Tighten up any PA system with this set of Gravity SA CC 35 B cables clips. Simply clip them onto the speaker stands and route any power and speaker cables through to neaten up the venue floor.
The Gravity SP 4722 B speaker stand features a solid wind-up mechanism, allowing you to set up your speakers at the optimal height.
The Gravity XSP 1009 clutch handle is a replacement part for Gravity-made microphone stands.
The Gravity XSP 1062 Counter Nut can be used to re-fit a Gravity microphone stand with a 3/8 inch screw threaded mounting point and is made from aluminium.
The Gravity BG SS 1 XLB speaker stand bag comes padded with 10mm-thick foam rubber on all sides and offers room for a single tripod-style stand.
If you hang your beloved guitar on the Gravity GS 01 WMB, you can rest assured that it won't come loose unless you want it to. This wall mount is equipped with a special Neck Hug system that automatically locks in around the neck of your guitar.
The Gravity XSP 1022 safety pin plus harness is compatible with Gravity speaker stands only.
Accurately position a microphone or lamp in seconds with the qualified help of the flexible Gravity MA GOOSE S goosneck. This neat and professional gooseneck is 140mm long and fitted with a 3/8 inch screw thread.
The Gravity XSP 1007 is a cable clamp with 15mm diameter. Attach it to your boom arm via the simple clip-on system to expand your cable management possibilities!
The Gravity MS 4322 B is a microphone stand with a matt black powder coating. It's constructed from thick-walled tubes and equipped with three legs and a galvanised base for optimal stability.
Never be hindered by a wonky music stand again! The ultra-stable Gravity NS ORC 1 music stand features a fold-out tripod base and solid aluminium music rest.
The Gravity MS CLMP 25 microphone clip features a built-in hinge so you can easily tilt your microphone into the right position. It's equipped with a 5/8" screw thread and can be screwed onto almost any stand thanks to the included 3/8" adapter.
The Gravity NS 441 B music stand has a strong-and-stable tripod design and comes complete with a gig bag. Both the tripod base and music rest of this steel stand can be folded up for eased transport.
The Gravity XSP 1016S Replacement Clamp Set is compatible with various Gravity-designed speaker stands and includes the clamps needed to adjust the height of your stand.
The Gravity NS 411 music stand is practical and sturdy, featuring a lightweight, perforated music rest and a tripod-style base that can be set to a height between 66cm and 120cm.
The Gravity MSTM1B conveniently clamps to the edge of a desk, table, or stage, via a simple screw-on-system, and comes fitted with a standard 3/8" threaded screw that can take any compatible microphone or gooseneck.
The Gravity RP 5555 is a universal ring pack for all Gravity customisable products. Each set contains 20 rings in 4 different sizes (15 mm, 20 mm, 25 mm, 30 mm). This is the red variant.
With the Gravity XSP 1039, you have a spare part for Gravity microphone stands with a round base. This nut covers the attachment point between the stand's tube and the round base.
The Gravity XSP 1025 is a round, rubber insert that serves as a spare part of Gravity microphone stands with a round base.
For the best possible sound spreading, you need the Gravity SP WMBS 20: a sturdy steel, universal wall mount that can be tilted and swivelled as needed and takes speakers weighing up to a maximum of 20 kg.
The Gravity XSP 1031 Replacement Tensioning Screw is needed to mount the height adjustment lever of your Gravity MS 4321 microphone stand. Also compatible with similar Gravity mic stands.
The Gravity XSP 1012 is a rod arm swivel head spare part. Combined with the XSP 1014S rod arm hub, the XSP 1012 allows you to mount a rod arm on a Gravity microphone stand.
With the Gravity XSP 1359, you have a rubber foot that fits the tripod leg of a Gravity guitar stand, such as the GS 01 NHB. This rubber foot serves as a spare part and comes with a ring.
The innovative Gravity SP 3102 TM Monitor Stand securely clamps onto the edge of the desk, clearing your workspace and completing a modern audio production setup.
