Miscellaneous Guitar Components

Yamaha WT579800 battery holder for TRB1005 bass guitar

Yamaha ZJ239700 A1 Bracket for SLG200 Silent Guitar

This spare part is the Yamaha ZJ239700 (supplied each). This is a bracket A1, intended for the Yamaha SLG200 Silent Guitar.

AllParts GS-0331-000 Surgical Pickup Mounting Tubing (Set of 6)

This is the AllParts GS-0331-000 Surgical Tubing for Pickup Mounting (supplied per 6 pieces). These are 6 mounting tubes for electric guitar and bass guitar pickups.

AllParts AP-5270-010 Chrome Retrofit Jackplate for Telecasters

With the Allparts AP-5270-010 Chrome Retrofit Jackplate, you can solidly secure a jack output to the body of your Telecaster.

AllParts EP-0151-000 Switchcraft Mono Long Threaded Jack for Electric Guitar

The Allparts EP-0151-000 Switchcraft Mono Long Threaded Jack is compatible with any solid-bodied electric guitar.

Emerson Custom 0.015uf Bumblebee Paper-in-Oil Capacitor Single capacitor each

The Emerson Custom 0.015uf Bumblebee Paper-in-Oil Capacitor is mainly designed for electric guitars equipped with a humbucker pickup in the neck position.

Emerson Custom 0.047uf Paper-in-Oil Capacitor Red & Cream Single capacitor each

The Emerson Custom 0.047uf Paper-in-Oil Capacitor Red & Cream is mainly designed for electric guitars equipped with a single-coil pickups.

AllParts GW-0820-025 White Vintage Style Cloth Wire Braided Pickup Wire

Whether you're building a custom guitar or want to replace faulty wiring, Allparts GW-0820-025 White Vintage Style Cloth Wire might come in handy.

Emerson Custom 0.022uf Paper-in-Oil Capacitor Yellow & Cream Single capacitor each

The Emerson Custom 0.022uf Paper-in-Oil Capacitor Yellow & Cream is mainly designed for electric guitars equipped with humbucker pickups.

AllParts PU-6421-000 wired control plate for Hofner-style bass

Wired control plate for Hofner-style bass with 2 volume knobs and 3 switches.

AllParts GS-0330-000 silicone tubing for replacing pickups

silicone tube for replacement springs in Pickups (30 centimetres).

AllParts Nickel Jack plate for strat for Stratocaster

If you need to replace the jack plate on your Strat-style guitar, then the nickel-plated jack plate by the American brand AllParts is just the thing.

Göldo NP225C Neck Screw Bushings (Chrome)

Göldo's NP225C are bushings used instead of a neck plate to attach a screwed guitar neck to a body. There are 6 chrome ones in this set.

Göldo WKSGB Tuner Staggering Set

The Göldo WKSGB contains nine black rings or washers in different thicknesses that you can place between the tuner housing and the back of the headstock. This way, you can reduce the height of tuning mechanisms.

AllParts BP-0426-001 Locking Nut Neck Shim Set (Set of 3)

This is the AllParts BP-0426-001 (supplied per 3 pieces). This is a Locking Nut Neck Shim Set, intended to raise a Floyd Rose locking nut when needed on your electric guitar with double locking tremolo.

Boston JP-100-B Square Jack Plate (Black)

Made from hard plastic to resist corrosion, the Boston JP-100-B jack plate has a flat and square design and four screw holes so it can be used to polish off or restore most single-cut electric guitars.

EMG 1-2 PU Solderless Conversion Kit (Short-Shaft)

This complete EMG wiring kit sets up right-handed guitars with a solderless system so one or two active pickups can be installed without having to touch a soldering iron. This version includes a pack of split, short-shaft pots.

RightOn Straplink - Woody guitar accessory

Make attaching your guitar strap simple and secure, without having to drill holes or make any modifications to your instrument.

Graph Tech PRT-952-214-B0 Ratio InvisoMatch Mounting Plates 45 Degree Screw Hole Black (Set of 6)

Graph Tech's 45 Degree Screw Hole Mounting Plates for simple installation of 6-in-line Ratio tuners at 'n 45 degree mounting without having to drill new holes. Ensure the same pitch change per string.

Fender Contoured Heel Neck Plate Chrome with Fender Spaghetti Logo

Busy refreshing the look of your Fender Deluxe or Elite Series axe? Don't forget to mount a new neck plate while you're at it!

EMG 3-2 PU Solderless Conversion Kit (short shaft)

This EMG wiring kit provides all the solderless components to install 3 active guitar elements. The potentiometers are split shaft type with the length short shaft. Ideally suited for ST-style guitars.

AllParts EP-0926-023 Small Footprint 9V Battery Box with Battery Lead Clip

This is the AllParts EP-0926-023. This is a Small Footprint 9V Battery Box with Battery Lead, intended to store 9 Volt batteries and at the same time also connect them to a circuit of active elements and/or electronics.

EMG EXG Guitar Expander

This is the EMG EXG. This is a guitar expander, intended for electric guitar. Turn the potentiometer up to boost the low and high while slightly scooching the middle. Excellent for any type of element.

AxLabs Stereo Pure Tone Multi-Contact 1/4″ Output Jack Black Nickel 6.35 mm stereo jack

Upgrade the 6.35 mm stereo output on your (active) guitar or bass with this Pure Tone multi-contact jack in black nickel for more reliable contact, a stronger signal and less noise.