Briteq BEAM FURY-1 single-beam projector

General

Imagine this: the stage and the dance floor are covered in a soft layer of mist, the beat drops, and the audience goes wild. Complete the picture with an impressive beam of light from the Briteq Beam Fury-1 projector that can cut right through the mist and elevate your show to the next level! The source of this light is a 4-degree lens and the beam generated is straight as an arrow. The Fury-1 comes with two frost filters (10 and 45 degrees) for softer wash effects.

Features of the Briteq Beam Fury-1

The Fury-1's light beam can be aimed every which way with the endless pan/tilt rotations that boast 16-bit precision. DMX users are sure to appreciate the 12 or 14 DMX channels available, and for maximum compatibility, both 3-pin and 5-pin DMX systems are supported. For professional shows, it's good to know that the LEDs run on 1200 Hz, so using the machine for TV studio purposes should be no problem. To top it all off, the Fury-1 moving head is cost-efficient and eco-friendly!