Extrusions are metal strips that are mounted on the edges of a flight case to keep it together and protect it. Here, you'll also find rack extrusions for building your own double door or combo flight case, or your own 19-inch rack. If you're building your own flight case, you'll also need ball corners and flat corners.
The Adam Hall Hardware 6144M is an aluminium lid location for 9.6 mm material. This 1m-long profile with 1.5mm material thickness is ideal for robust lid constructions.
This aluminium lid placement male for 10 mm material is ideal for fixing lids in robust applications. With a length of 1 metre, the profile offers a stable and reliable solution.
The Adam Hall 6123F aluminium member location is perfect for creating a sturdy and reliable connection when constructing crates. The 1 metre profile is suitable for 9.5 mm material.
This 1-metre aluminium casemaker is ideal for lightweight, robust designs. It has a thickness of 1.5 mm and offers versatile applications thanks to an input thickness of 9.5 mm and input height of 17 mm.
The Adam Hall Hardware 6206F is an aluminium lid placement designed specifically for 10 mm material. With a length of 1 metre, this lid placement offers a reliable solution for robust applications.
This aluminium channel is suitable for mounting 7 mm thick wall partitions. With a length of 1 metre and a material thickness of 1.5 mm, it offers a sturdy and reliable partitioning solution.
This rack strip is fashioned from 2.00mm steel and has a height of 20 U. Because it has mounting holes at 15mm intervals, you are free to mount any equipment you like.
This aluminium channel is ideal for partition walls with a thickness of 9.5 mm. With a length of 1 metre, it provides sturdy support for mounting wall sections, suitable for various applications.
The rack strip is made of 2.0 mm thick steel and has a height of 18 U. The holes have an interval of 15 mm so you are free to mount any device possible to this rack profile.
The rack is made of 2.0mm steel and is 10 U high. As there is a hole every 15 mm, you can mount whatever device you want with this rack.
This rack strip is fitted with 9.5mm punched holes and has 5mm mounting holes for attachment to a flight case. This rack strip is made of 2.0mm steel and has a height of 3 U.
If you're busy building a custom flight case, then you can't do without closure profiles to finish off the edges and prepare it for a lid. This Penn Elcom profile is made of aluminium and is compatible with 9.5mm-thick panels.
The Adam Hall 6124 aluminium lid maker is ideal for making lid profiles with an input thickness of 7 mm. The profile is 1 metre long and includes a slot for overlatches, making it waterproof when a rubber
This angle extrusion protects your flight case against bumps during transport.
This 1-metre aluminium case corner has a lay length of 35 mm and a material thickness of 2 mm, ideal for robust and stable constructions. It is perfect for building sturdy frames and cases.
The Adam Hall 6123M aluminium member location is perfect for fixing lid profiles in crates. With a length of 1 metre and an insertion thickness of 9.5 mm, it offers a sturdy and reliable connection.
The Penn Elcom 6060 is a 1.7 metre-long aluminium rack extrusion with a sliding system.
Add several of these aluminium protective corners to your flight case to keep it held together nicely and protected against bumps during transport.
This 1-metre aluminium casemaker is ideal for lightweight, robust designs. It has a thickness of 1.5 mm and offers versatile applications thanks to an input thickness of 7 mm and input height of 20 mm.
The Penn Elcom E2215 U-shape extrusion is made of aluminium and is compatible with 9mm (3/8") thick boards, making it the ideal finishing touch for any self-built DJ furniture.
This Penn Elcom double rack profile is 12U high and comes pre-drilled with holes at 15mm intervals for eased installation.
This 1.7-metre-long rack profile is made of 3mm aluminium and features pre-drilled holes with a 9.5mm diameter.
The rack is made of 2.0mm steel and is 16 U high. As there is a hole every 15 mm, you can mount whatever device you want with this rack.
If you are building a flight case for your valuable equipment, this edge extrusion is a great finishing touch. It is suited for plates with a thickness of 6.8 mm.
Give your DIY flightcase the finishing touch with this aluminium extrusion. The Penn Elcom 0522 is ideal for DIY flightcases.
Are you building a flight case for your equipment? This aluminium angle extrusion makes the perfect final touch. The separate flight case elements stick together, and the angle extrusion protects your flight case against bumps while transporting it.
The 6108 sliding profile is easy to install in a flight case and serves to support a rack shelf or keyboard drawer. Made by Penn Elcom, so high-quality is guaranteed!
This aluminium extrusion puts the clean finishing touch on any self-built flight case. The Penn Elcom 0522 is 10.2mm thick and has been grooved along the entire 1.7-metre length.
The Penn Elcom 6020 aluminium rack profile is designed to complete a cage-nut based sliding system. This profile is 100cm long, 25mm wide, and 25mm deep.
Sturdy 90 U aluminium 19" rack strip with continuous design for smooth sliding mounting in racks.
This rack strip features 9.5mm diameter punched holes at 15mm intervals. It can easily be attached to a flight case by means of its 5mm mounting holes. This rack strip is fashioned from 2.00mm steel and has a height of 2 U.
Are you building a flight case for your valuable equipment? With this aluminium angle extrusion you will be able to finish it off nicely! Keep your flight case secure and protected turning transport.
This rack strip is equipped with 9.5mm punched holes and 5mm mounting holes. The strip is made of 2.0 mm steel and is 6 U high.
The Adam Hall 6119 1-metre aluminium casemaker is ideal for lightweight and robust cabinet designs. With a 10 mm input thickness and 16 mm input depth, this profile offers versatility for a variety of applications.
Putting together your own flight case? The Penn Elcom 0153 double angle extrusion will help protect it against knocks and bumps. It's 6.8mm thick and compatible with wooden panels.
This aluminium capping channel is suitable for partitions of 9.5 mm thick material. With a length of 1 metre, it offers a strong and durable solution for finishing walls.
This rack strip is equipped with punched holes with a diameter of 9.5 mm each. The holes that are used for the mounting of the strip to the flight case have a diameter of 5 mm each. The rack strip is made of 2.0mm steel and is 4 U.
This rack strip is fashioned from 2.0mm steel and has a height of 12 U.
This single angle extrusion by Penn Elcom is made of aluminium and has a length of 1.70 m.
The Adam Hall 6130 1-metre aluminium "h" section is ideal for joining 9.5mm panels. It offers a sturdy and stable solution with a material thickness of 1.5 mm for various applications.
Working on a custom flight case? Don't forget to finish the base with this Penn Elcom NC2DAE double-angle extrusion for maximum durability.
This aluminium cover profile is suitable for 10 mm material and has a 5 mm radius. With a length of 1 metre, it offers a perfect finish for cases and racks without covers.
With this angle extrusion, your flight case will stay in one piece and is protected against bumps during transport. It is fit for wooden plates with a gauge of 10 mm.
The Adam Hall 6127 aluminium h-profile is ideal for connecting large panels. With an input thickness of 10 mm, this 1 metre-long profile offers a strong and stable connection.
Robust aluminium rack strip with rubber insert, ideal for side mounting shelf support in 19" racks without double rear strip.
This aluminium case corner has a length of 1 metre and is perfect for creating solid corners in aluminium frames. It is made of raw aluminium with a material thickness of 1.5 mm.
The Adam Hall Hardware 6144F is an aluminium member location for 9.6 mm material. This profile is 1 metre long, has a material thickness of 1.5 mm and is suitable for various applications in the construction of cabinets and enclosure
The Adam Hall Hardware 6200BLK is a 1-metre black aluminium capping channel, ideal for finishing 7 mm partitions. The anodised surface provides extra protection.
