In the category Mounting Material for Cables, you'll find a variety of nuts, bolts, and screws for mounting all kinds of components. See also Cable Tools & Connecting Tools.
Want to create custom speaker terminals or power sockets? The Devine D-Chassis 4 front panel can be installed in a rack chassis and offers four cut outs for D-size sockets.
This Neutrik MFD mounting plate allows you to easily mount plug chassis with M3 screws.
Complete a custom connection point using the Innox D-Chassis C panel. Made from steel, this mounting panel is 4.5cm deep and provides four gates for securing cables.
This metric fastener set from Penn Elcom includes all screws, washers and locknuts required to assemble the anti-vibration rack system R8800.
Complete a custom connection point using the Devine D-Chassis B panel. Made from steel, this mounting panel is 3.3cm deep and provides four gates for securing cables.
T.b.v. the NLT4MP
Complete your own custom connection socket using the neat Innox D-Chassis mounting panel. Simply fit any D-sized chassis connectors and install a fixed connection port for gear like a PA system or DJ setup.
The Innox M3x12 is equipped with a countersunk head and is supplied per 200 pieces.
This part is the Showtec 90659 PowerBOX clamp (supplied per set of two). This is a clamp intended for the Showtec PowerBOX.
The Innox M3 steel locking nuts can be used to assemble chassis parts. This pack includes 250 nuts.
With the Audio Metalz LAPP PG16M union nut, you can easily mount a spiral nut to your stage box.
The Innox M3x16 is a black bolt with a countersunk head. This box includes 200 bolts.
The M3x16 features a convex head.
Running a heavy stage box? Fit the Audio Metalz LAPP PG16 spiral cable gland to provide some strain relief and prevent cable breakage.
A spare cable gland nut from Audio MetalZ with a maximum cable entry of 48mm.
Use this connecting angle when assembling Penn Elcom's anti-vibration rack R8800. It is made of black steel and suitable for placing one to two rubber anti-vibration rubbers and angle R8856 on top.
For the box side of your sack system R8800 from Penn Elcom, you'll need connection angles like this one. It is made of steel and finished with a black powder coating.
Use the Neutrik SE8FD assembly kit to mount your EtherCON D-series chassis connector, and you'll have a splash-proof IP54 connection.
