▾

Audio Technica AT2020 + Reflection Filter, Cable and Stand

Discontinued, this product can no longer be ordered.

No alternatives found

Not sure if the Audio Technica AT2020 + Reflection Filter, Cable and Stand is for you? Do a Choice Check. Start Choice Checker

Product information
360° Photo
Reviews (343)
Downloads (2)

Audio Technica AT2020 + Reflection Filter, Cable and Stand
Product no: 9000-0057-2837 Bax Music Warranty: Audio Technica AT2020 Condenser Microphone This product comes with a 3-year warranty, the styluses come with a manufacturing defects warranty. Devine MIC100/10 XLR Microphone/Signal Cable, 10m This product comes with a manufacturing defects warranty. Gravity MS 43 Microphone Stand (Black) This product comes with a 5-year warranty. Devine RF 20 Reflection Filter This product comes with a 3-year warranty.

Specifications

1x Audio Technica AT2020 Condenser Microphone
The AT2020 condenser microphone by Audio Technica has a wide dynamic range and a natural frequency response. It includes a microphone clip and a storage pouch.

Product features

Tube microphone	no
Microphone sensitivity (dBV/PA)	-37
Microphone impedance	100-149 ohms
Low-cut filter	no
Maximum SPL	140 dB - 149 dB
Maximum frequency	20 - 20.9 kHz
Microphone accessories	microphone clip, bag / box
Minimum frequency	20 - 21 Hz
Pad switch	no
Polar pattern	cardioid
Stereo	no

Weight and dimensions including packaging

Weight (incl. packaging)	782 gr
Dimensions (incl. packaging)	25,0 x 24,5 x 6,5 cm

Product specifications

Audio Technica AT2020
condenser microphone
pickup pattern: cardioid
frequency response: 20 Hz to 20 kHz
impedance: 100 Ohms
sensitivity: -37 dBV/PA
max. SPL: 144 dB
phantom power required: 48V
connector: 3-pin XLR
included:
- mic clip with 5/8 - 3/8-inch thread adapter
- storage pouch
dimensions: 52 x 162mm
weight: 345 g

1x Devine MIC100/10 XLR Microphone/Signal Cable, 10m
Close any huge XLR signal-based gap with this 10-metre microphone/signal cable from Devine! Equipped with durable plugs and wrapped up inside fully flexible and protective sheathing, the MIC100/10 ensures solid, reliable signal transfer.

Product features

(partially) coiled	no
Sustainable product	not specified
Right angled or straight	straight - straight
Colour	black
Length	10.00 m
Set	no
Audio connector	3-pin XLR
Type of vlogging accessory	cable

Weight and dimensions including packaging

Weight (incl. packaging)	498 gr
Dimensions (incl. packaging)	24,0 x 24,0 x 4,0 cm

Product specifications

XLR male - XLR female
can be used as a microphone cable or as an all-round signal cable
supple, rugged cable
high-grade connectors with locking option
connectors with pull relief to retain contact integrity
length: 10m
filling: cotton
oxygen-free copper
isolation diameter: 1.4mm
isolation colours: red and white
number of conductors: 2
inner conductor diameter: 0.226mm²
conductor dimensions: 20 x 0.12mm
helical sheathing: 0.12 x 64
cable diameter: 6mm
sheathing material: flexible PVC
operating temperature: -20 - +70°C
capacity @ 1 kHz:
- cond.-cond.: 131pF/m
- cond.-shield.: 178pF/m

1x Gravity MS 43 Microphone Stand (Black)
Gravity's MS 43 is a straight microphone stand with a clutch and a black finish. This sturdy model is height adjustable up to 169 cm and features a die-cast zinc base and three legs for secure stability.

Product features

Sustainable product	not specified
Type of stand	straight stand
Boom arm	no
Construction	2-part telescopic
Type of stand base	flat base feet
Height adjustable	yes
Mininum stand height	100 to 110 cm
Maximum height of stand	160 to 170 cm
Screw thread size	3/8 inch, 5/8 inch
Stand material	steel
Microphone stand weight	2 - 3 kg
Colour	black
Set	no
Included stand accessories	none
Number of stands	1

Weight and dimensions including packaging

Weight (incl. packaging)	2,5 kg
Dimensions (incl. packaging)	89,0 x 11,0 x 10,0 cm

Product specifications

Gravity MS 43
microphone with clutch
material: steel
colour: black
finish: powder-coating
min. height: 1030 mm
max. height: 1690 mm
transport length: 900 mm
height adjustment: yes
base: tri-pod
material: die-cast zinc
included colour-coding rings: 1x 15mm, 4x 20 mm (black)
weight: 2.3 kg

1x Devine RF 20 Reflection Filter
The Devine RF 20 is a great way to counter less-than optimum acoustics. This reflection filter has a durable construction with a collapsible panel and enables you to get the out of any vocal performance.

Product features

Reflection filter mount	microphone stand mount
Sustainable product	not specified
Includes pop filter / cap	no
Reflection filter for	vocal microphones, guitar microphones
Type of vlogging accessory	reflection filter

Weight and dimensions including packaging

Weight (incl. packaging)	3,0 kg
Dimensions (incl. packaging)	35,5 x 28,0 x 14,5 cm

Product specifications

reflection filter
for optimisation of your vocal recordings
absorbs reflections, caused by the acoustics of your recording space
adjustable angle, collapsible panel
material: rigid foam
perforated aluminium front panel
microphone holder equipped with a screw thread adapter
suited for nearly any microphone clip and shockmount
can be mounted on nearly any vertical microphone stand
3/8" and 5/8" screw thread

A review can no longer be written about this item

Stix January 15, 2025

Wrote the following about Gravity MS 43 Microphone Stand (Black)

Since discovering Gravity stands I have used for live (drummer vocals) and general studio work. After 5 years all I broke was a clutch. I ordered a replacement directly from Bax which was delivered from their spare parts stock very quickly.
It’s everything you look for in a supplier - price, service, quality.

Gad July 17, 2024

Wrote the following about Devine MIC100/10 XLR Microphone/Signal Cable, 10m

Good quality, Customer service was very good and delivered within 3 days.
Thanks to bax music

Louise October 7, 2020

Wrote the following about Devine RF 20 Reflection Filter

Awesome product!

Ash April 23, 2020

Wrote the following about Devine MIC100/10 XLR Microphone/Signal Cable, 10m

The package was sent promptly, arrived on time. I've been using this mic with the Beringer deq2496 also purchased from Bax music and it's working very well. Customer service was very good when I called to modify my order.

arbaaz s. September 13, 2016

Wrote the following about Devine RF 20 Reflection Filter

Fantastic reflection filter builds a soundproof environment around my microphone and I can tell the difference in the recordingsame.