Based on more than 21,240 customer reviews

Audio Technica AT2020 + Reflection Filter, Cable and Stand

Discontinued, this product can no longer be ordered.

No alternatives found
Not sure if the Audio Technica AT2020 + Reflection Filter, Cable and Stand is for you? Do a Choice Check. Start Choice Checker
Audio Technica AT2020 + Reflection Filter, Cable and Stand
Product no: 9000-0057-2837

Audio Technica AT2020 Condenser Microphone This product comes with a 3-year warranty, the styluses come with a manufacturing defects warranty.

Devine MIC100/10 XLR Microphone/Signal Cable, 10m This product comes with a manufacturing defects warranty.

Gravity MS 43 Microphone Stand (Black) This product comes with a 5-year warranty.

Devine RF 20 Reflection Filter This product comes with a 3-year warranty.

Specifications

Audio Technica AT2020 Condenser Microphone
1x Audio Technica AT2020 Condenser Microphone
The AT2020 condenser microphone by Audio Technica has a wide dynamic range and a natural frequency response. It includes a microphone clip and a storage pouch.

Product features

Tube microphone
No
Microphone sensitivity (dBV/PA)
-37
Microphone impedance
100-149 ohms
Low-cut filter
No
Maximum SPL
140 dB - 149 dB
Maximum frequency
20 - 20.9 kHz
Microphone accessories
Microphone clip, bag / box
Minimum frequency
20 - 21 Hz
Pad switch
No
Polar pattern
Cardioid
Stereo
No

Weight and dimensions including packaging

Weight
782 gr
Dimensions
25,0 x 24,5 x 6,5 cm

Product specifications

  • Audio Technica AT2020
  • condenser microphone
  • pickup pattern: cardioid
  • frequency response: 20 Hz to 20 kHz
  • impedance: 100 Ohms
  • sensitivity: -37 dBV/PA
  • max. SPL: 144 dB
  • phantom power required: 48V
  • connector: 3-pin XLR
  • included:
    • mic clip with 5/8 - 3/8-inch thread adapter
    • storage pouch
  • dimensions: 52 x 162mm
  • weight: 345 g

 

Devine MIC100/10 XLR Microphone/Signal Cable, 10m
1x Devine MIC100/10 XLR Microphone/Signal Cable, 10m
Close any huge XLR signal-based gap with this 10-metre microphone/signal cable from Devine! Equipped with durable plugs and wrapped up inside fully flexible and protective sheathing, the MIC100/10 ensures solid, reliable signal transfer.

Product features

(partially) coiled
No
Sustainable product
Not specified
Right angled or straight
Straight - straight
Colour
Black
Length
10.00 m
Set
No
Audio connector
3-pin XLR
Type of vlogging accessory
Cable

Weight and dimensions including packaging

Weight
498 gr
Dimensions
24,0 x 24,0 x 4,0 cm

Product specifications

  • XLR male - XLR female
  • can be used as a microphone cable or as an all-round signal cable
  • supple, rugged cable
  • high-grade connectors with locking option
  • connectors with pull relief to retain contact integrity
  • length: 10m
  • filling: cotton
  • oxygen-free copper
  • isolation diameter: 1.4mm
  • isolation colours: red and white
  • number of conductors: 2
  • inner conductor diameter: 0.226mm²
  • conductor dimensions: 20 x 0.12mm
  • helical sheathing: 0.12 x 64
  • cable diameter: 6mm
  • sheathing material: flexible PVC
  • operating temperature: -20 - +70°C
  • capacity @ 1 kHz:
    • cond.-cond.: 131pF/m
    • cond.-shield.: 178pF/m
Gravity MS 43 Microphone Stand (Black)
1x Gravity MS 43 Microphone Stand (Black)
Gravity's MS 43 is a straight microphone stand with a clutch and a black finish. This sturdy model is height adjustable up to 169 cm and features a die-cast zinc base and three legs for secure stability.

