This vintage Fender Telecaster bridge cover, or 'ashtray' cover, fits vintage-type three-saddle Telecaster bridges. Give your guitar that classic '50s, '60s and '70s look!
This EMG wiring kit provides all the solderless components to install 3 active guitar elements. The potentiometers are split shaft type with the length short shaft. Ideally suited for ST-style guitars.
This Aguilar OBP-3TK/PP on-board preamp for bass guitars allows you to boost and filter bass, mids and trebles. One of the 3 potentiometers has a push/pull function for a selectable mid frequency.
Aguilar's OBP-1TK on-board preamp is an active 2-band EQ to mount into your bass. It lets you boost bass and treble with up to 18 dB. In addition to the OBP-1 preamp, this set contains two high-quality potentiometers.
Aguilar's OBP-2TK on-board preamp is an excellent 2-band equalizer with boost and cut functions for treble and bass. The OBP-2TK comes with two high-quality potentiometers for treble and bass.
This complete EMG wiring kit sets up right-handed guitars with a solderless system so one or two active pickups can be installed without having to touch a soldering iron. This version includes a pack of split, long-shaft pots.
Aguilar's OBP-1SK is a 2-band preamp that can boost both the treble and bass of your bass guitar.
The best component of choice to give your J Bass that vintage '60s look; a chrome-plated Fender vintage bridge cover with F logo for Jazz Bass.
The Aguilar OBP-3SK is an active 3-band EQ for your bass guitar that allows you to boost or filter bass, mids and trebles. It comes with two high-quality potentiometers and a miniswitch for the mid frequencies.
Aguilar's OBP-SK/PP is an on-board preamp set for bass guitars that allows you to boost and filter bass, mids and trebles. It contains two high-quality potentiometers, one of which is a push/pull type.
The Boston BH-1500 battery clip is compatible with both basses and guitars and comes including mounting screws.
This Boston CP-TE-AG is a gold-coloured control plate to mount the potentiometers and element switch. This model is mainly used for T-style guitars.
Made from metal and finished in classic chrome, the flat and square Boston JP-5-C jack plate can be installed via the four pre-drilled mounting holes to upgrade or restore the look of most single-cut electric guitars.
Finished in custom black, the Boston JP-7-B oval jack plate is easily installed via two pre-drilled screw holes to polish off any self-build or restoration job.
This is the EMG EXB. This is a bass expander, intended for electric bass guitar. Turn the potentiometer up to boost the low and high while slightly scooching the middle. Ideal for slapping.
Finished with an internal trim-pot, the EMG PA2 Preamp Boost Toggle Switch can be installed to give guitarists direct access to a maximum boost of 20 decibels as and when it's needed.
Designed for electric guitars, the EMG TKO Momentary Kill Switch is easily installed using EMG's own solderless pickup system, giving you immediate access to satisfying stutter effects.
This is the EMG Toggle Kill Switch (supplied individually). This is a small on/off 2-position switch, suitable to serve as a kill switch for electric guitars with EMG's solderless pickup system.
The Gibson-Style Mounting Plates are perfect for easily mounting 3x3 Ratio Electric tuners on many common electric, semi-acoustic or steel-string Gibson® guitars, without drilling or filling holes.
These 90 Degree Screw Hole Mounting Plates from Graph Tech make it easy to install 3x3 Ratio Electric tuning machines without drilling screw holes. They ensure even pitch changes with each string.
Replace your instrument output with this gold-plated 6.35mm mono Pure Tone jack. Multi-contact design with dual ground and tip for maximum signal transmission.
Replace or upgrade the 6.35 mm stereo output on your guitar or bass with this nickel-plated Pure Tone multi-contact jack: double rings, less noise and a more stable connection.
Grover Leader B 30 5/8 banjo bridge for 4-string tenor banjo, 5/8 inch (15.875 mm) high, hard maple with ebony top and notched string positions.
Complete Grover GP200 assortment box containing bushings, washers and screws for Grover Rotomatic (including SHT), Sta-Tite and Imperial tuning machines in various finishes.
The Boston JP-1-G electric guitar jack plate has a rectangular metal design with four mounting holes and a recessed output jack cut-out.
Install the Boston SH-2-G string guide to ease tension on the nut and help optimise tuning. This cylinder-style guide includes a mounting screw and comes gold-plated for a more deluxe finish.
The Boston JP-9-C is an input cup for T-style guitars. With angled screw holes and inch threads, this part is easy to attach and rock solid.
Boston JP-3-C is a chrome-plated guitar input plate for electric guitar. This oval model has a slightly curved shape and has two screw holes.
High-quality ebony knob for Grover 102 Rotomatics machine heads.
