Audio Technica AT2020 set with ATH-M20x and IVA 08 XLR

4.3 / 5

Specifications

1x Audio Technica AT2020 Condenser Microphone

The AT2020 condenser microphone by Audio Technica has a wide dynamic range and a natural frequency response. It includes a microphone clip and a storage pouch.

Product features

Tube microphone: No
Microphone sensitivity (dBV/PA): -37
Microphone impedance: 100-149 ohms
Low-cut filter: No
Maximum SPL: 140 dB - 149 dB
Maximum frequency: 20 - 20.9 kHz
Microphone accessories: Microphone clip, bag / box
Minimum frequency: 20 - 21 Hz
Pad switch: No
Polar pattern: Cardioid
Stereo: No

Weight and dimensions including packaging

Weight: 782 gr
Dimensions: 25,0 x 24,5 x 6,5 cm

Product specifications

Audio Technica AT2020
condenser microphone
pickup pattern: cardioid
frequency response: 20 Hz to 20 kHz
impedance: 100 Ohms
sensitivity: -37 dBV/PA
max. SPL: 144 dB
phantom power required: 48V
connector: 3-pin XLR
included:
- mic clip with 5/8 - 3/8-inch thread adapter
- storage pouch
dimensions: 52 x 162mm
weight: 345 g

1x Audio Technica ATH-M20x Studio Headphones

Audio Technica's ATH-M30 have a successor: the ATH-M20x. The X seems to stand for eXtra: great isolation, improved audio and a new design.

Product features

Active noise suppression: No
Wireless: No
Rotatable earpad: No
Headphone weight: 190g
Headphone construction: Closed
Headphone impedance: 40-49 ohms
In/on/over ear: Over-ear
Includes microphone: No
Design can be folded/dismantled: No
Adjustable bass boost: No
Removable cable: No
Cable length: > / = 300 cm
Colour: Black
Maximum frequency: 20 - 20.9 kHz
Minimum frequency: 15 - 17 Hz
Audio connector: Jack 3.5 mm TRS, jack 6.3 mm TRS
Volume control: No

Weight and dimensions including packaging

Weight: 400 gr
Dimensions: 26,0 x 19,0 x 10,0 cm

Product specifications

closed studio headphones
over-ear construction
driver diameter: 40 mm
magnet type: neodymium
frequency response: 15 Hz - 20 kHz
max. input power: 700 mW
sensitivity: 96 dB
impedance: 47 Ohms
cable length: 3 m
connector: 3.5mm mini jack
including adapter to 6.3 mm
weight: 190 g (excl. cable and connector)

1x Innox IVA 08 XLR Broadcast Microphone Stand

Equipped with an adjustable boom arm, the Innox IVA 08 is an indispensable tool for radio broadcasters and voice-over artists. This broadcast microphone stand comes complete with a table clamp, XLR cable and a stable base.

Product features

Number of stands: 1
Sustainable product: Not specified
Microphone stand weight: Not applicable
Boom arm: No
Height adjustable: Not applicable
Colour: Black
Stand material: Steel
Maximum height of stand: Not applicable
Included stand accessories: Integrated cable (XLR)
Mininum stand height: Not applicable
Podcast bundle: No
Screw thread size: 5/8 inch
Set: No
Construction: Not applicable
Accessory type: Broadcast arm
Type of stand: Broadcast stand
Type of stand base: Not applicable
Type of vlogging accessory: Microphone stand / clip

Weight and dimensions including packaging

Weight: 2,0 kg
Dimensions: 56,0 x 18,0 x 8,5 cm

Product specifications

microphone stand
ideal for broadcasting applications
can be adjusted in various ways for optimal positioning
two hinges with spring mechanism
with table clamp and stable base
colour: black
XLR microphone cable included
cable length: 350cm at the base, 30cm at the boom arm
boom arm length: 50 + 50 cm
minimal gauge table top for fastening clamp: 3mm
maximum gauge table top for fastening clamp: 55mm

Specifications

1x Audio Technica AT2020 Condenser Microphone

The AT2020 condenser microphone by Audio Technica has a wide dynamic range and a natural frequency response. It includes a microphone clip and a storage pouch.

Product features

Tube microphone: No
Microphone sensitivity (dBV/PA): -37
Microphone impedance: 100-149 ohms
Low-cut filter: No
Maximum SPL: 140 dB - 149 dB
Maximum frequency: 20 - 20.9 kHz
Microphone accessories: Microphone clip, bag / box
Minimum frequency: 20 - 21 Hz
Pad switch: No
Polar pattern: Cardioid
Stereo: No

Weight and dimensions including packaging

Weight: 782 gr
Dimensions: 25,0 x 24,5 x 6,5 cm

Product specifications

Audio Technica AT2020
condenser microphone
pickup pattern: cardioid
frequency response: 20 Hz to 20 kHz
impedance: 100 Ohms
sensitivity: -37 dBV/PA
max. SPL: 144 dB
phantom power required: 48V
connector: 3-pin XLR
included:
- mic clip with 5/8 - 3/8-inch thread adapter
- storage pouch
dimensions: 52 x 162mm
weight: 345 g

1x Audio Technica ATH-M20x Studio Headphones

Audio Technica's ATH-M30 have a successor: the ATH-M20x. The X seems to stand for eXtra: great isolation, improved audio and a new design.

