If you have a Pioneer CDJ-2000, you will want to take good care of it. To make this easier, Decksaver has created special covers that fit the CDJ-2000 and CDJ-2000 nexus precisely and provide optimal protection.
Decksaver products are renowned world-wide for their excellent fit and protection. This particular dust cover has been designed to keep the Reloop RP-8000 direct-drive turntable free from dust and dirt.
protect your Pioneer DJM-450 DJ mixer with this rugged dust cover by Decksaver! It's custom-made and fits this mixer like a glove, keeping it free of dust, dirt, bumps, and scratches!
Hermetically seal your Pioneer DJ DJM-V10 inside the custom-moulded and near-indestructible Decksaver dust cover. Made from high-grade polycarbonate, this transparent protective bubble counters dust, dirt and even moisture.
Protect your Pioneer CDJ-2000 NXS2 media player when not in use, before and after your performance, and on the road with the Decksaver dust cover.
Protect your precious Pioneer DJM-S7 DJ mixer with this custom-made dust cover from Decksaver. This dust cover offers protection for when you transport or store your mixer.
There is also a custom-made dust cover for your Numark Mixstream Pro from Decksaver. It protects the vulnerable parts on your controller from moisture, dirt, bumps and scratches.
To protect the travelling DJ's gear, a suitable dust cover is an elegant, cost-effective solution. It prevents damage from dust, moisture or unfortunate knocks on your fragile Inpulse 500 DJ controller.
The Decksaver Pioneer DDJ-800 is specially designed for DJs who spend a lot of time travelling with their gear. The perfect fit offered by the robust, polycarbonate cover diligently protect your controller's most vulnerable knobs and controls.
If you're keeping a Pioneer DJS-1000 by your side, getting the option to shield it with a Decksaver should be a no-brainer. Made of ultra-strong polycarbonate, this custom dust cover ensures superb scratch protection.
Protects your Akai MPC XL from dust, liquids and knocks in the studio.
The Decksaver DDJ-XP1 dust cover keeps your Pioneer DJ controller guarded against dust, dirt and scratches while it's in transit or storage. It offers a seamless yet friction-free fit and makes for a smart investment if you want your Pioneer DJ DDJ-XP1 (or DDJ-XP2) to last as long as possible.
This Decksaver dust cover has been custom moulded to fit the Arturia Beatstep Pro controller, keeping those sensitive controls free of dust, dirt, damage and moisture.
Unfortunately, analogue gear is just as good at attracting dust as it is at conjuring thick, lush sound. But luckily, you can always get a tailor-made Decksaver dust cover like this one for the Korg Minilogue synthesizer.
Since nothing's worse than jamming jogwheels, sticky buttons and faltering electronics, Decksaver serve up this custom dust cover for your Pioneer DJ XDJ-700.
This dust cover is made of polycarbonate and has been designed to protect the CDJ 850 tabletop player. It's ideal for use in clubs or private DJ booths, where a flightcase is too hefty, too large and too heavy.
The third-gen Native Instruments Kontrol S61 is more versatile than any of its predecessors — all the more reason to keep it safe and sound with a matching Decksaver.
Hermetically seal your Pioneer DJ DDJ-FLX10 inside the custom-moulded and near-indestructible Decksaver dust cover. Made from high-grade polycarbonate, this transparent protective bubble counters dust, dirt and even moisture.
Kit out your Boss RC-505 MK2 loop station with professional protection thanks to the near-indestructible, custom-moulded and form-fitting Decksaver dust cover.
Fully seal up and protect the sensitive controls of your Roland SP-404 MK2 from dust, fluff, dirt, and moisture when it's not in use thanks to this custom-moulded, semi-transparent dust cover.
To prevent your Numark Mixtrack Pro FX or Mixtrack Platinum FX DJ controller from getting damaged by dirt, dust, moisture or impact damage, you can protect it from this using this Decksaver dust cover.
You can use the Decksaver universal dust cover for Boss stompboxes to protect your Boss single unit stompbox from dust, bumps and scratches. This is a close-fitting, transparent dust cover.
Sturdy polycarbonate dust cover for Behringer WING Compact, protects against dust, liquids and impacts.
