Top 10 best-selling Flight Case Extrusions

Are you building a flight case for your equipment? This aluminium angle extrusion makes the perfect final touch. The separate flight case elements stick together, and the angle extrusion protects your flight case against bumps while transporting it.

This angle extrusion protects your flight case against bumps during transport.

Are you building a flight case for your valuable equipment? With this aluminium angle extrusion you will be able to finish it off nicely! Keep your flight case secure and protected turning transport.

This aluminium extrusion puts the clean finishing touch on any self-built flight case. The Penn Elcom 0522 is 10.2mm thick and has been grooved along the entire 1.7-metre length.

If you're busy building a custom flight case, then you can't do without closure profiles to finish off the edges and prepare it for a lid. This Penn Elcom profile is made of aluminium and is compatible with 9.5mm-thick panels.

The Penn Elcom 0491 Slam-Lid profile has a 10mm interior depth and is fully compatible with the EG-0100 angled extrusion, both in terms of finish and grooves.

This rack strip is fashioned from 2.00mm steel and has a height of 20 U. Because it has mounting holes at 15mm intervals, you are free to mount any equipment you like.

The rack strip is made of 2.0 mm thick steel and has a height of 18 U. The holes have an interval of 15 mm so you are free to mount any device possible to this rack profile.

With this angle extrusion, your flight case will stay in one piece and is protected against bumps during transport. It is fit for wooden plates with a gauge of 10 mm.

Add several of these aluminium protective corners to your flight case to keep it held together nicely and protected against bumps during transport.