The Gravity MA GOOSE XL is the longest gooseneck from the series and measures 600mm. This incredibly flexible accessory comes fitted with a 3/8" screw thread.
Designed to survive a gruelling touring schedule, the Gravity TMS 4321 B microphone stand is insanely durable and packs down into a tight and manageable package.
Getting a microphone stand from A to B is easy as ABC with the Gravity BG MS 1 B. This microphone stand bag is made of flexible neoprene and features a water-repellent, dust-proof exterior.
Need a side tray for your capo, percussion instruments or accessories? The Gravity MA TRAY 2 can be secured to most microphone stands with ease and offers a 40 by 13-centimetre platform.
The Gravity XSP 1008 is a handy clip-on cable clamp for 20mm-tube microphone stands. Expand your cable management options and professionalise your set-up!
The Gravity XSP 1367 is a set screw with plastic knob and green coloured ring that allows you to attach the base to a Gravity speaker stand. This is a spare part for the Gravity SP 4722.
The universal Gravity MA DRINK drink holder has been fitted with a screw clamp so it can be secured to any stand with a maximum 35mm diameter. This is the medium-sized edition.
Providing space for two speaker stands, the Gravity BG SS 2 LB bag is made from high-quality 600D water-resistant nylon, comes fitted with a durable dual-zip and secure wraparound handles.
The Gravity Guitar Glow Stand isn't just any guitar stand, but features built-in RGB LEDs that can be dimmed, basically making it a unique guitar display system.
The Gravity NS ORC 1L is a taller than average music stand able to tower up to 1.5 metres high. This stable aluminium stand has been fitted with a solid music rest.
Featuring thick tubes, an extra-heavy base and a black powder-coated finish, the Gravity MS 4322 HDB microphone stand fully supports energetic, intense and passionate performances.
Fit to take Gravity-designed lecterns and music rests, the Gravity BG NS 1 B gig bag is made of strong, water-repellent nylon and features accessory compartments for score and other bits.
An ever-useful microphone stand add-on, the Gravity MA TRAY 1 sets you up with a platform for small accessories, like a capo, tablet, picks, maracas, drum keys, etc.
The Gravity LS FLOORX B floor stand is designed for light effects like spotlights. This compact steel stand can be folded in for transport and features durable rubber feet that keep it from shifting as well as marring the floor.
The Gravity GMAVARIARMM38 is a versatile swing arm for easy and quick positioning of equipment. Ideal for microphones, cameras and more, it features sturdy steel construction and central locking.
The Gravity XSP 10015 replacement feet are compatible with the Gravity WB 431 baseplate. This is a set of 4.
The Gravity HP HMS 01 B headphone holder can be secured to a standard microphone stand and holds up to two pairs of headphones or in-ears.
This headphone holder from Gravity has a simple yet effective design. It's made from aluminium and even features slits for clean cable management.
The Gravity GMATRAY3 tiltable traveller tray is an ergonomic design for travelling. It can be easily clamped onto tripods and is tiltable up to 180°. Ideal for placing small items such as your smartphone or
The Gravity XSP 1027 Replacement Lever will fit all compatible Gravity keyboard stands so the height can be adjusted with ease.
Lost the thread adapter that came with your Gravity MS QT 1 B Quick-Tilt Microphone Adapter? The Gravity XSP 1066 3/8-inch to 1/4-inch screw thread adapter sets you up with a new one.
The Gravity XSP 1030 is an M6x15 set screw, complete with ABS/TPE knob fitted with coloured ring. This is a spare part for Gravity guitar stands.
The Gravity RP 5555 is a universal ring pack for all Gravity customisable products. Each set contains 20 rings in 4 different sizes (15 mm, 20 mm, 25 mm, 30 mm). This is the pink variant.
Made from steel and stabilised by a heavy cast iron base, the Gravity MS 2321 boom microphone stand has a solid and flexible design. Adjust the height and angle via the ergonomic screw knobs for the ideal setup.
