Revv Generator G50 Head Black 50W Guitar Amplifier Head with

Revv Generator G50 Head Black 50W Guitar Amplifier Head with Two Notes Torpedo Virtual Cab
Product no: 9000-0134-2236 Bax Music Warranty: This product comes with a 3-year warranty.

General

Built from scratch to deliver modern high-gain sound and a stack of overdriven voicings as well as squeaky cleans, the 50 Watt Revv Generator G50 is a rock and metal all-rounder. Reading like a unique take on that classic hot-rodded, high-gain guitar sound, this compact monster is home to four 12AX7 preamp valves and two EL34 power amp valves, based on the same design as the renowned Revv Purple Channel, so you can expect powerful and intense output supported by increased tightness - all without having to add an extra distortion pedal to the mix. Besides the ultra-contemporary sonic foundation, the Generator also gets extra points for its extra-low and gig-friendly weight.

The Revv Generator G50: A Tonal Panorama

With this Revv-designed, Canadian-built amp head, you're treated to a dynamic and exhaustive panorama of guitar sounds. Two sublime channels are on offer, where the Blue channel spoons out stunning cleans balanced by a light coating of compression, and the Green channel spits full and rich output that can be dialled up from a light distortion to a super-solid crunch at will. Basically, the Generator G50 lays down a base-sound that can already get extreme.

Full Control

The innovative details don't stop there. Two Notes Torpedo DynIR Virtual Cabinet technology comes built-in and ready to go and a set of direct stereo outputs have also been fitted on the back panel, meaning that you're free to perform and record without even needing a speaker cabinet. A mass of switching options are also supplied as well as a buffered effects loop to accommodate your pedalboard; an attenuator that's able to take the output down to a more sensible 10 Watts when needed; and a tasty built-in digital reverb and tight noise gate. The scope may be massive but the control section still manages to keep everything clear and precise, making this model the ideal sidekick for any metal and rock guitarists who demand a grotesque amount of range from one neat box.

Specifications

Product features

Sustainable product	not specified
Amplifier type	tube
Power in Watts	31 - 50 Watts
Speaker output impedance	16 Ohms, 8 Ohms, 4 Ohms
Weight	10 - 14.9 kg
Number of speaker outputs	5
Number of channels	2
Amplifier valve	EL34
Amp modelling	no
Built-in tuner	no
Built-in effects	reverb (digital)
Power attenuator	yes
Effects loop	yes
Connectors	External speaker(s), Footswitch, Headphone, Line-out, MIDI, USB
Colour	black

Weight and dimensions including packaging

Weight (incl. packaging)	16,0 kg
Dimensions (incl. packaging)	55,0 x 37,0 x 32,0 cm

Product specifications

Revv Amplification guitar amplifier top
model: G50 Head
series: Generator
finish: black
amplifier type: valve
output power: 50W
channels: 3
channels:
- channel 1 - clean - 'Blue'
- channel 2 - crunch - 'Green'
- channel 3 - high gain - 'Purple'
preamp tubes: 4x 12AX7
power amplifier tubes: 2x EL34
controls:
- channel 1: level, bass, mids, treble
- channel 2: gain, level, bass, mids, treble
- channel 3: gain, level, bass, mids, treble
- master 1, master 2, presence, depth, phones level, reverb level, gate threshold
switches:
- channel 1: bright, wide
- channel 2: drive
- channel 3: bright, cut, fat
- on/off, on/standby, reverb, gate, virtual cab selector, store, 50W/10W, internal load/speaker, ground/lift
connections:
- 6.35mm mono-jack input
- 6.35mm mono-jack fx return
- 6.35mm mono-jack fx send
- 5-pin DIN foot switch input
- 2x 6.35mm mono-jack 4 Ohm speaker out
- 2x 6.35mm mono-jack 8 Ohm speaker out
- 6.35mm mono-jack 16 Ohm speaker out
- XLR output (left)
- XLR output (right)
- 5-pin DIN MIDI IN
- 5-pin DIN MIDI THRU
- 6.35mm jack phones out
- USB
- cab lighting
built-in digital reverb with reverb level control on rear
built-in noise gate with gate threshold control on rear
Two notes Torpedo Virtual Cab selector: 1-6
Two notes can be edited via Bluetooth
backlit acrylic logo (changing colour)
internal load: automatically activated when no speaker cabinet is connected
bias test point with faulty tube indication
fuses: mains fuse (T2.5A), HT fuse (T1A), fuse V1(T250ma), fuse V2 (T250ma)
attenuator: 50W/10W
module dimensions: 49.53 x 30.48 x 25.70cm
weight: 14.06kg
included: 6-button footswitch
made in Canada