads by Boston will ensure your classical guitar stays in tune. It contains three tuners per side with white plastic pegheads.
The Boston EP-R-G strap button pack includes two gold-plated strap buttons and a pair of mounting screws - all you need to refresh the look of your trusty axe.
This highly dependable set of 059-CL machine heads from Boston ensure that your perfectly tuned guitar stays that way. These chrome-plated heads have a traditional design to match most instruments.
This 500 millilitre can of Boston NC-510 Nitrocellulose Lacquer can be used to finish off a self-build electric guitar or bass, or spruce up an old model with a fresh coat of high-gloss.
Sometimes, when you amp up your acoustic guitar, you'll get some annoying high-pitched feedback. To counter this, Boston present the AGM100 feedback buster.
Keep your strap firmly secured to your guitar or bass and do it in deluxe style courtesy of this set of Boston BSL-20-BC strap locks - finished in black chrome.
The Boston KB-160 potentiometer knob has the same bell-style design as the knobs found on a lot of single cutaway guitars. This version comes finished in transparent black.
Boston offers a good option with this KB-134-T if you want to replace the knobs on your double cut-style guitar. This is the knob for the tone potentiometer. Suitable for inch-type potentiometers.
If the cap is long lost or beyond repair, simply replace it with the Boston LB-360-IN switch cap to restore the classic look or customise the vibe of your T-style electric guitar.
Replace a long-lost switch or just update the look of any LP-style single-cut electric guitar with the black Boston TB-340-IN switch cap.
The Boston TI-350 is a small-model switch cap with a metric design. It's compatible with European as well as Asian-made pickup switches and instantly refreshes the look of your guitar.
The Boston TB-350 electric guitar toggle switch tip has a black finish and an M3 screw thread which makes it compatible with metric pickup switches.
Upgrade an old ST-style guitar or polish off a DIY model while keeping things high-quality yet budget-friendly courtesy of the Boston JP-2 recessed jack plate. This edition comes in solid black.
The Boston PB-315-VW vintage white pickguard is made to match P-style basses and features all of the standard cut-outs to ease installation.
Protect the soundboard of your acoustic guitar while fully retaining the natural look with the transparent Boston AG-100-TR scratchplate.
The Boston M4V-110 is a single-ply pickguard designed for 4-string Sire Marcus Miller V-Series bass guitars.
The Boston M4V-210 is a single-ply pickguard designed for 4-string Sire Marcus Miller V-Series bass guitars.
The Boston M4V-310 is a triple-ply pickguard designed for 4-string Sire Marcus Miller V-Series bass guitars.