Product features

Sustainable product
Not specified
Type of stand
Straight stand
Boom arm
No
Construction
2-part telescopic
Type of stand base
Flat base feet
Height adjustable
Yes
Mininum stand height
100 to 110 cm
Maximum height of stand
160 to 170 cm
Screw thread size
3/8 inch, 5/8 inch
Stand material
Steel
Microphone stand weight
2 - 3 kg
Colour
Black
Set
No
Included stand accessories
None
Number of stands
1

Weight and dimensions including packaging

Weight
2,5 kg
Dimensions
89,0 x 11,0 x 10,0 cm

Product specifications

  • Gravity MS 43
  • microphone with clutch
  • material: steel
  • colour: black
  • finish: powder-coating
  • min. height: 1030 mm
  • max. height: 1690 mm
  • transport length: 900 mm
  • height adjustment: yes
  • base: tri-pod
  • material: die-cast zinc
  • included colour-coding rings: 1x 15mm, 4x 20 mm (black)
  • weight: 2.3 kg
Devine RF 20 Reflection Filter
1x Devine RF 20 Reflection Filter
The Devine RF 20 is a great way to counter less-than optimum acoustics. This reflection filter has a durable construction with a collapsible panel and enables you to get the out of any vocal performance.

Product features

Reflection filter mount
Microphone stand mount
Sustainable product
Not specified
Includes pop filter / cap
No
Reflection filter for
Vocal microphones, guitar microphones
Type of vlogging accessory
Reflection filter

Weight and dimensions including packaging

Weight
3,0 kg
Dimensions
35,5 x 28,0 x 14,5 cm

Product specifications

  • reflection filter
  • for optimisation of your vocal recordings
  • absorbs reflections, caused by the acoustics of your recording space
  • adjustable angle, collapsible panel
  • material: rigid foam
  • perforated aluminium front panel
  • microphone holder equipped with a screw thread adapter
  • suited for nearly any microphone clip and shockmount
  • can be mounted on nearly any vertical microphone stand
  • 3/8" and 5/8" screw thread
4.7
343 reviews

Rating

5 stars 273 4 stars 56 3 stars 6 2 stars 3 1 star 5
A review can no longer be written about this item
5 / 5

Gravity MS 43 Microphone Stand (Black)

Since discovering Gravity stands I have used for live (drummer vocals) and general studio work. After 5 years all I broke was a clutch. I ordered a replacement directly from Bax which was delivered from their spare parts stock very quickly.
It’s everything you look for in a supplier - price, service, quality.
 | 
5 / 5

Devine MIC100/10 XLR Microphone/Signal Cable, 10m

Good quality, Customer service was very good and delivered within 3 days.
Thanks to bax music
 | 
5 / 5

Devine RF 20 Reflection Filter

Awesome product!
 | 
5 / 5

Devine MIC100/10 XLR Microphone/Signal Cable, 10m

The package was sent promptly, arrived on time. I've been using this mic with the Beringer deq2496 also purchased from Bax music and it's working very well. Customer service was very good when I called to modify my order.
 | 
5 / 5

Devine RF 20 Reflection Filter

Fantastic reflection filter builds a soundproof environment around my microphone and I can tell the difference in the recordingsame.
 | 

Reviews from other countries

5 / 5

Devine MIC100/10 XLR Microphone/Signal Cable, 10m

Goede microfoon kabels!!!
 | 
This review was automatically translated from Dutch.
5 / 5

Devine MIC100/10 XLR Microphone/Signal Cable, 10m

Bon rapport qualité/prix je recommande
 | 
This review was automatically translated from French.
5 / 5

Devine MIC100/10 XLR Microphone/Signal Cable, 10m

Prima kabel voor een prima prijs. Netjes verzonden en een snelle levering top service!
 | 
This review was automatically translated from Dutch.
5 / 5

Devine MIC100/10 XLR Microphone/Signal Cable, 10m

handig en goedkoop
 | 
This review was automatically translated from Dutch.
5 / 5

Devine MIC100/10 XLR Microphone/Signal Cable, 10m

Snelle levering, goede kabel. Niks op aan te merken!
 | 
This review was automatically translated from Dutch.

Other products from Audio Technica

Find all products of the brand Audio Technica
Compare your gear (1/10)