Not sure if the Prodipe TT1 Pro Lanen dynamic microphone + stand + cable is for you? Do a Choice Check.
Start Choice Checker
Prodipe TT1 Pro Lanen dynamic microphone + stand + cable
Product no: 9000-0032-4547
Bax Music Warranty:
Prodipe TT1 Pro Lanen dynamic microphone This product comes with a 3-year warranty.
Innox IVA 12 Microphone Stand (Black) This product comes with a manufacturing defects warranty.
Devine MIC100/10 XLR Microphone/Signal Cable, 10m This product comes with a manufacturing defects warranty.
General
Whether you're recording in the studio, performing on stage, or rehearsing with your band, the Prodipe TT1 Pro Lanen can handle it all. This microphone is not only surprisingly affordable, it also offers great quality. Even well-known studio engineer Ludovic Lanen swears by it, which proves this Prodipe mic offers the kind of quality a more expensive, high-end microphone would. This complete set comes with a rugged stand and a 5-metre-long XLR cable, which means you can plug this mic directly into an audio interface, a mixing console on stage, or a stage box, and you're good to go!
Specifications
1x Prodipe TT1 Pro Lanen dynamic microphone
This dynamic microphone is the product of engineer Ludovic Lanen and Prodipe. Ideal for vocals and speech, and considering the quality, we can say it has quite the competitive price tag. As it has no on/off switch, it’s great for stage use.
Product features
On/Off Switch
No
Microphone sensitivity (dBV/PA)
-49
Microphone weight
not specified
Microphone impedance
600-649 ohms
Maximum SPL
not specified
Maximum frequency
15 - 15.9 kHz
Microphone accessories
microphone clip
Microphone set
no
Minimum frequency
50 - 59 Hz
Polar pattern
cardioid
Audio connector
3-pin XLR
Weight and dimensions including packaging
Weight (incl. packaging)
500 gr
Dimensions (incl. packaging)
28,0 x 10,0 x 6,0 cm
Product specifications
Prodipe TT1 Pro Lanen
dynamic microphone
designer: studio engineer Ludovic Lanen
suited for: vocals, instruments
pickup pattern: cardioid
sensitivity: -49 dB (+/- 3 dB)
frequency response: 50 Hz - 15 kHz
output impedance: 600 ohms (+/- 30%)
connector: XLR
microphone clip included (3/8, 5/8 thread)
diameter: 48 mm
length: 185 mm
1x Innox IVA 12 Microphone Stand (Black)
The Innox IVA 12 is a solid, pro-grade microphone stand equipped with a large, ergonomic tightening knob that allows you to adjust the height of the stand while the three legs have been finished with rubber feet, keeping the whole thing nice and stable.
Product features
Number of stands
1
Sustainable product
not specified
Microphone stand weight
2 - 3 kg
Boom arm
yes
Height adjustable
yes
Colour
black
Stand material
steel
Maximum height of stand
200 to 210 cm
Included stand accessories
none
Mininum stand height
not specified
Screw thread size
5/8 inch
Set
no
Construction
2-part telescopic
Type of stand
boom stand
Type of stand base
flat base feet
Type of vlogging accessory
microphone stand / clip
Weight and dimensions including packaging
Weight (incl. packaging)
2,4 kg
Dimensions (incl. packaging)
86,5 x 11,0 x 8,0 cm
Product specifications
professional microphone stand
equipped with three stand legs with rubber feet
freely adjustable height
screw thread: 5/8-inch
freely adjustable boom arm length
vertical telescopic tube, ideal for overhead microphone setups
large, ergonomic tightening knobs
practical, collapsible construction
equipped with a practical cable management system
length when folded: 860mm
required floor surface when unfolded: 600mm
maximum height in overhead position: 2m
1x Devine MIC100/10 XLR Microphone/Signal Cable, 10m
Close any huge XLR signal-based gap with this 10-metre microphone/signal cable from Devine! Equipped with durable plugs and wrapped up inside fully flexible and protective sheathing, the MIC100/10 ensures solid, reliable signal transfer.
Product features
(partially) coiled
no
Sustainable product
not specified
Right angled or straight
straight - straight
Colour
black
Length
10.00 m
Set
no
Audio connector
3-pin XLR
Type of vlogging accessory
cable
Weight and dimensions including packaging
Weight (incl. packaging)
498 gr
Dimensions (incl. packaging)
24,0 x 24,0 x 4,0 cm
Product specifications
XLR male - XLR female
can be used as a microphone cable or as an all-round signal cable
supple, rugged cable
high-grade connectors with locking option
connectors with pull relief to retain contact integrity
length: 10m
filling: cotton
oxygen-free copper
isolation diameter: 1.4mm
isolation colours: red and white
number of conductors: 2
inner conductor diameter: 0.226mm²
conductor dimensions: 20 x 0.12mm
helical sheathing: 0.12 x 64
cable diameter: 6mm
sheathing material: flexible PVC
operating temperature: -20 - +70°C
capacity @ 1 kHz:
cond.-cond.: 131pF/m
cond.-shield.: 178pF/m
A review can no longer be written about this item
Gad July 17, 2024
5
Wrote the following about Devine MIC100/10 XLR Microphone/Signal Cable, 10m
Good quality, Customer service was very good and delivered within 3 days.
Thanks to bax music
Matthew W. February 14, 2021
5
Wrote the following about Innox IVA 12 Microphone Stand (Black)
Surprisingly good build quality for this price point, so I am impressed however do be aware, it is not that tall. This means that you can't sit on chairs with a particularly high seat, particular if you are tall. It should be find for most use cases, but just make sure you know what is going to be used for.
Matthew W. February 14, 2021
5
Wrote the following about Innox IVA 12 Microphone Stand (Black)
Surprisingly good build quality for this price point, so I am impressed however do be aware, it is not that tall. This means that you can't sit on chairs with a particularly high seat, particular if you are tall. It should be find for most use cases, but just make sure you know what is going to be used for.
Neil G October 27, 2020
5
Wrote the following about Innox IVA 12 Microphone Stand (Black)
Very happy with my purchase of this mic stand. Was pleasantly surprised of the build quality at this price range and would highly recommend.
Abigail A. August 25, 2020
5
Wrote the following about Innox IVA 12 Microphone Stand (Black)
strong and solid. awesome
HoganMW June 18, 2020
5
Wrote the following about Innox IVA 12 Microphone Stand (Black)
Wow !!!! Last week I got it and I have to say that quality is amazing for its price.
£15 is a steal
Greg S-R May 13, 2020
5
Wrote the following about Innox IVA 12 Microphone Stand (Black)
Very pleased, sturdy and solid stand for a great price.
Ash April 23, 2020
5
Wrote the following about Devine MIC100/10 XLR Microphone/Signal Cable, 10m
The package was sent promptly, arrived on time. I've been using this mic with the Beringer deq2496 also purchased from Bax music and it's working very well. Customer service was very good when I called to modify my order.
PestilenceKills March 4, 2020
5
Wrote the following about Innox IVA 12 Microphone Stand (Black)
Really impressed. Heavy, solid base, all the tightening screws feel good quality and I'm digging the giant knob - came with cable clips. Couldn't ask for more at this price.
Mac B. January 26, 2018
5
Wrote the following about Innox IVA 12 Microphone Stand (Black)
A very sturdy stand at an excellent price. Have paid more for stands that don't come close to the IVA 12 stand.