In this section, you'll find replacement parts for a great number of products in your lighting set such as barn doors for conventional lighting, replacement mirrors for scanners and cluster brackets for lighting effects.
Ayra 11648 Carry handle on base 310-01C-01 for Vision 360 BSW.
If the housing covers of your Ayra ERO 150BSW HEAD moving head have seen better days, simply replace them with the compatible Ayra 10142 cover set.
Mirror for Ayra TDC444 including bracket.
Ayra 11843 Side handle cover for Ayra ERO 706.
The Ayra 10774 Bracket Handle Screw is a compatible replacement part for the Ayra Compar 60 LED projector.
This Innox 11595 Rack mounting hardware pack is compatible with Base Line models and includes twenty-four bolts, twenty-four nuts and twenty-four washers.
The Ayra OSO240B is a 9V DC replacement power supply for Ayra OSO Series light controllers.
Using the Ayra 11616 bolt, the Ayra Compar laser unit can be securely mounted onto the main unit.
The Ayra 11629 Power Supply has a two-pin Euro Schuko plug at one end and a USB-A socket at the other. This adapter runs at 100V to 240V AC at 50/60 Hz and 2A.
In case of loss or damage, the Ayra 11591 Head Cover is a compatible replacement for the head cover that comes pre-fitted on the Ayra ERO 075 moving head.
The Ayra 10141 is a plastic cover set for the ERO 150BSW ARMS, or arms of this movinghead. This way you don't have to buy all the covers again if only these are broken!
The Ayra 11614 12V DC 1A centre-positive power supply is compatible with the Ayra DanceFX MoodTube. This is a spare part.
The Ayra 11630 Power Supply features a two-pin Euro Schuko plug and standard barrel plug with a centre-positive set-up.
This pack of two flat-head hex bolts are specifically designed to fit IVA MON-02 studio monitor stands, making them a great set of spares or replacements. This pack includes two bolts.
While lasers are a must-have when it comes to building spectacular lighting rigs, if something goes wrong, things can get dangerous. Add the American DJ Laser Emergency Switch and ensure maximum safety.
Arm cover 19FN-01C-05 for Vision 1940 PixZ-Bee RING.
Just in case any of the legs that came included with your DanceFx MoodTube have gone missing, this pack of three Ayra 11612 Plastic Legs are fully compatible replacements.
The Konig & Meyer 12257 AC power supply is compatible with various K&M FlexLights, including the 12242, 12244, 12245, 12246, 12247, 12248, 12249, 12270 and 12295.
Ayra 11647 Cover for base 310-01C-02 for Vision 360 BSW.
This big red button enables you to trigger special effects at the literal push of a button. It's compatible with almost every piece of Magic FX hardware.
Rear cover for the Ayra ERO 540 MKII.
Ayra ERO 540 MKII top, flat.
Turning your lasers off in one go is practical and necessary during accidents, so that things don't escalate. This Showtec Laser safety interlock is a striking emergency button, that turns of your laser show with one press.
Bracket set for the Ayra ComPar 30.
The Ayra 10867 is a spare mounting hardware set for the Ayra TDC Sunrise. It includes the two bolts, two nuts and two rings needed to secure the unit to a compatible bracket (not included).
Front cover, part of the housing of the Ayra ERO L90 moving head.
Red laser diode for GRONO laser series.
Remote control for the Ayra Gobo Star laser, including battery.
Main PCB for the LEDs of the Ayra ERO 3108.
Position sensor for the Ayra ERO101 moving head.
Complete power supply for the Ayra ERO101 moving head.
Receiver PCB for the wireless receiver in the device.
Ayra ERO 540 MKII top, round.
Lens cap for the Ayra ERO 540 MKII.
Ayra ITA03 green laser
ComPar Kit 1+2 main PCB board for Ayra ComPar Kit 1+2 light effect installation.
