▾

Devine MX-1200 2-Channel PA Power Amplifier, 2x 600W at 8 Ohms

Discontinued, this product can no longer be ordered.

No alternatives found

Product information
360° Photo
Reviews (1)

Devine MX-1200 2-Channel PA Power Amplifier, 2x 600W at 8 Ohms
Product no: 9000-0095-1190 Bax Music Warranty: This product comes with a 3-year warranty.

General

Designed to provide passive speakers with ample headroom, the hefty Devine MX-1200 PA two-channel power amplifier supplies 600 Watts per channel at 8 Ohms or 900 Watts per channel at 4 Ohms, and in Bridged mode, gives you 1200 Watts at 8 Ohms to accommodate a hefty passive subwoofer. Connect your passive speakers up via the wire terminals or SpeakON ports found on the rear panel and be assured of a secure setup thanks to a built-in limiter and protection circuit. Meanwhile, your external audio sources are hooked up via balanced XLR ports to ensure clean sound, even when using longer cables, while a set of RCA ports is also provided for unbalanced audio signals.

Tips or comments about this product

Please note: This Devine amplifier is compatible with passive speakers with the following specifications:
- passive full-range speakers, power rating: +/- 400W at 8 Ohm
- passive subwoofers, power rating: +/- 300W at 8 Ohm

Specifications

Product features

19-inch rack size	2U
2-ohm compatible	no
Number of amplifier channels	2
Audio loop output	no
Bridge mode	yes
Sustainable product	not specified
Input	RCA, RCA + XLR, XLR
Built-in filter	none
Built-in protection	overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in DSP processor	no
Cooling	ventilator
RMS power (4 ohms) per channel	900 - 999 watts
RMS power (at 8 Ohms) per channel	600 - 699 Watts
Amplifier class	H
Amplifier output	locking speaker connector, wire clamps
Equipped with crossover	no

Weight and dimensions including packaging

Weight (incl. packaging)	15,0 kg
Dimensions (incl. packaging)	54,0 x 42,0 x 14,0 cm

Product specifications

power (RMS):
- 2x 600W at 8 Ohms
- 2x 900W at 4 Ohms
- bridged at 8 Ohm: 1x 1200W
Class-H
frequency response: 20Hz - 20kHz
input sensitivity: 1.4V / 0.775V
input impedance: 20 kOhm / 10 kOhm
damping factor: >200
S/N ratio: >100 dB
power supply: 220 - 240V AC, 50/60 Hz
connections:
- inputs: XLR (balanced), RCA (unbalanced)
- speaker outputs: 2x speakON + wire terminals
- bridged outputs: 1x wire terminal
Ground Lift function
dimensions (W x D x H): 48.2 x 37 x 8.8cm (2 U/HE)
weight: 14.5 kg