The Adam Hall 4044 corner bracket 40 x 50 is a sturdy and corrosion-resistant mounting bracket made of galvanised steel, ideal for reinforcing corners in structures and furniture.
Penn Elcom oversight corner with 6 pre-drilled holes. This sturdy overlay corner is made of high-quality material and has nicely rounded ends. The dimensions are 51.5 mm x 47 mm.
The Penn Elcom B1131 brace bracket is made of 1.2mm-thick steel, features six pre-drilled mounting holes and measures 51.5 by 42mm. The internal radius is 1.5mm.
The Penn Elcom C1343z ball corner is made of steel, has a 1mm internal radius and is compatible with 22mm extrusions. Install one at every corner of your DIY flight case and be assured of optimum protection.
The Penn Elcom B1135z is a T-overhead angle suitable for use with the EG-0112. It has internal radii of 1 and 5 mm and six pre-drilled 5.2 mm diameter mounting holes.
Lost the keys to your Fazley guitar case? Simply replace them with this spare set. This pair of Fazley 10302 keys is compatible with almost all Fazley hard-cases, unless fitted with TSA locks.
This 50mm by 40mm Penn Elcom T-corner bracket comes in a zinc-coloured finish and has been pre-drilled with six 5mm mounting holes to ease installation.
This Penn Elcom cabinet corner is made of black plastic and can be installed to reinforce the corners of a custom speaker. This model is stackable and comes with four pre-drilled holes to ease mounting.
To complete the L0747 Series latch lock from Penn Elcom and polish off a secure flight case, you'll need to the L0747/CP catch plate.
This Penn Elcom-made brace features four pre-drilled mounting holes and has been made of 1.2mm steel. The corners are rounded and the whole thing measures 31.2mm by 40mm.
This 50mm by 42mm Penn Elcom T-corner bracket comes in a zinc-coloured finish and has been pre-drilled with six 5mm mounting holes to ease installation.
This Penn Elcom steel corner bracket is equipped with four pre-drilled holes and has two rounded ends. It has a dimension of 25 x 37mm and is made of 1.2mm steel with a zinc colour.
Secure a few of these Adam Hall rubber feet to the bottom of a flight case, guitar amp, or other gear to ensure a stable and firm base that keeps the floor scratch free. This is a single rubber foot.
The Penn Elcom B1930z brace is made of 1.2mm-thick steel and measures 35 x 40mm. It has a 2mm internal radius and comes with four pre-drilled mounting holes for eased installation.
The Penn Elcom B0700z brace is made of 1.2mm-thick steel, has a 1mm internal radius and comes with four 5mm pre-drilled mounting holes.
These galvanised M6 x 45 mm flat-head, square-neck (DIN 603) screws are ideal for mounting enclosures, rack rails, doors and roller boards.
Made from heavy-duty metal, the Penn Elcom B0706n corner bracket features rounded corners and pre-drilled mounting holes.
This fixing ring is ideal for use with padlocks or seals. Made of sturdy, galvanised steel and suitable for a variety of applications.
The Adam Hall 40406 is a flat steel L-corner bracket, ideal for reinforcing corners of cases, crates and other structures. The bracket has a galvanised finish for extra durability.
With the Penn Elcom B0702z, you have a nicely finished oversight corner. The oversight corner is made of a very strong metal and the sides are nicely rounded. The pre-drilled holes have a diameter of 5 mm.
This Penn Elcom zinc corner bracket has four pre-drilled mounting holes. Its size is 20 x 37 mm and it is 1.2 mm thick.
This 15 mm chipboard screw from Adam Hall has a black oxide finish and is suitable for a variety of fastening jobs. Featuring a fillister head and Pozidriv drive.
Solid black chipboard screw from Adam Hall with flat head and Pozidriv drive, ideal for sturdy fixings.
The Adam Hall 5544BLK is a strong, black 12 mm chipboard screw. With a flat filler head and a PZ 2 drive, this screw offers reliable and neat fastening for a variety of applications.
The Adam Hall 5660 is an M6 square nut suitable for 6161 aluminium back rails. Made of galvanised steel for long-lasting performance in rack mounts.
The Penn Elcom B1130-25 brace has a 2mm as well as a 5mm internal radius, making it that bit more flexible. It's made of steel and comes with four 5mm pre-drilled mounting holes.
The Adam Hall 40407 corner bracket is a sturdy 30 x 24 mm metal bracket, perfect for reinforcing corners in structures. The galvanised steel ensures long life and strength.
A metal protective corner with pre-drilled holes. This Penn Elcom protective corner has a galvanised finish.
This Penn Elcom zinc corner bracket has two pre-drilled holes and two rounded-off ends. It’s size is 32.2 x 19 mm and it is made of 1.2mm steel.
The Penn Elcom B3001 steel mounting bracket is made for securing boards and panels inside flight cases. It's made of 1.2mm steel and is 17.5mm long (horizontally).
The Adam Hall 5621 is a black plastic flat washer with no rim. Suitable for various applications, with an outer diameter of 12 mm and an inner diameter of 6.4 mm.
Lockable M6 x 25 mm galvanised steel screw, ideal for mounting enclosures, rack rails, doors, etc.
