The Allparts EP-0286-000 500K DPDT Push Pull Audio Potentiometer features a 500 KOhm resistance and a variable push-pull function.
The Allparts EP-0886-000 CTS 500K Solid Shaft Audio Pot is a logarithmic potentiometer that goes well with humbucker pickups.
The Allparts MK-0110-010 Chrome Dome Knobs are compatible with solid-shaft potentiometers and are secured with a little screw. This type of knob is mainly found on Telecasters.
Got a Jazz Bass with knobs that need replacing? The Allparts PK-0174-023 Black Knob Set gets you one small and two large replacement knobs so you can refresh the look and feel of your J-style bass.
The Allparts AP-0600-001 Nickel Neckplate has a classic blank finish, making it a great replacement part for electric guitars and basses with a bolt-on neck.
With the Bullet guitar jack tightener, you can safely tighten your guitar's jack output without causing damage to vulnerable solder joints or the shaft itself. Simple but effective!
Humbucking bass neck pickup with chrome cover and ceramic magnet for a full, hum-free sound.
Humbucking bridge pickup with ceramic magnet and chrome finish.
Hofner style bass pickup with chrome cover and 6.4K ohm ceramic magnet.
Wired control plate for Hofner-style bass with 2 volume knobs and 3 switches.
Winding set for Jazz Bass® neck pickups with AlNiCo5 magnets and vintage wire covering.
Winding set for Jazz Bass® bridge pickups with AlNiCo 5 magnets and vintage wire covering.
Economy distortion humbucker with 14.0K output, including mounting ring.
Set of 2 Gold Foil elements with chrome housing for guitar.
Danelectro "Original" LP1 lipstick element with chrome cover and 4.0K ohms.
Danelectro "Yesteryear" LP2 lipstick element with "aged magnet", chrome cover and 7.4K ohms.
Hofner-style guitar element with chrome cover, Alnico V magnets and 6.4K ohms.
Create your own Tele® bridge pickup with AlNiCo 5 magnets with this winding set.
With this winding kit, you create your own Strat® neck/bridge pickup with AlNiCo 5 magnets.
Create your own Strat® centre pickup with reverse polarity for a hum-cancelling tone.
Complete kit for making a humbucker with 52.8mm spacing (F-spaced).
Winding set for humbucker pickups with 50mm spacing, includes all parts.
Complete element-winding kit for building your own humbucker with 49.2mm pole spacing.
Make your own P90 pickup with this complete winding kit.
Start your own custom pickup production with the AllParts Filtertron winding kit for bridge 51mm.
AllParts PU-6812-010 element-winding kit for Filtertron neck 48mm, includes everything but wire.
Complete set for winding Jaguar® pickups, including flatwork and magnets.
Steel grounding plate for Tele bridge pickup.
Black plastic coil for a soapbar P-90 element.
Gold On-On-On mini switch with mounting hardware.
On-On-On mini switch, DPDT, with mounting hardware, black.
On-On-On mini switch, DPDT, with mounting hardware, chrome.
AllParts EP-0081-002 gold On-On mini switch for electronic use.
AllParts EP-0081-010 chrome On-On mini switch for electronic use.
AllParts EP-0082-002 gold On-Off-On mini switch for electronic use.
AllParts EP-0082-003 black On-Off-On mini switch for electronic use.
AllParts EP-0082-010 chrome On-Off-On mini switch for electronic use.
6-position rotary switch for electric guitars, 4-pole, reliable switching.
A sturdy On-On-On mini switch with round lever and mounting hardware.
Chrome-coloured On-On-On mini switch with round lever and mounting material.
Black On-On mini switch with round lever and mounting hardware.
4-pole On-On-On mini switch with 12 terminals, including mounting material.
3-way short toggle switch, ideal for guitar with thin body and two pickups.
Economic Korean toggle switch with knob, ideal for guitars.
3-way switch for import guitars with plastic housing and screws.
5-position 4-pole rotary switch for electric guitars with solid shaft.
Set of 2 hex spanners (2.5mm and 3.0mm) for adjusting Floyd Rose tremolo systems.
7 mm truss rod spanner with screwdriver end and rubber grip.
