Based on more than 21,240 customer reviews

Sennheiser EW 300 IEM G3 (Band A, 516-558 MHz) promo pack

4 / 5
1 review

Discontinued, this product can no longer be ordered.

No alternatives found
bax-shop.uk | B-stock
Sennheiser EW 300 IEM G3 (Band A, 516-558 MHz) promo pack
Product no: 9000-0014-6970

Product information

General

This Sennheiser EW 300 IEM G3 promo pack consists of four double wireless in-ear monitor systems with an AC 3 active antenna combiner and an NT3-1 power adapter included. If you are considering working with in-ear monitors as a band, this complete package is what you need! By connecting the four separate receivers to the antenna splitter, you can use two antennas. Moreover, the receivers are powered by the ASA 3, you only need to use one NT 3-1 adapter.

The Sennheiser EW 300 IEM G3 in-ear monitor system

Sennheiser's in-ear monitor systems are used all over the world by professionals, and not without reason. The EW 300 IEM G3 allows you to hear yourself in precisely the same way as your audience does. The special thing about this system is that the receiver is equipped with 'Adaptive Diversity', which uses the cable of the earpieces as a second antenna. The earphones come with various sleeves for a perfect fit. They reproduce the signal of the receiver very accurately. The outputs are equipped with pass-through, which allows you to split the signal and send it to other devices. The integrated five-band equalizer in the transmitter allows you to personalise the sound that goes into your ears.

Sennheiser's G3 series is the successor to the well-known G2 series, but this new series of wireless systems has an extensive range of new options. All devices in the G3 series have a built-in equalizer, IR synchronisation, battery status and 19-inch rack mounts.

Please note: this is the A version! The difference between this and the B version is the frequency range of 516 to 558 MHz, which is most commonly used in Belgium. It is not possible to combine the A and the B version!

Sennheiser AC 3 and NT3-1 power supply

If you need to provide a complete band with wireless in-ear monitoring, you will have to face a jumble of antennas in your rack, so bundling signals and transferring them via one antenna is the ideal solution. With the Sennheiser AC 3, you can utilise up to four EW wireless monitor transmitters with just one antenna. The SR 300 IEM G3 transmitters are powered via the BNC cables, so that no separate power supply is required for the transmitters. An NT 3-1 adapter powers the AC 3.

Specifications

Sennheiser EW 300 IEM G3-A-EU in-ear monitor system
4x Sennheiser EW 300 IEM G3-A-EU in-ear monitor system
Sennheiser's in-ear monitor systems are used all over the world by professionals and not without reason. The EW 300 IEM G3 allows you to hear yourself in precisely the same way as your audience does.

Product features

Automatic frequency search function
Yes
Battery life (approx.)
6 hours
Frequency band
Sennheiser ew G4 A (516 - 558 MHz)
Built-in limiter
Yes
Channel
26 (510 - 518 MHz), 27 (518 - 526 MHz), 28 (526 - 534 MHz), 29 (534 - 542 MHz), 30 (542 - 550 MHz), 31 (550 - 558 MHz)
Maximum frequency
18 - 18.9 kHz
Minimum frequency
25 - 29 Hz
Switchable frequencies
Yes
Removable antenna
Yes

Weight and dimensions including packaging

Weight
3,1 kg
Dimensions
45,2 x 37,4 x 7,4 cm

Product specifications

  • rugged metal housing
  • 42 mHz bandwidth: 1,680 adjustable UHF frequencies for interference-proof reception
  • enhanced frequency bank system with up to 16 compatible frequencies
  • Ethernet port for connecting to Wireless Systems Manager (WSM) software for control via computer - this ensures a good overview of monitoring and professional data management for multi-channel systems
  • 'Adaptive Diversity'-reception for high reception quality
  • 'pilot tone squelch’ for elimination of RF interference when the transmitter is turned off
  • automatic frequency scan searches for available frequencies
  • enhanced AF frequency range
  • increased range for audio sensitivity
  • wireless synchronisation of transmitter parameter from transmitter
  • user-friendly menu operation with more control options
  • auto-lock function prevents accidental alterations in settings
  • HDX compander for crystal-clear sound
  • transmitter has a 4-step battery indication
  • mute function for the transmitter
  • 5-band graphic EQ integrated in transmitter
  • HiBoost, adjustable limiter, stereo/focus mode and balance in receiver
  • contacts for recharging the BA 2015 battery pack directly in the transmitter
  • FM, MPX stereo modulation
  • RF frequency range 516 to 558 MHz
  • 1,680 transmitter/receiver frequencies
  • 12 presets
  • switching bandwidth: 42 MHz
  • peak deviation: approximately 48 kHz
  • frequency response: 25 to 18,000 Hz
  • signal/noise ratio: > 90 dB (A)
  • THD less than 0.9 %
  • in accordance with ETS 300422, ETS 300445, CE, FCC
  • BNC, antenna connector
  • 2x XLR-3 / 3.5mm jack audio connector
  • input voltage range +22 dBu maximum
  • headphones connector over 100 mW (32 Ohm)
  • stand-alone voltage 12 V DC nominal
  • life span: 4 to 6 hours
  • dimensions transmitter 212 x 202 x 43 mm
  • weight transmitter: 1,100 gram
  • dimensions receiver: 82 x 64 x 24 mm
  • weight receiver: 160 gr
Sennheiser AC 3 active 4-channel antenna combiner for EW
1x Sennheiser AC 3 active 4-channel antenna combiner for EW
The active AC 3 can service up to four wireless monitor transmitters out of the Sennheiser EW series, which ensures a handy 4-channel antenna combiner. All of this is done via one antenna!