If you have invested in the UDO Audio Super 6 Desktop, you probably want to be able to enjoy it for a long time, without damaging any parts. With this dust cover from Decksaver, you'll protect the valuable synth.
Decksaver has custom-made this dust cover to protect your Vestax PDX-2000 or PDX-3000 turntable. A dust cover obviously protects not only from dust, but also from scratches, bumps, liquids and more
Protect the face of your Playdifferently Model 1.4 with this Decksaver and give dust and dirt no chance to harm your mixer
For the safety of your MIDI, a Decksaver is the ultimate solution. Suitable for Novation's Launchkey 37 MK3 and FLkey 37, this model protects against build-up of dust, dirt, liquids, bumps and scratches.
A specially shaped dust cover made from smoke-clear polycarbonate protects the RANE SYSTEM ONE DJ controller from dust, moisture and impact.
With a dust cover from Decksaver, you can protect your S2400 groovebox from Isla Instruments from dangers that could damage your audio equipment. The S2400 groovebox is quite an investment and thus worth protecting!
Dust may very well be the greatest enemy of your equipment. With this Decksaver dust cover you can protect your Pioneer DJM 2000 against dust, prolonging its life considerably.
For the Moog Matriarch synthesiser, this dust cover from Decksaver is a must-have accessory. This transparent cover protects your precious Matriarch from dust, moisture and unfortunate impact damage.
Protect your Denon DJ LC6000 Prime with this custom-made dust cover from Decksaver. It protects the fragile parts on the top against dust, moisture, dirt, bumps and scratches.
Hermetically seal your Inpulse 200 MK2 DJ controller inside the custom-moulded and near-indestructible Decksaver dust cover. Made from high-grade polycarbonate, this transparent protective bubble counters dust, dirt and even moisture.
Protects the delicate parts of your Reloop RP-7 turntable from dust and accidents – perfect for DJs who want to keep their gear in top condition.
Give your Akai MPC Live III the best possible protection against dust, liquids and knocks, wherever you’re producing.
Keeping your Pioneer DDJ-SP1 safe is easy with this Decksaver dust cover. It's been made to size from sturdy polycarbonate, and protects the controls and housing of your controller against dust, moisture and damage.
This Decksaver dust cover has been designed to protect your Pioneer CDJ-900 Nexus. Like all Decksaver products, it has been made to size and is nearly indestructible.
If you regularly take your Radius Two Valve DJ mixer on the road, it could use some extra protection. For that, there is this Decksaver, a custom-made dust cover made of sturdy polycarbonate.
To keep your Behringer MS-1 synthesizer shop-fresh and clear of dust, a durable, tailor-made cover is never a bad idea. This custom Decksaver dust cover is made of hard-wearing polycarbonate.
The Decksaver Pioneer XDJ-AERO dust cover combines looks with functionality. It keeps the space around your controller's vulnerable faders and jog wheels free from dust and dirt, keeping your gear in mint condition.
Finally, a custom-size dust cover for the Roland TR-808! Are you the proud owner of one of these coveted vintage drum machines? Now's your chance to provide it with the protection it deserves!
Decksaver dust cover for Boss 500 Series. Protects your Boss DD-500, MD-500, RV-500 or RC-500 from unfortunate bumps, scratches and moisture damage. The snug fit allows you to combine the hood with a bag.
This Decksaver protects your Nanobox from 1010 Music from various hazards that can damage your device.
The custom-made, transparent polycarbonate Decksaver dust cover for the Denon MC4000 DJ controller protects your gear from dirt, dust, and moisture while keeping it safe from getting scratched or dented!
This Decksaver dust cover keeps your S25 safe from dust, moisture and dirt, and can also take a hit. It's made of polycarbonate and has been made to size for the Native Instruments keyboard.
If you regularly travel with your Universal Audio Apollo X4 audio interface, it's not a bad idea to protect it with a decent dust cover. This Decksaver is custom-made and offers excellent protection.
This particular Decksaver is custom-made for the Tiptop Audio Mantis and shields your Mantis' Eurorack housing against dust, dirt and light impacts.
Custom made for the Denon SC5000M Prime, this Decksaver dust cover provides a seamless fit, keeping the jogwheel and sensitive controls dust free and shop fresh.
Filters
Filters