Based on more than 21,240 customer reviews

HK Audio Icon speaker set

Discontinued, this product can no longer be ordered.

No alternatives found
HK Audio Icon speaker set
Product no: WI-201260 Bax Music Warranty: This product comes with a 5-year warranty when you register it with hkaudio.com within 30 days of purchase. If the product is not registered it has a 3-year warranty.

General

The Icon IC 118 BA subs use a bandpass design to create the highest possible sound pressure levels while still producing deep bass tones that go far below 40 Hz. Even when you ask the most from the subwoofer, its impulse response accuracy is still astonishing. When you use it as part of your setup, the IC 118 BA can be fully driven by the IC 112 LA mid/treble cabinet. The subwoofer cabinet is equipped with the electronics of one of the latest 2,000W, 4-ohm class-D amplifiers and an 18-inch 4-ohm neodymium woofer with lots of headroom. Thanks to a maximum SPL of 136 dB (139 dB peak) the subs offer a powerful, dynamic bass with a frequency range of 33 Hz to cutoff, even at high volumes.

Thanks to the included dolly and six multifunctional handles, this 54 kg sub is easy to transport. An RJ45 connector with internal system protecting sends performance data to the top cabinet that can then be adjusted with the PodWare software on a Windows PC.

The IC 112 LA is an active, processor-driven two-way mid/high cabinet that is fully horn loaded. Thanks to its 24-bit/96kHz DSP and two amplifiers, this top cabinet is the brains of the system. Its 12-inch/8-ohms neodymium speaker is powered by a 1,000W class-D amplifier at four ohms, and the 1.4-inch/8-ohm HF driver is powered by a 600-watt class-D amplifier, also at 4 ohms. The DSP unit controls the entire system, including the Gain, EQ and both limiters (RMS / Peak). Thanks to the 60x40-degree horns of the tweeter and 12-inch speaker, the IC 112 LA has an accurate spread for its entire frequency range (400 Hz to 17 kHz).

The audio reproduction of mids and trebles assures a defined sound, all the way up to 131 dB in half-space. The optional tilt unit allows you to place the top speaker at 5 different angles, up to 15 degrees. The result is a mid/treble speaker that can be accurately directed at the audience, even from a ground-stack setup. The top cabinet features two multifunctional handles and a detachable dolly. Moreover, you can also fly this speaker thanks to the built-in Aeroquip tracks.

Tips or comments about this product
  • Please note: comes without cables.

Specifications

Weight and dimensions including packaging

Weight (incl. packaging) 206,0 kg
Dimensions (incl. packaging) Not yet known

Product specifications

2x HK Audio LC 118 BA active subwoofer

maximum sound pressure of 136 dB @ 10% THD
maximum sound pressure of 138 dB @ 10% THD, 90 Hz - 100 Hz
maximum peak: 138 dB
18-inch neodymium woofer in a bandpass housing
max. input level of +22 dBu
frequency response +/- 3 dB: 41 Hz - crossover
frequency response -10 dB: 33 Hz - crossover
input impedance of 20 kOhms
sensitivity: 1/105 dB
input sensitivity (volt RMS): +4 dB
1x 2,000W subwoofer amplifier / class-D @ 4 ohms
subsonic filter, system controller with peak limiter
XLR in, XLR through, 2x Ethernet RJ45 internal system protection
2x M20 threaded base plates
dolly with 4x 100mm casters
8 countersunk handles
birch plywood housing, 15/18mm 9/13 ply
metal grille with black acoustic foam
black polyurethane lacquer
dimensions: 500 x 900 x 810 mm
weight: 54.1 kg (without battery)

2x HK Audio LC 112 LA active speaker

maximum sound pressure level: 131 dB @ 10 THD, 120 Hz - 12 kHz
maximum sound pressure level: 134 dB @ 10 THD, 120 Hz - 5 kHz
maximum pressure peak of 136 dB @ 10% THD
maximum theoretical sound pressure of 139 dB, based on peak capacity
active cutoff frequency of 900 Hz, 24 dB octave
12-inch custom neodymium speaker with 1.4 HF compression driver for a 60x40-degree CD horn
max. input level of +22 dBu
frequency response +/- 3 dB: 134 Hz tot 17 kHz (LTS system-filter)
frequency response -10 dB: 108 Hz tot 17 kHz
input impedance of 20 kOhms
sensitivity 1W: 109 dB (120 Hz - 16 kHz, half-space)
input sensitivity (volt RMS): +16 dBu, +4 dBu, 0 dBu, -10 dBu, selectable
1x low/midrange amplifier of 1,000W / class D @ 4 ohms
1x HF amplifier of 600W / class-D @ 4 ohms
RMS limiter, peak limiter and subsonic filter
XLR line in, XLR line through, XLR sub out, 2x BVNet RJ 45 in/out and Ethernet RJ 45 internal system protection
Aeroquip rigging points
dolly with 4x 100mm casters
four countersunk handles
birch plywood housing, 18mm, 13-ply
metal grille with black acoustic foam
black polyurethane lacquer
dimensions: 500 x 600 x 810 mm
weight: 49.9 kg (without battery)

A review can no longer be written about this item

Reviews from other countries

Translate all reviews into English

HK Audio Icon speaker set
Wrote the following about HK Audio Icon speaker set
Dit is echt een zeer goede set.
Ik gebruik hem voorlopig nog gewoon in mijn kamer
maar binnenkort pak ik hem mee naar een gig.

het is echt een aanrader.
groetjes Teun vdv
HK Audio Icon speaker set
Wrote the following about HK Audio Icon speaker set
goeie kwaliteit met een sterk geluid

Alternative products by other brands

Search all products in category Products out of Stock
Compare your gear (1/10)