Product features

Active or passive
Active
Polar pattern
Not applicable
Dispersion angle
Not applicable
Antenna type / accessory
Splitter / combiner
Data plug type
BNC
Type of frequency band
Not applicable

Weight and dimensions including packaging

Weight
2,0 kg
Dimensions
25,0 x 22,0 x 9,0 cm

Product specifications

  • 4-channel antenna combiner
  • only 1 antenna required for 4 in-ear monitor systems
  • suited for EW series
  • frequency range: 500-870 MHz
  • distribution damping: 0 dB (± 1 dB)
  • sensitivity: 30 mW
  • impedance: 50 Ohm
  • power supply: 13.8 V DC (via optional Sennheiser NT 3-1 power adapter)
  • total power consumption: 3.4 A (with connected transmitters)
  • power supply voltage to transmitters (RF IN 1 - RF IN 4): 11.4 V / 350 mA
  • operating temperature: -10 °C to +55 °C
  • storage temperature: -20 ° C to +70 ° C
  • dimensions: approx. 212 x 168 x 43 mm
  • weight: 1,470 grams
Sennheiser NT3-1 adapter power supply
1x Sennheiser NT3-1 adapter power supply
Power supply for two or three L 2015 chargers.

Product features

Sustainable product
Not specified
Type of charger & docking station
Power / adapter
Type of power adapter
Specific

Weight and dimensions including packaging

Weight
400 gr
Dimensions
17,0 x 8,0 x 7,5 cm

Product specifications

- fit for AC3 / L 2015
- European plug

Sennheiser EW 300 IEM G3-A-EU in-ear monitor system This product comes with a 3-year warranty.

Sennheiser AC 3 active 4-channel antenna combiner for EW This product comes with a 3-year warranty.

Sennheiser NT3-1 adapter power supply This product comes with a 3-year warranty.

Reviews (1)

4.0
1 review

Rating

5 stars 0 4 stars 1 3 stars 0 2 stars 0 1 star 0
A review can no longer be written about this item

Reviews from other countries

4 / 5

Sennheiser EW 300 IEM G3-A-EU in-ear monitor system

Waar voor het geld!



Ik heb net deze set aangeschaft en ik heb er nog geen minuut spijt van gehad.



De kostprijs weegt echt niet op tegen het gebruiksgemak en de geluidskwaliteit.



Door geregeld op te treden en steeds weer niet tevreden te zijn van de monitors, besloot ik om te investeren in een IEM systeem.



De Sennheiser is reeds wat ouder, maar blijft wel hét apparaat wat ook door de pro’s wordt gebruikt.

Hij doet gewoon goed, wat hij moet doen.



De enige minpuntje vind ik persoonlijk de meegeleverde oortjes, aangezien die leuk zijn voor op je GSM of als backup (tip: koop er ineens goeie bij).

Daarnaast is ook de automatische scan functie niet zo duidelijk uitgelegd in het boekje.



Tip:

Je moet eerst deze functie inschakelen op de zender en dan pas op de ontvanger, na het scannen moet je (zonder dar je het kanaal al selecteert) dit voor je zeker houden zodat die hem overneemt.



Ik ben heel tevreden, zowel van het apparaat als van de service bij Bax!
 | 
This review was automatically translated from Dutch.

Other products from Sennheiser

Find all products of the brand Sennheiser

Alternative products by other brands

Search all products in category In-Ear Set

Related products from Sennheiser

Find all products from the brand Sennheiser in the category In-Ear Set

Latest posts

7 March 2017 Sennheiser's EW300 In-ear Monitor Systems - Special Price Throughout March
Compare your gear (1/10)
Clear Compare