Here, you can choose from our wide range of handles that will allow you to easily pick up and transport your custom-built flight case. We carry handles made of either plastic, leather or metal in a variety of different types. We stock recessed handles for double door and combo flight cases, but also pull-out handles for MIDI controller flight cases and light effects flight cases, for instance.
Penn Elcom build-in recessed handle with double spring. It is made of 1.5 mm thick steel and has a zinc colour.
This spring-loaded handle is the perfect finisher for any self-constructed flight case. The Penn Elcom H4051Z is easy to install thanks to pre-drilled mounting holes and has been made of 1.2mm thick steel.
The Penn Elcom H1076 is an easy-to-fit handle that allows you to add a handle to a flight case or cabinet. The handle needs four screws and fits into a round hole with a diameter of 16.5 cm.
Synthetic pocket handle for speaker cabinets. Has a 102 x 59mm cutout and is equipped with four pre-drilled holes with a diameter of 4.5 mm each.
This recessed bar handle is made of 0.9 mm thick steel and has a black colour. Easy to build into one of your speaker cabinets. It is 63 mm deep and equipped with twelve pre-drilled holes with a diameter of 5.5 mm each.
The Penn Elcom H1078z flight case handle is easily installed via the pre-drilled holes and comes finished with a comfy rubber grip and a spring-loaded mechanism to keep it neatly tucked in after use.
Don't forget this backplate from Penn Elcom when installing a built-in handle from the H7150Z series in your flight case. A sturdy steel plate with a zinc-coloured finish and equipped with ten mounting holes.
This strap handle is made of rubber and steel. It can be mounted easily to your flightcase!
Made of rubber, this Penn Elcom strap handle is a solid finishing touch for any self-built flight case.
This Penn Elcom strap handle is perfect for a DIY flight case and features a black, plastic strip with metal fixings.
Finish a flight case in deluxe style with the Penn Elcom H1008 leather-look handle. This strap-style handle is easy to install thanks to the metal fittings and is also more comfortable than any straight-up metal handle.
This leather handle can be used for the flightcase you use to store tools or cables, for example. The handle is equipped with four pre-drilled holes with a diameter of 5.5 mm.
Easy to build into one of your speaker enclosures. It has a depth of 63 mm and comes with 10 pre-drilled holes.
This is a black-finished, spring-loaded mountable handle from Penn Elcom. It's made of quality steel and features six mounting pre-drilled holes for easy installation.
Mount this Penn Elcom handle onto any flight case along with a set of wheels and turn it into an easy-to-shift trolley.
Penn Elcom's H1430 is a reliable black flight case handle with nickel fittings. The handle is 15.6 cm long and 6.3 cm in height.
The Penn Elcom H1078k flight case handle is easily installed via the pre-drilled holes and comes finished with a comfy rubber grip and a spring-loaded mechanism to keep it neatly tucked in after use.
Designed for finishing off a DIY rack or flight case, the Penn Elcom H1050z handle features a dual spring-loaded mechanism and a recessed design to complete a neat job.
This briefcase handle has two pre-drilled holes so you can mount it to your toolbox, cable box or spare part case.
Compact handle, with spring and comfortable rubber handle. Ideal for cases, as well as compact flightcases. Easy to mount as it does not have to be flush-mounted.
Load heavier gear in and out with smooth ease by equipping your flight case with this Penn Elcom designed retractable trolley handle with wheels.
Create a solid handle for your flight case by mounting this one on. This swivel handle is equipped with M4 mounting points.
Designed to ensure the solid and secure installation of medium-sized flight case handles like the Penn Elcom H7151 or H7159, this backplate is made from 0.9mm-thick steel and comes in black.
Sturdy black plastic handle for cases and cases, equipped with metal mounting frame for extra durability and easy mounting.
A neat finishing touch for a DIY flight case, the Penn Elcom H1025 corner handle has a recessed design to maximise efficiency and comfort while saving space.
The leather-look of this Penn Elcom designed handle adds a deluxe touch to any custom flight case. The handle is easy to install thanks to nickel-finished mounting plates.
This recessed case handle from Penn Elcom has a sturdy, steel hand grip covered with rubber. Since it's double sprung, it'll dutifully revert back to its original position, no matter how times you lift up your case.
The Penn Elcom H1013 is a black strap handle that can be mounted on your DIY flight case. It's made of a plastic strip with metal ends that can be covered using the included plastic caps.
It is obvious that you want the right protection for your valuable equipment. Are you building a flight case? With this handle you will not only have protection for your flight case, but efficiency and ease of use as well!
You obviously want the right protection for your valuable equipment. Are you building a flight case? This surface handle does not only protect, it also increases the efficiency and ease-of-use of the case.
This recessed handle with rubber grip is made of 1.5 mm thick steel. It springs back and has a black coating.
This handle can be used for your flight case, toolbox or cable box, for instance. It's equipped with two pre-drilled holes and is made of PVC and steel.
This rivet-protected recessed handle is comfortable to use, thanks to the thick rubber handle that is attached to it.
Designed for rugged use, this sturdy spring handle from Adam Hall offers extra protection thanks to rivet protection. The handle is made of black PVC with a silver steel saucer.
Stylish Penn Elcom H1428 briefcase handle with a swivelling plastic grip and chrome-plated metal fittings, ideal for suitcases, presentation cases and lightweight flight cases.
This handle is a compatible spare or replacement for the Devine B115 MKII, B115A MKII, B118 MKII and B118 MKII speakers.
Need a simple steel handle to polish off a custom flight case? Then this piece of Penn Elcom hardware is just what you're looking for.
Strengthen and reinforce a Penn Elcom H1050 or H7159 flight case handle with this compatible baseplate.
This heavy-duty plastic handle is a compatible replacement for the broken original handle of the Devine Artis 12 mkII, 15 mkII, 12A mkII and 15A mkII speaker.
Just in case, this replacement handle is compatible with Devine Artis Series speakers, so the Artis 10, 10A, 12, 12A, 15 and 15A speakers.
The Devine 10270 replacement side handle is compatible with the Devine Artis 8A, 10A and 10 speakers.
This heavy-duty plastic handle is a compatible replacement for the broken original handle of the Devine Artis 8 A mkII, 10A mkII mkII and 10A mkII speaker.
This Adam Hall 34082A recess spring handle is made of aluminium and has a depth of 8 mm. It provides a sturdy and reliable solution for mounting handles.
Recessed sprung handle in a zinc-plated steel dish with a black PVC grip. A robust, durable solution for heavy-duty applications, perfect for cases, enclosures, or other professional setups.
The Adam Hall 34041BLK is a black, powder-coated handle for attaching to the edges of heavy flight cases or removable lids. Suitable for an aluminium edge of up to 35 mm.
This sturdy folding handle from Adam Hall is designed for use in a variety of applications. Featuring a stainless steel mounting plate and a comfortable PVC handle in black.
