Fender American Professional II Telecaster Neck Rosewood Fre

Fender American Professional II Telecaster Neck Rosewood Fretboard
Product no: 9000-0090-4817 Bax Music Warranty: This product comes with a 3-year warranty.

General

Set up your Tele with the very best. This Fender American Professional II Telecaster Neck has been hewn from high-grade maple, finished with a Deep-C carve and comes with full Fender USA quality assurance. Whether you're busy with a self-build project or refurbishing an old model, the butter-smooth feel of the Super-Natural satin-gloss lacquer; the round warmth of the rosewood fretboard; the comfy playability of twenty-two Narrow-Tall frets and the enhanced grip and accuracy of a 9.5 inch fretboard radius offer a more-than-solid upgrade. To ease installation, the American Professional II Telecaster Neck comes pre-drilled with neck-bolt and machine head bore holes.

Tips or comments about this product

Let op: bij het bevestigen van de gitaarhals aan een matchende body, kan het voorkomen dat er toch nog enig specialistisch afstelwerk nodig is. Heb je hier geen ervaring mee? Laat dit dan doend door een ervaren gitaarbouwer. Je kunt hiervoor ook van onze afstel-en-onderhoud-service gebruik maken.

Specifications

Product features

Sustainable product	not specified

Weight and dimensions including packaging

Weight (incl. packaging)	1,2 kg
Dimensions (incl. packaging)	75,9 x 19,1 x 8,6 cm

Product specifications

Fender Telecaster Guitar neck
- series: American Professional II
- neck material: maple
- fretboard: rosewood
- number of frets: 22
- fret type: narrow tall
- profile: Deep-C
- finish (back of neck): Super-Natural satin-gloss urethane
- headstock finish: high-gloss urethane
- fretboard radius: 9.5" (241mm)
- scale length: 25.5" (648mm)
- nut material: bone
- nut width: 42.8mm (1.685")
- truss rod nut: 1/8" (3.175mm) adjustable at the headstock
- made in the USA
special features:
- six pre-drilled machine head bore holes
- two pre-drilled holes for mounting each machine head
- finished with a serial number and inspection stamp
dimensions:
- machine head bore hole diameter: .404” (10.26mm)
- head diameter: 540mm
- width at 1st fret: .820” (20.82mm)
- width at 12th fret: .920" (22.86mm)

Write a review

Dean J November 16, 2024

Wrote the following about Fender American Professional II Telecaster Neck Rosewood Fretboard

Beautiful neck which is exactly how i want it: rounded edging, tall narrow frets, glossy fretboard, and satin finish to the neck. It just feels so right. Inspired already and wrote a beautiful new song once i set up my guitar (which was very minimal fuss). Thank you Bax-Shop, yet again!