Electro Harmonix's MOP-D10 Isolated Power Supply allows you to power up to 10 effects pedals from 9 volts DC without experiencing humming noises. This is because all outputs are isolated.
The RockPower NT 10 12V DC Power Supply can be used to power one or more effect pedals or other small bits of kit. This 12V power supply has a 1000mA capacity.
The Yuer PR-07 Full Isolated Power Supply is a multi-power supply that allows you to power the effect pedals on your pedalboard.
With this multi-power supply from RockBoard, you connect as many as 8 effect pedals from 9V and two effect pedals from 18V. So in total, you can power 10 effect pedals.
The Palmer PWT 12 IEC Power Supply equips your pedalboard with no-less-then twelve individually isolated outputs, including two outputs that can be set to 6, 9, 12, 15 or 18 Volts to feed more awkward pedals.
Fitted out with sixteen isolated outputs, the RockBoard ISO Power Block V16 is extensive enough to power a fully packed pedalboard.
The popular Voodoo Lab Pedalpower 2 Plus is a versatile power adapter for your effect pedals. With a wide range of voltages and power capacities, the eight separate, isolated outputs can power almost any pedal.
The high-quality Pedal Power Mondo features Sag simulation and comes equipped with no less than 12 isolated outputs for your 100mA to 400mA 9-volt effect pedals, two of which can be even be used for 12V/400mA stompboxes.
The Voodoo Lab Pedal Power 3 Plus power block provides 12 isolated outputs, each able to deliver 500mA of juice to your pedal-packed board. If you need more, 2 X-LINK ports can be used to add a Pedal Power X4 of X8.
Did you lose or break the VOX DA5 adapter for your ToneLab ST multi-effect processor? No problem! The VOX KA259 will get you back in business.
The RockPower NT 4 Power Supply Adapter 9.6V DC power adapter provides DC power with a voltage of 9.6V and 300 mA of current.
J. Rockett's Juice Joint Bundle sets you up with a rugged effect pedal power distributor that can help feed up to seven 9V DC pedals without the noise you risk using daisy-chain.
JHS Pedals drop the Volture: a 9V sag effects pedal that you can stick between your fuzz, drive or distortion pedal and your power supply for the singular sound of a vintage stompbox powered by a battery that's running low.
