Innox DJ-TRUSS ACC-2 Accessory Pack

Lighting truss width (cm)	300
Max. bearing capacity (kg)	not specified

Ordered before 10pm: Delivered in 2 Working Days (if in stock)
Free delivery from £50

Innox DJ-TRUSS ACC-2 Accessory Pack
Product no: 9000-0065-7725 Bax Music Warranty: This product comes with a 3-year warranty.

General

The Innox DJ-TRUSS ACC-2 accessory pack can be combined with the DJ-TRUSS 100/150 straight pieces from the Innox DJ-TRUSS Series. The Innox DJ-TRUSS system is an entry-level model aimed at more basic use, meaning it's not the type of system you'd set up in clubs, but one you could deploy at small, local events and dress up with LED spots or a handful of humble light effects.

What's Included With The ACC-2 Pack?

The ACC-2 accessory pack includes four 45-degree corner pieces which allow you to build an arch-like construction - plus two rectangular base units that prevent your construction from toppling over. These base units come equipped with adjustable feet to accommodate slightly uneven surfaces and, in addition to a transport bag and the aforementioned corner pieces, they come complete with all of the hardware needed to secure everything.

Use

What's great about the DJ-TRUSS ACC-2 set is that it gives you the freedom to create a custom set-up. That said, please bear in mind that this system has not been designed for daily, heavy-duty use so, for proper stability, it's recommended that you do not surpass 260cm in height and 300cm in width. These dimensions can be realised using two vertical DJ-TRUSS 150 units in combination with three DJ-TRUSS 100s, completing a simple but solid background truss system you could decorate or furnish with lights.

Tips or comments about this product

Please note: This product includes the parts seen in the first image only. Any other products seen in the images serve illustrative purposes only and are not included.

Specifications

Product features

Sustainable product	not specified
Lighting truss height (cm)	260
Lighting truss width (cm)	300
Max. bearing capacity (kg)	not specified

Weight and dimensions including packaging

Weight (incl. packaging)	7,9 kg
Dimensions (incl. packaging)	102,0 x 29,0 x 18,5 cm

Product specifications

accessory pack for Innox DJ-truss system
contents: x2 long baseplates, x4 45° corner pieces
accessory pack bag included
mounting hardware included
this pack is only compatible with straight Innox DJ-truss pieces (sold separately)
easily couple to truss pieces via small wing nuts (included)
adjustable baseplate feet

Write a review

TRT68 December 6, 2024

Wrote the following about Innox DJ-TRUSS ACC-2 Accessory Pack

A great design, let down by poor manufacturing and quality control. Components like the 45° bends do not easily fit together due to a limited amount of play in the socket and post weldings. All three legs must be seated perfectly in their corresponding sockets for the wing nuts to go through to the tapped hole in the post, but if the welding of the pre-drilled wider tube used to make the socket is off by a fraction on just one of the legs, then only 1 or 2 of the 3 holes required will line up sufficiently to allow the wing nuts to go in. I'll try putting a bigger external chamfer on the mis-welded legs, and hopefully that will allow the end of the bar to slip inside the hollow tube enough that the wing nut will line up and go in. As it is, the wing nuts will become cross-threaded - they are too soft (mild steel) - if I try to force them in at the unnatural angle required by the misalignment.

I'm somewhat disappointed in this given the price of these and the good name of Innox. I'd return them but there's too little time between now and when they are needed.