Duratruss

Duratruss DT hinge spigot for DT 34H or DT 44H truss tower

With a set of four DT hinges, you can attach the sleeve of a Duratruss DT 34H or DT 44H to the top section of a truss tower. The Duratruss DT hinge does not represent much else than a spigot with a hinge.

Duratruss DT 31 HC Cube 1 half truss spigot

Duratruss DT 34 HCBC coupling piece

The DT 34 HCBC coupling piece is a very special part from the Duratruss DT 34 series. It's specifically designed for the DT 34 box corner, in order to secure it other DT 34 components.

Duratruss DT Column Baseplate 80 x 80

With this exceptionally sturdy Duratruss baseplate, you can easily create large and stable totems. Because the plate is 80 x 80 cm and weighs only 10 kg, it's easy to transport.

Duratruss DT23 T36H truss T-piece horizontal

Connect three Duratruss DT23 truss elements together easily with the DT23 T36H T-piece that can be used in apex up, and horizontal apex down as well as vertically.

Duratruss DT23-WPM wall plate

The Duratruss DT23 series is one of the most popular truss systems because of its load capacity and construction. Use the DT23 wall plate to mount a truss element against a wall or ceiling.

Duratruss DT23 corner C19 45

This lightweight DT23 decorative truss, ideal for showrooms, pubs and restaurants, has all the charm of an actual truss. Its main tubes are just the right thickness, and easily distinguishable from the braces.

Duratruss DT23 corner C22 120

This lightweight DT23 decorative truss, ideal for showrooms, pubs and restaurants, has all the charm of an actual truss. Its main tubes are just the right thickness, and easily distinguishable from the braces.

Duratruss DT23 C25-L90 2-way corner 90° apex in

This lightweight DT23 decorative truss, ideal for showrooms, pubs and restaurants, has all the charm of an actual truss. Its main tubes are just the right thickness, and easily distinguishable from the braces.

Duratruss DT 34 0.5 metres

The Duratruss DT 34 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This DT 34 has a length of 0.5 metres and also goes by the name of DT 34-050.

Duratruss DT33 C21-L90 90-degree corner 0.5 m

The Duratruss DT 33 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This part consists of two tubes of 50 cm that have a 90-degree angle.

Duratruss DT 34 C41-X X-section

The Duratruss DT 34 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This DT 34 X-section allows for the connection of four other truss parts.