The Gravity XSP 1038 is a spare part for Gravity microphone stands with a round base. This base has a diameter of 27 centimetres and a weight of 3.6 kilograms.
The Gravity XSP 1042 is a set of rubber washers that serve as a spare part for Gravity microphone stands with a 1-point rod arm system.
The Gravity XSP 1043 is a set of rubber washers that serve as a spare part for Gravity microphone stands with a 2-point rod arm system.
The Gravity XSP 1045 base plate end cap is a spare part for Gravity monitor stands.
The Gravity XSP 1046 is a threaded adapter that serves as a spare part for Gravity monitor stands.
The Gravity XSP 1047 is a screw set consisting of 4 screws that you use to secure the top plate of the Gravity SP 3202 studio monitor stand, among others. This is a spare part.
The Gravity XSP 1048 S upper clamp set is a spare part for Gravity speaker stands. This set comes with a set screw that features a green coloured ring.
The Gravity XSP 1049 is a set of two supports including screws. This is a set of spare parts for Gravity tripod speaker stands.
The Gravity XSP 1050 speaker stand base refers to a spare part for Gravity tripod speaker stands, such as the Gravity SP 5522 B.
The Gravity XSP 1051 is a cap set for the lower end of the main tube of a Gravity speaker stand, including screws and nuts for the tripod tubes. This is a spare part.
The Gravity XSP 1052 is a set consisting of two plastic plugs suitable for the guitar mounts on Gravity guitar stands, such as the Gravity Solo-G. This is a spare part for these stands.
The Gravity XSP 1053 is a spare part for Gravity guitar stands, such as the Gravity Solo-G. This is a rubber cap with pin, suitable for the main hinge on the guitar stand.
The Gravity XSP 1054 is a set of two protective, foam sleeves that allow you to protect the supports for a Gravity VARI-G guitar rack from bumps and scratches. This is a set of spare parts.
With the Gravity XSP 1055, you are provided with a set of spare parts suitable for Gravity VARI-G guitar racks. This is a set of long, protective foam sleeves for the brackets.
The Gravity XSP 1056 refers to a set of screws that you can use to assemble a Gravity VARI-G guitar rack. This is a set of spare parts consisting of screws and washers.
The Gravity XSP 1061 is a set of optional spikes that you can attach to the underside of a Gravity monitor stand, such as the Gravity SP 3202. This prevents the tripod from sliding on slippery surfaces.
The Gravity XSP 1201 is a screw set that serves as a spare part of a Gravity NS ORC music stand. With this kit, you attach the blade mounting plates to the tripod.
The Gravity XSP 1358 is a set of two protective tubes for Gravity guitar stands, especially the GS 01 and similar models. You attach these tubes to the legs on which the guitar leans.
From the Gravity GS 01 NHB, this XSP-1360 spare part concerns the guitar clamp for the guitar stand.
The Gravity XSP 1362 is a spare part for the wind-up Gravity speaker stand. It is the 35 mm adapter sleeve on which you mount the speaker.
Use the Gravity XSP 1363 to replace a lost or worn rubber base on your Gravity speaker stand, such as the Gravity SP 4722. This is a rubber base including a green coloured ring.
The Gravity XSP 1364 is a set of two bracket rods including screws. This set serves as a spare part for Gravity tripod speaker stands such as the SP 4722.
The Gravity XSP 1365 is a set consisting of three screws, nuts and washers for mounting the Gravity speaker stand base. This is a spare part for the Gravity SP 4722, among others.
The Gravity XSP 1366 speaker stand base is a spare part for Gravity tripod speaker stands, such as the SP 4722. This is the base part, excluding screws and legs.
If the handle of your Gravity SP 4722 or similar speaker stand is damaged, you can replace it with this Gravity XSP 1368 spare part.
With the Gravity XSP 1370, you have the wind-up mechanism complete with housing, suitable for Gravity SP 4722 or similar speaker stands. This is a spare part.
The Gravity XSP 1372 concerns the central connecting ring for the tripod bracket rods for the Gravity SP 4722 and similar speaker stands. This is a spare part and does not include a screw set.
The Gravity XSP 1031 Replacement Tensioning Screw is needed to mount the height adjustment lever of your Gravity MS 4321 microphone stand. Also compatible with similar Gravity mic stands.
The Gravity XSP 1044 is a plastic inlay that serves as a spare part for the microphone clutch of the Gravity MS 4321 and similar microphone stands.
The Gravity XSP 1058 is a set screw including plastic tip, suitable for Gravity headphone holders or microphone stand adapters. The knob on the screw is fitted with a green, replaceable washer.
The Gravity XSP 1059 is a spare part for the Gravity MS TM 1 table clamp. It is a long set screw fitted with a wide plastic tip to protect smooth surfaces.
The Gravity XSP 1063 is a rubber pad that serves as a spare part for the Gravity MS AMP DS 01. This rubber spacer results in acoustic decoupling.
With the Gravity XSP 1064, you have a set consisting of a single screw and washer. This is a set of spare parts for a Gravity SAT 36 or similar T-Bar for speaker stands.
With the Gravity XSP 1065, you are provided with a spare part for the Gravity SAT 36 B. This is a cap that allows you to cover the horizontal tube.
The Gravity XSP 1069 is an M6 x 8.3 mm set screw with a sharp point, suitable as a spare part for the Gravity MS QT 1 microphone adapter.
The Gravity XSP 1071 concerns the locking mechanism for the Gravity LS Vari-Pole. It is a spare part for this tripod.
The Gravity XSP 1072 concerns the base of a Gravity Vari-Poly tripod. It is a spare part. The foot has a diameter of 85 millimetres.
The Gravity XSP 1073 is a TPE wing nut that serves as a spare part of the Gravity MA TRAY microphone stand accessory. The nut is supplied with a long screw.
For the Gravity MA TRAY microphone stand accessory, the Gravity XSP 1074 is a spare part. This is a wing nut including a short screw.
The Gravity XSP 1075 is a spare part for the Gravity LS 331 B light stand. It is a sturdy steel base weighing 14 kilograms.
The Gravity XSP 1004S is a spare part for Gravity microphone stands equipped with a tripod base. With this tripod base kit, you can replace a damaged tripod at an economical price!
The Gravity XSP 1014S 2-point boom arm hub is a spare part for Gravity microphone stands equipped with a boom arm. Combined with two set screws, it allows you to adjust the boom arm's angle and length.
The Gravity XSP 1016S clamp set is a spare part for Gravity speaker stands. This clamp set allows you to adjust the height of your stand.
The Gravity XSP 1017S is a spare part for a Gravity speaker stand, specifically a speaker leg brace set complete with bolt, nut and washer so you can easily replace a broken support.
With the Gravity XSP 1027S, you have a complete kit consisting of spare parts that allow you to adjust the height of a Gravity keyboard stand.
The Gravity XSP 1092 is a set of 12 rubber anti-slip stoppers that serve as spare parts for the Gravity LTS 01 laptop stand.
The Gravity XSP 1094 spare part consists of two rubber feet for the Gravity LTS 01 laptop stand. These feet fit on the ends of the stand and prevent the stand from shifting.
