▾

Devine B118A MKII Active Subwoofer with 3-Channel Amplifier

Discontinued, this product can no longer be ordered.

No alternatives found

Product information
Reviews (26)
Downloads (3)

Devine B118A MKII Active Subwoofer with 3-Channel Amplifier
Product no: 9000-0012-2114 Bax Music Warranty: This product comes with a 3-year warranty.

General

The B118A MKII subwoofer is the ultimate companion for the Devine Trono 12 and Trono 15 speakers. This powerful subwoofer is equipped with an amplifier module, which not only powers its own components, but also features two amplified outputs for two additional passive speakers. That means you don't need any additional amplifiers or peripherals - great for mobile DJs! Add the B118A MKII subwoofer to your setup and you'll notice that the lower frequencies take a much more prominent place in your sound. Combine the subwoofer with the Trono 12 or Trono 15 for an optimal result.

The Technology of the B118A MKII Subwoofer

The B118A MKII subwoofer features a rugged 18-inch woofer, equipped with a 4-inch voice coil and a 100oz magnet. It is powered by a 540W amplifier module, which uses approximately 300 Watts for the subwoofer, leaving you with enough power to create a nice 2.1 setup of one B118A and two Tronos.

The Devine B118A MKII Subwoofer in Practice

The B118A MKII provides you with plenty of creative ways to set up your sound system. Are you hosting a small party? Simply connect two Trono speakers to a single subwoofer. Are you organising a bigger event? Connect a single Trono to a single subwoofer for each side. Are you hosting a big party that could do with some more high-frequency projection, or would you simply like a complete speaker stack? Go for two subwoofers, each with its own set of Tronos. The options are numerous!

Tips or comments about this product

Please note:

Connecting additional passive subwoofers is not recommended, as the outputs have been optimised for full-range speakers such as the Trono 12 and Trono 15.
Only 8 Ohm passive speakers can be connected to the amplifier outputs.
The subwoofer is supplied as a single unit. The other speakers and accessories have merely been pictured for illustrative purposes and will not be included.
The pictured setups and product ranges merely serve illustrative purposes - only the subwoofer and the matching power cable will be delivered.
This MKII edition is equipped with a redesigned woofer and a different crossover filter.
The MKI version is pictured, but the MKII version looks exactly the same.

Specifications

Product features

Speaker connections	6.3 mm TRS input, XLR input
Mid driver/woofer diameter	18 inches
Sustainable product	not specified
Weight per speaker	50 kg
Maximum SPL	not specified
Maximum subwoofer frequency	> 500 Hz
Minimum frequency	35 - 39 Hz
RMS power in watts	500 - 749 W
Locking speaker connectors	yes

Weight and dimensions including packaging

Weight (incl. packaging)	53,2 kg
Dimensions (incl. packaging)	76,0 x 60,0 x 58,0 cm

Product specifications

active 18-inch subwoofer
built-in three-channel amplifier module with support for 2.1 setups
perfect addition to the Trono 12 or 15
can also be used in combination with other speakers
rugged wooden construction
lined with black damping felt
synthetic handle on each side
metal 35mm flange for distance rod
sturdy metal grille
18-inch woofer with 4-inch voice coil and 100oz magnet
crossover frequency: 112 kHz, 24 dB/oct
full-range satellite outputs
sensitivity: 98 dB (+/- 2 dB)
impedance: 8 Ohms
built-in 540W 3-channel amplifier module (300W sub + 240W additional output)
two passive speakers can be connected by means of locking speaker connectors
subwoofer level + main level volume controls for optimal balance
line input via balanced XLR and 6.35mm jack plug connectors
line inputs can also be used as line outputs
0 to 180-degree phase switch
IEC power connector
mains power: 110/230 V AC, 50/60 Hz
on/off switch
dimensions: 705 x 565 x 535 mm
weight: 50 kg

A review can no longer be written about this item