▾

Devine MX-200 2-Channel PA Power Amplifier, 2x 100W at 8 Ohms

Discontinued, this product can no longer be ordered.

No alternatives found

Product information
360° Photo
Reviews (3)

Devine MX-200 2-Channel PA Power Amplifier, 2x 100W at 8 Ohms
Product no: 9000-0095-0911 Bax Music Warranty: This product comes with a 3-year warranty.

General

Designed to power passive speakers or subwoofers, the hefty Devine MX-200 PA two-channel power amplifier supplies both SpeakOn and wire terminal connection ports, making it compatible with most models. Audio sources can be plugged in via a set of balanced XLR and TRS ports so longer cables can be used without fear of signal loss, and to complete a professional setup, this amplifier comes pre-fitted with a set of rack ears so it can be neatly installed in a 19 inch rack or flight case.

Tips or comments about this product

Please note: This Devine amplifier is compatible with passive speakers with the following specifications:
- passive full-range speakers, power rating: +/- 66W at 8 Ohm
- passive subwoofers, power rating: +/- 50W at 8 Ohm

Specifications

Product features

19-inch rack size	2U
2-ohm compatible	no
Number of amplifier channels	2
Audio loop output	no
Bridge mode	yes
Sustainable product	not specified
Input	jack (6.3 mm), jack (6.3 mm) + XLR, XLR
Built-in filter	none
Built-in protection	overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in DSP processor	no
Cooling	ventilator
RMS power (4 ohms) per channel	150 - 199 watts
RMS power (at 8 Ohms) per channel	100 - 149 Watts
Amplifier class	AB
Amplifier output	locking speaker connector, wire clamps
Equipped with crossover	no

Weight and dimensions including packaging

Weight (incl. packaging)	10,0 kg
Dimensions (incl. packaging)	58,5 x 51,0 x 14,5 cm

Product specifications

power (RMS):
- 8 Ohms: 2x 100W
- 4 Ohms: 2x 150W
- bridged at 8 Ohm: 1x 200W
Class AB
frequency response: 20Hz - 20kHz
input sensitivity: 1.4V / 32dB / 1.0V
input impedance: 20 kOhm / 10 kOhm
damping factor: >350
S/N ratio: >95dB
power supply: 220 - 240V AC, 50/60 Hz
connections:
- inputs: XLR/TRS (balanced)
- speaker outputs: 2x speakON + wire terminals
- bridged outputs: 1x speakON, optional
Ground Lift function
dimensions (W x D x H): 48.2 x 32.1 x 8.8cm (2 U/HE)
weight: 9 kg

A review can no longer be written about this item

Reviews from other countries

Translate all reviews into English View original reviews

Anthonie Jonai February 21, 2026

Wrote the following about Devine MX-200 2-Channel PA Power Amplifier, 2x 100W at 8 Ohms

Power machine.Gaat op een 300 Watt mid speaker en een 600 Watt basspijp (18 inch) speaker niet in de vervorming of clip.Erg tevreden.Prima dus.

Guido Smoorenburg April 10, 2024

Wrote the following about Devine MX-200 2-Channel PA Power Amplifier, 2x 100W at 8 Ohms

Ventilatie te luidruchtig, desktops zijn tegenwoordig veel stiller

Lahoucine April 14, 2023

Wrote the following about Devine MX-200 2-Channel PA Power Amplifier, 2x 100W at 8 Ohms

Bon produit qui répond à mes attentes pour l'application que j'en fait ( dans une petite mosquée public adresse ).
Je déplore l'absence du mode parallèle, il faut obligatoirement entrée deux sources afin de contrôler des deux zones en sortie.
Sinon, R.A.S. ,il fait le job , à voir Ur le long terme !