Black Neutrik BSTP10 grommet for bantam cable connectors.
The Neutrik PCR3 is an orange code ring for Neutrik jack connectors (NP2C/NP3C).
The Neutrik PCR7 is a violet code ring for Neutrik jack connectors (NP2C/NP3C).
Neutrik's KMX features an internet M17x1 thread.
Neutrik's NM P MF is a behuzing for RCA and Phono connectors.
The Neutrik NC5MRX-B male XLR plug has an angled, 5-pin design and comes gold-plated for increased corrosion resistance. Perfect for crafting custom XLR cables.
Neutrik's GN18 is a gooseneck that's made of a stainless steel spiral with a black coating (to prevent corrosion and noise).
Neutrik's GN36 is a gooseneck made of a stainless steel spiral with a black coating (to prevent corrosion and noise).
The GF1 by Neutrik can be placed on a flat surface.
Dust and water resistant, the five-metre-long Neutrik NKHDMI-5 HDMI cable has been fitted with shielded contacts and boasts a push-pull connection.
The Neutrik NBNC 75 BLS 7 meets the highest HD standard. It also has a nickel housing and a plastic exterior.
This Neutrik KM from Neutrik is a loose enclosure module (long version) fitted with M17 x 1 internal thread.
Neutrik's NBNC 75 BQP 11 features a nickel housing and plastic exterior. This rear-twist design ensures easy assembly. It meets the highest HD standard.
Neutrik is one of the most trusted names in cables and connectors for sound and lighting applications. This NKUSB-3 cable is 3 metres long, USB 2.0 compatible with a data rate of up to 480MBit/sec.
Need a straight-up USB-A to USB-B cable? Get one from one of the most trusted names in the world of audio cables, Neutrik, and get the 5-metre long NKUSB-5 USB 2.0 cable.
The Neutrik NCJ10FI-S chassis socket is a combination 3-pole XLR and 6.3mm stereo jack with switch, equipped with switchable earth contact. It has silver-plated contacts in and black housing.
Finished off with the neatly angled Neutrik NC4MRX-B 4-pin M-XLR cable connector, easily plug into tighter and harder to reach connection ports. This XLR plug features gold-plated contacts and comes protected by a solid metal housing.
The NP3TT2 is suitable for pro audio applications. This connector has 4.4mm jack connectors. The connector has a black plastic housing and nickel contacts.
Neutrik always guarantees optimum quality connectors. They have shown this again with the BNC 75 BZV14, a BNC male plug with crimp sleeve. It is suitable for Belden 1794A cable.
The DIE-R-BNC-PG is designed for use with Neutrik's HX-R-BNC.
The Neutrik CAS-FOCD-ADV cleaning case makes it easy to keep your important cables and connectors clean, with a comprehensive set of cleaning agents and a microscope.
For quality, Neutrik is always the right choice. The same goes for this Premium Power Cord with PowerCON TRUE1 connectors and a high-quality 3-core conductor (1.5 mm² cross section).
With this powercord from Neutrik from the Premium collection, you have a European-made powercord with a male powerCON TRUE1 plug and a female schuko, moulded connectors, breaking capacity and 3x2.5 mm² cross section.
Want both the high quality of a Neutrik power cord with powerCON True1 connector and the freedom to choose your own power plug? Then choose this power cord with powerCON TRUE1 on the one hand and open end on the other.
Safe, reliable and functioning at the high Neutrik level: behold this power cord from Neutrik's Essential Series. With moulded connectors, a Schuko and powerCON FXXA plug, with anti-kink and breaking capacity.
A reliable, safe powercord that meets Neutrik's high standards. That sums up this Essentials Series powercord, with schuko, powerCON FXXA, cable breakage protection and circuit breaking capacity.
When you buy a cable from Neutrik, you know you've got quality. So too with this Power Cord, equipped with two powerCON TRUE1 connectors, a three-core conductor (3x2.5mm²) and circuit breaker.
With a Power Cord from the renowned Neutrik, your power supply is in good hands. You connect equipment fitted with a PowerCON connection effortlessly with this quality cable.
Because a stable, safe and reliable power supply is very important, you better have a cable you can rely on, like this Power Cord from Neutrik with PowerCON TRUE1 connector and a straight schuko.
for Ethercon A & BA series female chassis connectors
code ring brown for Ethercon A & BA series male chassis connectors
Neutrik BSE-1 brown colour tulle.
The PCR1 is a brown code ring for Neutrik jack connectors (NP2C/NP3C).
You can use this cover cap to cover male XLR chassis parts from the True Outdoor Protection (TOP) series waterproof and dustproof.
Neutrik BSE-8 grey colour tulle.
Neutrik BSE-9 white colour tulle.
Neutrik's BPX-L is a large bushing with nylon chuck type strain relief for NP-X series connectors. It is fit for cables with an external diameter of 8mm.
