This durable, 2mm thick steel rack rail comes pre-drilled with 3 holes per unit offering masses of freedom in terms of configuration. This rail is a DIY rack or flight case customising essential.
An indispensable component to build your 19-inch rack or install in a flight case. Made of 2 mm thick steel, this durable rail features 3 holes per unit, giving you greater freedom in how you attach it.
This Heavy-Duty Rack Strip is an indispensable part of your DIY flight case or 19" rack. This durable rail is made of 2 mm thick steel and features 3 pre-drilled holes per unit for multiple installation options.
Remember that to install a set of heavy-duty rack rails, you need the correct nuts. These Adam Hall cage nuts with M6 thread for 2 mm are made of steel for maximum durability.
Almost all devices require proper ventilation and heat dissipation to maintain flawless operation. This 1U ventilation plate for your 19" rack features a perforated design to provide ample airflow.
Finished with lots of tiny holes, the Adam Hall 87223VR ventilation panel helps keep your rack equipment nice-and-cool. This 3U-sized panel is made from steel and features a durable powder-coating.
This Adam Hall-compiled set of rackware includes four M6 crosshead screws, four washers and four nuts that can be used to mount various bits of rack kit.
The Adam Hall 87402P1 Rack Drawer Divider can be used to organise small rack gear. This version is needed for the width, while the P2 version (not included) is needed to divided your 19" rack drawer lengthwise.
Need something to house somewhat larger gear? This steel rack drawer from Adam Hall offers 4U of room and features a built-in cylinder lock.
Made of steel, this 2U rack panel from Adam Hall allows you to mount twenty-four XLR ports and keep dust and dirt away from your gear at the same time.
Manufactured by Adam Hall, this heavy-duty double rack-strip has a 45U length, features two mounting holes per unit and comes made out of durable, powder-coated steel.
Made by Adam Hall, this steel rack mount housing has a 2U height and ventilated top panel to ensure proper airflow.
Protect rack gear, make sure no one touches the settings and keep the controls in plain sight with this transparent plexiglass front panel. This 2U high panel is compatible with any standard 19 inch rack or flight case.
This 19-inch rack panel not only shields your gear, but helps keep it cool by allowing for airflow via the honeycomb-style mesh front.
This 19-inch rack tray supports non-standard gear with a depth of up to 375mm, features vented sides and comes with an upright rear edge for extra stability.
These little rubber feett from Adam Hall are a highly protective accessory that keeps your flight case, furniture or floor free from damage.
Polish off your 19-inch rack or flight case the professional way with this 1U aluminium blind plate from Adam Hall. This completely flat front plate keeps out dust and dirt, keeping your gear in optimum working condition.
Finish your 19" rack or flight case in a professional manner by covering any open slots with this Adam Hall flat rack panel to better protect your equipment against dust, dirt and moisture. This is the 1U, steel version.
This vented front plate from Adam Hall comes with circular cut-outs to keep the gear inside your 19-inch rack or flight case cool. It's 2U high and made of steel.
Always handy: this pull-out shelf from Adam Hall provides a 38cm deep and 1U high storage space for stashing gear and accessories and keeping them within easy reach.
Mount the Adam Hall 8756 rack tray in your open-top rack and gain 2U worth of room for gear like mixers and effects. Smaller bits of kit can be tied down with the included hook-and-loop fastening strip.
Since it has pre-drilled holes, this Adam Hall 8754 19" rack inlay is not only easy to install but supports various small bits of rack or flight case gear with non-standard dimensions.
This 19-inch rack tray supports non-standard gear with a depth of up to 375mm, features vented sides for airflow, and comes with an upright rear edge for extra stability.
This set of rack hardware accessories lets you get instantly started on building your own 19" rack. Included are M6 screws, protective rings and cage nuts.
These small yet durable rubber feett can be easily installed on a flight case or other gear to add an extra level of protection and stability.
The Adam Hall 4909 M8 AH pack includes eight stabilising rubber feet that each measure 38 by 22 millimetres and have a 6.5mm diameter mounting hole.
The Adam Hall 4911 M4 AH pack includes four rubber feet that are 25mm high and measure 38mm in diameter.
The Gravity BG CART M1 is a robust wagon bag for the Gravity CART M 01 B, made of water-repellent 1680D nylon. The bag is customisable and offers excellent protection for smaller equipment.
This Adam Hall 5417BLK Cross-head screw (M6 x 12 mm) is a robust, black zinc-plated screw with a Phillips (Pozidriv) head, ideal for mounting racks and cases.
This black plastic ring (without rim) is ideal for use in fastening systems. Perfect for protecting surfaces and evenly distributing force during fastening.
The Adam Hall 5621 is a black plastic flat washer with no rim. Suitable for various applications, with an outer diameter of 12 mm and an inner diameter of 6.4 mm.
The Adam Hall 5650 Cage Nut is designed for use with a 3.5mm aluminium back rail. This stainless steel mounting accessory is ideal for mounting M6 screws.
The Adam Hall 5660 is an M6 square nut suitable for 6161 aluminium back rails. Made of galvanised steel for long-lasting performance in rack mounts.
This fixing ring is ideal for use with padlocks or seals. Made of sturdy, galvanised steel and suitable for a variety of applications.
The Adam Hall Hardware 1905 is a sturdy, medium-sized locking surface-mounted chrome lock designed for extra security for cases and cabinets. Includes key for locking.
The Adam Hall Hardware 1907 is a small locking surface-mounted lock made of chrome-plated steel, ideal for securing smaller cases and cabinets. Includes key for extra security.
Lockable M6 x 25 mm galvanised steel screw, ideal for mounting enclosures, rack rails, doors, etc.
These galvanised M6 x 45 mm flat-head, square-neck (DIN 603) screws are ideal for mounting enclosures, rack rails, doors and roller boards.
Sturdy 1-metre aluminium lid profile, suitable for 13 mm plate material. Ideal for firm and precise closure of flight cases and case constructions.
Sturdy 1-metre aluminium lid profile, suitable for 9.5 mm sheet material. Ideal for closing flight cases and cases with a precise fit.
Strong and durable aluminium membermaker profile for 7 mm materials. Ideal for making waterproof lids in combination with rubber seals.
25 x 15 mm rubber base for equipment, ideal for providing grip and protection. Suitable for use on various types of equipment.
This 1-metre aluminium casemaker is ideal for lightweight, robust designs. It has a thickness of 1.5 mm and offers versatile applications thanks to an input thickness of 7 mm and input height of 20 mm.
The Adam Hall 4906 rubber foot is a practical solution for protecting equipment or furniture. This 38 mm round foot offers firm grip and features a PP core.
Solid black chipboard screw from Adam Hall with flat head and Pozidriv drive, ideal for sturdy fixings.
Filters