- Home /
- All products /
- Lighting & Special Effects /
- Lighting Controllers & Dimmer/Switch Packs /
- DMX Lighting Controllers /
- Ayra /
- Ayra DMX controller bundle
Ayra DMX controller bundle
lar
Ayra OSO Com 6 DMX Lighting Controller :This product comes with a 3-year warranty.
:This product comes with a 3-year warranty.
:This product comes with a 3-year warranty.
Devine MIC100/10 XLR microphone/signal cable, 10m :This product comes with a manufacturing defects warranty.
General
Perhaps you've been given light effects for your birthday or maybe you purchased them yourself. Alternatively, you might have a smoke machine, a laser or something similar laying around? If so, there's a fair chance you want to control these yourself so what's better than a complete and affordable set of tools to do it with? This Ayra DMX controller bundle consists of a modest DMX controller for simple light effects using only six faders. You also get two special life-savers in the form a DMX tester and a DMX terminator. The DMX tester does what its name suggests: test the DMX signal running through the cable. In the case of unresponsive light effects the DMX tester is able to rule out cable issues. The DMX terminal is a correct way to close off the DMX chain. DMX signals can be routed through a daisy chain scheme after all. Without a terminator in place you risk the malfunctioning of your lights. This bundle is completed with a DMX cable allowing you to instantly hook up your own light effects to the controller.
Specifications
1x Ayra OSO Com 6 DMX Lighting Controller
The Ayra OSO COM 6 is a simple and practical DMX lighting control for applications such as RGP LED lighting in the form of strips, spotlights, bars or projectors. Can also be battery powered.
Product features
- 19 inches no
- Number of DMX light control channels 6
- Deals for light technicians
- Joystick no
Weight and dimensions including packaging
- Weight (incl. packaging) 993 gr
- Dimensions (incl. packaging) 24.0 x 20.0 x 9.0 cm
Product specifications
- 6-channel DMX lighting control
- equipped with a master fader
- designed for adjusting DMX values on a maximum of 6 channels
- fit for (LED) pars, strips, spotlights and other lighting that has to be dimmed with 1 or more channels
- also fit for various special effect products
- can be mounted on a wall via the mounting points at the underside
- mains voltage: 230V AC, 50 Hz
- works with 9V rectangular battery (not included)
- operating voltage: 9V DC, 100mA
- DMX output: 3-pin XLR connector
- Power LED indicator
- dimensions: 180 x 135 x 55 mm
- weight: 0.8 kg
1x
The Ayra DMX Terminator end of line resistor belongs in any DMX-driven light network. Insert it at the end of your chain to prevent disruptions.
Product features
- Deals for light technicians
Weight and dimensions including packaging
- Weight (incl. packaging) 34 gr
- Dimensions (incl. packaging) 12.0 x 2.0 x 9.0 cm
Product specifications
- DMX Terminator
- resistor between pins 2 and 3
- mounted in standard 3-pin XLR housing
- housing colour: black
- resistance: 110 Ohm
- equipped with embossed marking for quick recognition
- to prevent or solve disruptions in your DMX line
1x
The Ayra DMX Tester is an essential tool for the travelling light jockey. If the lights in your DMX network aren't functioning properly, plug the tester into your cable and see immediately if a DMX signal is detected.
Product features
- Deals for light technicians
Weight and dimensions including packaging
- Weight (incl. packaging) 34 gr
- Dimensions (incl. packaging) 13.0 x 2.0 x 9.0 cm
Product specifications
- DMX tester and terminator in one
- green LED indicator when data is being transferred
- red LED indicator for detected DMX signal
- mounted in a standard 3-pin XLR housing, epoxy finish on rear
- housing colour: black
- impedance: 110 ohm
- equipped with embossed marking for quick recognition
- to prevent or solve disruptions in your DMX line
1x Devine MIC100/10 XLR microphone/signal cable, 10m
Devine's MIC100 cable is the ideal cable for transmitting most signals from A to B. Because of the robust connectors and flexible yet durable cable, every signal is optimally transmitted.
Product features
- (partially) coiled no
- Deals for singers, light technicians, sound engineers
- Right angled or straight straight - straight
- Colour black
- Length 10.00 m
- Set no
- Type of audio connector XLR 3-pin
Weight and dimensions including packaging
- Weight (incl. packaging) 498 gr
- Dimensions (incl. packaging) 18.0 x 18.0 x 3.0 cm
Product specifications
- XLR male - XLR female
- suitable as microphone cable or as an all-round signal cable
- flexible, rugged cable
- high-grade connectors with locking option
- connectors with pull relief to prevent cable conductors from coming undone
- length: 10 m
- filling: cotton
- oxygen-free copper
- isolation diameter: 1.4 mm
- isolation colours: red and white
- number of conductors: 2
- inner conductor diameter: 0.226 mm²
- conductor dimensions: 20 x 0.12 mm
- helical sheathing: 0.12 x 64
- cable diameter: 6 mm
- sheathing material: flexible PVC
- operating temperature: -20 - +70° C
- capacity @ 1 kHz:
- cond.-cond.; 131pF/m
- cond.-shield.: 178pF/m
Reviews
Alternative products by other brands
Search all products in the category DMX Lighting Controllers
