Here, you can choose from our wide range of handles that will allow you to easily pick up and transport your custom-built flight case. We carry handles made of either plastic, leather or metal in a variety of different types. We stock recessed handles for double door and combo flight cases, but also pull-out handles for MIDI controller flight cases and light effects flight cases, for instance.
The Adam Hall 3414BRN is a strap handle made of brown faux leather, fitted with a steel insert and including fasteners for easy mounting.
It is obvious that you want the right protection for your valuable equipment. Are you building a flight case? With this handle you will not only have protection for your flight case, but efficiency and ease of use as well!
You obviously want the right protection for your valuable equipment. Are you building a flight case? This surface handle does not only protect, it also increases the efficiency and ease-of-use of the case.
This recessed case handle from Penn Elcom has a sturdy, steel hand grip covered with rubber. Since it's double sprung, it'll dutifully revert back to its original position, no matter how times you lift up your case.
This is a black-finished, spring-loaded mountable handle from Penn Elcom. It's made of quality steel and features six mounting pre-drilled holes for easy installation.
Finish a flight case in deluxe style with the Penn Elcom H1008 leather-look handle. This strap-style handle is easy to install thanks to the metal fittings and is also more comfortable than any straight-up metal handle.
This handle is intended as an extra or spare part for Devine Trono series speakers. Specifically for the Trono 10, 12 and 15.
Synthetic pocket handle for speaker cabinets. Has a 102 x 59mm cutout and is equipped with four pre-drilled holes with a diameter of 4.5 mm each.
The Penn Elcom H1078k flight case handle is easily installed via the pre-drilled holes and comes finished with a comfy rubber grip and a spring-loaded mechanism to keep it neatly tucked in after use.
The Penn Elcom H1078z flight case handle is easily installed via the pre-drilled holes and comes finished with a comfy rubber grip and a spring-loaded mechanism to keep it neatly tucked in after use.
The Penn Elcom H1076 is an easy-to-fit handle that allows you to add a handle to a flight case or cabinet. The handle needs four screws and fits into a round hole with a diameter of 16.5 cm.
Compact handle, with spring and comfortable rubber handle. Ideal for cases, as well as compact flightcases. Easy to mount as it does not have to be flush-mounted.
Easy to build into one of your speaker enclosures. It has a depth of 63 mm and comes with 10 pre-drilled holes.
This recessed bar handle is made of 0.9 mm thick steel and has a black colour. Easy to build into one of your speaker cabinets. It is 63 mm deep and equipped with twelve pre-drilled holes with a diameter of 5.5 mm each.
Don't forget this backplate from Penn Elcom when installing a built-in handle from the H7150Z series in your flight case. A sturdy steel plate with a zinc-coloured finish and equipped with ten mounting holes.
This briefcase handle has two pre-drilled holes so you can mount it to your toolbox, cable box or spare part case.
This ultra-rugged black bar handle is made of ABS. Build this bar handle into your speaker cabinet for easy transport. This handle has a depth of 58.8 mm and is fitted with 8 mounting holes.
This strap handle is made of rubber and steel. It can be mounted easily to your flightcase!
This leather handle can be used for the flightcase you use to store tools or cables, for example. The handle is equipped with four pre-drilled holes with a diameter of 5.5 mm.
The Penn Elcom H1013 is a black strap handle that can be mounted on your DIY flight case. It's made of a plastic strip with metal ends that can be covered using the included plastic caps.
Penn Elcom's H1430 is a reliable black flight case handle with nickel fittings. The handle is 15.6 cm long and 6.3 cm in height.
Made of rubber, this Penn Elcom strap handle is a solid finishing touch for any self-built flight case.
Designed for finishing off a DIY rack or flight case, the Penn Elcom H1050z handle features a dual spring-loaded mechanism and a recessed design to complete a neat job.
The leather-look of this Penn Elcom designed handle adds a deluxe touch to any custom flight case. The handle is easy to install thanks to nickel-finished mounting plates.
Mount this Penn Elcom handle onto any flight case along with a set of wheels and turn it into an easy-to-shift trolley.
This handle makes lifting the heaviest cases easy. The back plate of the handle is flush-mounted so that it cannot damage anything.
This recessed handle with rubber grip is made of 1.5 mm thick steel. It springs back and has a black coating.
Designed to ensure the solid and secure installation of medium-sized flight case handles like the Penn Elcom H7151 or H7159, this backplate is made from 0.9mm-thick steel and comes in black.
Load heavier gear in and out with smooth ease by equipping your flight case with this Penn Elcom designed retractable trolley handle with wheels.
This handle can be used for your flight case, toolbox or cable box, for instance. It's equipped with two pre-drilled holes and is made of PVC and steel.
This rivet-protected recessed handle is comfortable to use, thanks to the thick rubber handle that is attached to it.
Penn Elcom build-in recessed handle with double spring. It is made of 1.5 mm thick steel and has a zinc colour.
This non-spring-loaded flight case handle is easy to secure to your case and comes with a rubber grip for a little extra comfort.
This handle is a compatible spare or replacement for the Devine B115 MKII, B115A MKII, B118 MKII and B118 MKII speakers.
This heavy-duty plastic handle is a compatible replacement for the broken original handle of the Devine Artis 12 mkII, 15 mkII, 12A mkII and 15A mkII speaker.
Strengthen and reinforce a Penn Elcom H1050 or H7159 flight case handle with this compatible baseplate.
Need a simple steel handle to polish off a custom flight case? Then this piece of Penn Elcom hardware is just what you're looking for.
The Penn Elcom H7150/85 backplate is made for mounting and reinforcing a Penn Elcom H7150Z flight case handle.
For extra sturdiness of your built-in handle in your self-built flight case, it is best to also mount a backplate. This one from Penn Elcom belongs to a handle from the H7150 series, also from Penn Elcom.
The Devine 10270 replacement side handle is compatible with the Devine Artis 8A, 10A and 10 speakers.
This heavy-duty plastic handle is a compatible replacement for the broken original handle of the Devine Artis 8 A mkII, 10A mkII mkII and 10A mkII speaker.
Just in case, this replacement handle is compatible with Devine Artis Series speakers, so the Artis 10, 10A, 12, 12A, 15 and 15A speakers.
The Adam Hall 3411P is a small, recessed plastic handle, ideal for 2U 19" cases and other applications where a simple, compact handle is needed.
The Adam Hall 34097 is a sturdy backing ring compatible with the 34081 and 34083 recessed sprung handles. Made of galvanised steel for long-lasting use.
Steel handle, galvanised, with a height of 45 mm and a width of 150 mm. Ideal for 2U 19" cases or other applications where a small and simple handle is needed.
The Adam Hall 34095 is a backplate for the recessed spring handle 34085, made of galvanised steel. This plate offers extra strength and provides a neat finish to your handle.
Sturdy black plastic handle for cases and cases, equipped with metal mounting frame for extra durability and easy mounting.
