Duratruss

Duratruss DT 34/3 HD 50 cm Extra Strong Square Truss, 50cm

Duratruss DT 34 3 050 square truss extra strong with 50 x 3 mm main tubes and 20 x 2 mm diagonals. Length is 50 cm.

Duratruss DT 34/3-C21-L90 2-Way Square Truss Corner, 500 mm

Duratruss DT 34 3 C21 L90 two-way square truss corner piece with a length of 500 mm. The four main tubes are 50 mm in diameter and have a wall thickness of 3 mm.

Duratruss DT 34/3-C41-X 4-Way Square Truss Cross, 500 mm

Duratruss DT 34 3 C41 X 4-way square truss cross with a length of 500 mm 90 degrees. Main tubes 50 mm in diameter with extra thick wall of 3 mm.

Duratruss DT 34/4 HD 150 cm Square Truss, 150cm with 4mm Tube Walls

Duratruss DT 34 4 150 square truss straight head tubes with a wall thickness of 4 mm and a diameter of 50 mm. Length 1500 mm.

Duratruss DT hinge spigot for DT 34H or DT 44H truss tower

With a set of four DT hinges, you can attach the sleeve of a Duratruss DT 34H or DT 44H to the top section of a truss tower. The Duratruss DT hinge does not represent much else than a spigot with a hinge.

Duratruss DT 31 HC Cube 1 half truss spigot

Duratruss DT 33 2.0 metres

The Duratruss DT 33 has main beams with a diameter of 50 mm and cross beams of 20 mm. The walls are 2 mm thick. This DT 33 truss has a length of 2.0 metres.

Duratruss DT 34 1.0 meter

The Duratruss DT 34 has main tubes with a diameter of 50 mm and cross tubes of 20 mm and their wall thickness is 2 mm. This DT 34 is one metre long.

Duratruss DT33 C21-L90 90-degree corner 0.5 m

The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This part consists of two tubes of 50 cm that have a 90-degree angle.

Duratruss DT 33 T36-T T-section

The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This T-section has a length of 0.5 metres.

Duratruss DT 33 C19-L45 45-degree corner 1m

The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This part consists of two 1-metre pieces in a 45-degree angle.

Duratruss DT 33 C23-L135 135-degree corner 50cm

The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This part consists of two tubes of 50 cm that have a 135-degree angle.