Tone City Pedal Substation 1 multi-power supply for effects pedals

General

The Tone City Pedal Substation 1 is a compact multi-power supply for effects pedals and offers several independent power outputs. It features four 9V DC outputs rated at up to 200 mA and four 9V DC outputs rated at up to 500 mA. In addition, there are two SAG outputs which are adjustable from 9 to 18V and deliver up to 200 mA. Thanks to its advanced filter technology, the power supply operates with low noise, ensuring your pedals are supplied with a reliable and clean power source.

Comprehensive protection

Each power output has its own short-circuit protection. If an output is short-circuited, that output is switched off and the corresponding red status LED lights up. The power supply is also protected against overload. The two SAG outputs are fitted with a control knob that allows you to set the desired voltage between 9 and 18V. All outputs use a 2.1 x 5.5 mm barrel connector with negative polarity in the centre.

Supplied complete

The Pedal Substation 1 operates on a 24V DC input and comes with a 1000 mA 24V DC adaptor. You’ll also receive ten black DC power cables for connecting your effects pedals, along with a user manual and warranty card. The unit measures 165 x 72 x 33 mm and weighs 904 grams according to the product specifications. This makes this multi-power supply a practical solution for pedalboards with multiple effects and varying power requirements.