Product features

Active noise suppression: No
Wireless: No
Rotatable earpad: No
Headphone weight: 190g
Headphone construction: Closed
Headphone impedance: 40-49 ohms
In/on/over ear: Over-ear
Includes microphone: No
Design can be folded/dismantled: No
Adjustable bass boost: No
Removable cable: No
Cable length: > / = 300 cm
Colour: Black
Maximum frequency: 20 - 20.9 kHz
Minimum frequency: 15 - 17 Hz
Audio connector: Jack 3.5 mm TRS, jack 6.3 mm TRS
Volume control: No

Weight and dimensions including packaging

Weight: 400 gr
Dimensions: 26,0 x 19,0 x 10,0 cm

Product specifications

closed studio headphones
over-ear construction
driver diameter: 40 mm
magnet type: neodymium
frequency response: 15 Hz - 20 kHz
max. input power: 700 mW
sensitivity: 96 dB
impedance: 47 Ohms
cable length: 3 m
connector: 3.5mm mini jack
including adapter to 6.3 mm
weight: 190 g (excl. cable and connector)

1x Innox IVA 08 XLR Broadcast Microphone Stand

Product features

Number of stands: 1
Sustainable product: Not specified
Microphone stand weight: Not applicable
Boom arm: No
Height adjustable: Not applicable
Colour: Black
Stand material: Steel
Maximum height of stand: Not applicable
Included stand accessories: Integrated cable (XLR)
Mininum stand height: Not applicable
Podcast bundle: No
Screw thread size: 5/8 inch
Set: No
Construction: Not applicable
Accessory type: Broadcast arm
Type of stand: Broadcast stand
Type of stand base: Not applicable
Type of vlogging accessory: Microphone stand / clip

Weight and dimensions including packaging

Weight: 2,0 kg
Dimensions: 56,0 x 18,0 x 8,5 cm

Product specifications

microphone stand
ideal for broadcasting applications
can be adjusted in various ways for optimal positioning
two hinges with spring mechanism
with table clamp and stable base
colour: black
XLR microphone cable included
cable length: 350cm at the base, 30cm at the boom arm
boom arm length: 50 + 50 cm
minimal gauge table top for fastening clamp: 3mm
maximum gauge table top for fastening clamp: 55mm

Service promise

Audio Technica AT2020 Condenser Microphone This product comes with a 3-year warranty, the styluses come with a manufacturing defects warranty.

This product comes with a 3-year warranty, the styluses come with a manufacturing defects warranty.

Audio Technica ATH-M20x Studio Headphones This product comes with a 3-year warranty, the styluses come with a manufacturing defects warranty.

This product comes with a 3-year warranty, the styluses come with a manufacturing defects warranty.

Innox IVA 08 XLR Broadcast Microphone Stand This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Reviews (120)

4.3

120 reviews

Rating

5 stars 66 4 stars 32 3 stars 13 2 stars 6 1 star 3

A review can no longer be written about this item

5 / 5

Audio Technica ATH-M20x Studio Headphones

Really good quality headphones. Sturdy construction, keep out plenty of outside noise. I wear mine for commentary at sporting events and they even cope with the PA system at Castleford. Comfortable fit, no sweaty-ear syndrome that you get with some big cans.

May 8, 2019 | Matt N

5 / 5

Innox IVA 08 XLR Broadcast Microphone Stand

Good product easy to assemble the microphone into the stand and easy to use. Highly recommend!!

November 4, 2016 | Mihai P.

Reviews from other countries

5 / 5

Innox IVA 08 XLR Broadcast Microphone Stand

De arm werd geleverd met een montage om het in een bureau vast te maken, en een klemmontage. Meteen kreeg ik een goede indruk op de arm, en zodra ik hem had opgezet, wat nog geen 5 minuten duurde, vond ik het al heel goed.
Je kan de microfoon heel makkelijk krijgen waar je wilt. Het opzetten kostte geen moeite, en je hoeft geen externe kabel voor de microfoon te gebruiken, omdat er een in de arm zelf zit. Ook komt de arm niet in de weg, wat heel fijn is.
Ook goede kwaliteit, levering en service. 10/10

March 23, 2025 | Nick