When you need to bridge very little space, Sennheiser's GZL RG 58 - 0.25M is a very practical accessory. This short 25-centimetre antenna cable is equipped with two solid BNC connectors.
Sennheiser's AB 4-DW is an antenna booster that boosts the filtered signal by 12dB and is compatible with Sennheiser's EM 100 G4 or EM 300-500 G4. The frequency range of this AB 4-DW is 790-865 Mhz.
Sennheiser's AWM 2 MK II allows the two supplied 1G9 antennas to be permanently installed on a wall or, if necessary, temporarily on a tripod. Suitable for Sennheiser SL DW receivers.
Sennheiser's CL 1 PP is a 1-metre antenna cable. This black cable is equipped with 2 pieces of gold-coloured Reverse SMA connectors. Suitable for Sennheiser SL receiver and AMW-2 or AMW-4 antenna.
The Sennheiser CL 10 PP is a 10-metre coaxial antenna cable with two gold-coloured Reverse SMA plugs. Compatible with Sennheiser SL receiver (Speech Line) and also with AMW-2 and AMW-4 antenna.
Sennheiser's CL 20 PP cable with Reverse SMA plugs is as long as 20 metres and is suitable for use with the Sennheiser SL receiver (Speech Line) and the AMW-2 and AMW-4 antennas.
Sennheiser's CL 5 PP 5-metre antenna cable is equipped with two gold-coloured Reverse SMA connectors. Compatible with the Sennheiser SL receiver or AMW-2 or AMW-4 antenna.
The Sennheiser AWM is an active antenna for EW-D series wireless microphones. Attach this box to a wall or ceiling and extend the range of your system! Ideal for fixed installations.
The Sennheiser EW-D ASA antenna splitter is an absolute essential when working with multiple Evolution Wireless Digital systems. Hook up four EW-D EM receivers to the two antennas and supply them with power.
The Sennheiser SL PASC 4 is a passive 4-way antenna splitter designed for the SpeechLine Digital Wireless series.
This original Sennheiser cable is mostly used to connect antenna splitters to receivers. It has a length of 0.5 metres and is equipped with BNC connectors on both sides.
The Shure UA806 is a coaxial cable with two BNC plugs. You can use it to connect an extra antenna, or as an extension cable for antennas.
The Shure UA221 is a passive antenna splitter/combiner kit. Use it to split an incoming signal into two outgoing signals, or to combine two incoming signals into a single signal.
The Shure UA825 is a coaxial cable with two BNC plugs. You can use it to connect an extra antenna, or as an extension cable for antennas.
The Shure UA860SWB is a 1/2 wave antenna that improves the reception of the Shure SLX, ULX, LIC, UHF and UHF-R, allowing for a better reception.
The Shure UA505 remote antenna mounting bracket kit allows you to place your Shure 1/2 wave antenna's wherever you want for improved reception and easier access!
The Shure UA440 antenna rack mount kit allows you to move the antennas of your Shure wireless receiver to the front of your 19" rack for easy access and enhanced reception.
UA600 front mount antenna kit for Shure SLX4, ULX4, UR4S and UR4D receivers.
The Shure UA802 is a coaxial cable with two BNC plugs. You can use it to connect an extra antenna, or as an extension cable for antennas.
The Shure UA850 is a coaxial cable with two BNC plugs, which can, for instance, be used for connecting additional antennas or as an extension cable for antennas.
The Shure UA8100 is a coaxial cable with two BNC plugs, which can, for instance, be used for connecting additional antennas or as an extension cable for antennas.
This is the perfect replacement antenna for your UR1 system. Its has a frequency range of 470 - 542 MHz.
This replacement antenna is the perfect spare for the Shure UR1 wireless system. Designed for the 596-692 MHz frequency band.
The GZL 5000 A 10 is a BNC cable for the connection between an ASP-2 antenna splitter and a direction-sensitive antenna. Length: 10 metres.
The Sennheiser AWM 4 creates better coverage for your 1.9 GHz SL DW receiver in an unobtrusive way. This is because this antenna has a low profile and can be mounted flat against a wall.
The Shure UA806-RSMA is an SMA coaxial cable with reverse polarity. It is possible to use this 180 cm cable to mount antennas at longer distances on GLX-D wireless systems.
The HALF WAVE DIPOLE from Sennheiser is a set of 2 antennas with BNC connector. These antennas are suitable for connecting to an EW-D EM or EW-DX EM2 receiver.
Looking to improve your wireless signal strength? The Shure PA805DB-RSMA Dual Band Passive Directional Antenna boosts the reception of GLXD4R+ half-rack receivers and GLXD+ FMDB Dual Band Frequency Managers by up to 8dB.
The Shure UA221DB-RSMA passive antenna splitter splits an incoming signal into two output signals, allowing two GLXD4R+ receivers to share a single pair of antennas.
If your wireless Sennheiser system is suffering from interference in a more difficult environment, you can amplify the signal with 4 dB with this Sennheiser AD 1800 passive directional antenna to increase the range.
The Shure UA505-RSMA mounting bracket refers to a set of spare parts for mounting the UA8-RSMA and PA805Z2-RSMA antennas.
The Shure UA730 is a spare antenna for the UR1, UR1H or UR1M, so that if the original breaks, you always have a replacement.
The Shure HA-8089 helical antenna is an advanced type of directional antenna. Instead of the usual 100-degree beamwidth of a directional antenna, this helical antenna boasts a beamwidth of only 50 degrees.
Shure UA700-V VHF beltpack antenna for ULX-D/QLX-D VHF beltpacks.
Shure UA8-174-216 1/2 wave dipole antenna part (174 - 216 MHz). This antenna is suitable for Axient, UHF-R, ULX-D, ULX, SLX and BLX4R receivers and PSM1000 and PSM900 transmitters of the same frequency.
The Shure HA-8091 Domed Helical antenna is a domed helical antenna that delivers unmatched, drop-out-free wireless performance for wireless in-ear monitor systems, microphone systems and intercoms.
The Shure UA825-RSMA refers to an SMA coaxial cable with reverse polarity. It is possible to use this 7.6 cm cable to mount antennas at longer distances on GLX-D wireless systems.
The Shure UA850-RSMA refers to an SMA coaxial cable with reverse polarity. It is possible to use this 15.2 m cable to mount antennas at longer distances on GLX-D wireless systems.
The Shure UA8100-RSMA refers to an SMA coaxial cable with reverse polarity. It is possible to use this 30.5m cable to mount antennas at longer distances on GLX-D wireless systems.
The Shure PA821B-E Antenna Combiner accommodates up to eight BNC antenna signals, combining them on a single internal antenna. The result is a cleaner RF network and cleaner 19 inch rack that's no longer bristling with antennas.
The Shure PA411 antenna combiner powers and distributes the RF signal of up to four PSM300 transmitters.
With the rack-mountable GLXD+FM Dual Band Frequency Manager, a maximum of six GLXD4R+ receivers be linked, so that even more demanding multi-channel setups can be guaranteed solid and reliable RF performance.
New dual-band omnidirectional 45º antenna for use with GLX-D+ dual-band digital wireless systems. Compatible with GLXD4R+ receiver and GLXD+ FMDB Frequency Manager.
