Based on more than 21,240 customer reviews

Ayra Beam Power Pack lighting starter kit

Recommended price £171.60
£169 incl. 20% VAT
Online stock status:
Order now and receive delivery within approx. 4 weeks
TEMPORARY 5% EXTRA DISCOUNT WITH CODE: EM262
Ayra Beam Power Pack lighting starter kit
Product no: 9000-0149-4675 Bax Music Warranty: Ayra TDC Burst 6 LED Light Effect This product comes with a 3-year warranty. Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar This product comes with a 3-year warranty. Devine DMX50/1.5 3-pin XLR DMX Cable, 1.5m This product comes with a 3-year warranty.

General

Want powerful beams without moving heads or mirrors? The Ayra TDC Burst 6 is an effect reminiscent of a mirror ball, but with much more power and control. This set contains two of these units. Each Burst 6 shoots sharp, coloured beams into the room from six lenses. Because you have two, you can create a wide field of light that covers the dance floor well.

Ready to use

The set comes complete with a sturdy Innox light stand with T-bar. From this, you easily hang both Burst effects. With the included DMX cable, you connect the two lights. Put them in master/slave mode and they react exactly the same to the music, ensuring a calm and organised light scene. A highly effective set that consumes little power but performs big.

Specifications

Ayra TDC Burst 6 LED Light Effect 2x Ayra TDC Burst 6 LED Light Effect
The Ayra Burst 6 is a compact LED light effect with a dynamic light output. Operable via DMX or as a stand-alone device, and equipped with a 9W RGB LED and six sharp lenses, this potent unit can create multiple beautifully defined beams.

Product features

Number of DMX channels 8
Sustainable product not specified
Light source colour red, green, blue
Music operated yes
Light effect type other
Accessory type Light effects
Battery operated (rechargeable) no

Weight and dimensions including packaging

Weight (incl. packaging) 3,0 kg
Dimensions (incl. packaging) 27,0 x 27,0 x 23,0 cm

Product specifications

  • LED light effect
  • creates numerous narrow, colourful, moving light beams
  • light source: 1x RGB LED (9 W)
  • razor sharp lenses for intense light projection
  • each LED can be controlled separately
  • limited heat generation
  • low power consumption compared to halogen lights
  • built-in microphone for sound-controlled mode
  • stroboscope function
  • LED display with setting options
  • operating modes: automatic, sound-controlled, master/slave, DMX
  • DMX control via 3-pole XLR
  • number of DMX channels: 8
  • can be controlled via DMX512 protocol
  • mains voltage: 100-240 V AC, 50/60 Hz
  • link output for power daisy-chaining (IEC)
  • power cable included (Schuko - IEC)
  • power consumption: 25W
  • dimensions: 265 x 265 x 230mm
  • weight: 2.5 kg
Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar 1x Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar
Packed with thoughtful, practical details, the Innox IVA01 LS kit completes any simple yet solid lighting set up with a heavy-duty stand and a T-bar.

Product features

Stand weight capacity 15 kg
Sustainable product not specified
Maximum height of stand 330 to 340 cm
Set no
Light stand type stand with T-bar

Weight and dimensions including packaging

Weight (incl. packaging) 6,3 kg
Dimensions (incl. packaging) 127,0 x 18,0 x 15,5 cm

Product specifications

  • lighting stand with T-Bar
  • safety bolts included for extra security
  • very stable
  • weight: 4.70 kg
  • min. height: 1250mm
  • max. height: 3300mm
  • T-bar length: 1200mm
  • max. load capacity: 15kg
  • tube diameter: 35mm
  • materials: steel with plastic couplers and screw mounts
  • T-bar mounted via bolts
Devine DMX50/1.5 3-pin XLR DMX Cable, 1.5m 1x Devine DMX50/1.5 3-pin XLR DMX Cable, 1.5m
Devine DMX50 Series cables are built to complete solid DMX lighting set-ups. This strong yet flexible 1.5 metre long problem-solver comes finished with highly reliable 3-pin XLR plugs and has a 110 Ohm resistance.

Product features

Sustainable product not specified
Length 1.50 m
Data plug type XLR 3-pin

Weight and dimensions including packaging

Weight (incl. packaging) 136 gr
Dimensions (incl. packaging) 20,0 x 19,0 x 3,5 cm

Product specifications

  • Devine DMX cable
  • connectors: 3-pin male XLR - 3-pin female XLR
  • impedance: 110 Ohms
  • length: 1.5m
  • colour: black
  • compatible with: DMX lighting controllers
  • isolation diameter: 1.6mm
  • isolation colours: red and white
  • number of conductors: 2
  • shielding: 100%
  • shielding material: aluminium foil
  • shielding dimensions: BC 16 x 4 x 0.12mm
  • inner conductor section: 0.23mm²
  • inner conductor: BC 20 x 0.12mm
  • cable diameter: 6mm
  • sheathing material: flexible PVC
  • operating temperature:
    • for fixed installations: -40°C to +80°C
    • mobile installation: - 25°C / + 70°C
Ayra TDC Burst 6 LED Light Effect

Wrote the following about Ayra TDC Burst 6 LED Light Effect
Great! I love it!
Wonderful value… small size big light!
Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

Wrote the following about Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar
Additional to my previous review, the clamps that hold the tripod pole lift sections up, are very poor and don't clamp the pole itself at all allowing it to slip back down (this was not with a heavy load, but 4 simple compared LED lights), unless you depend on the through bolt to hold it, this means you have no option but to only allow it to go to heights determined by the hole spacings. I would not recommend this device at all
Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

Wrote the following about Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar
Bought two units, one arrived with the crossbar bracket broken. Despite emailing customer support almost every day to get it replaced, five days later I have still not received any reply. Not the first time ive had issues with customer support from Max. very very poor replies. if this unit has arrived damaged, I don't hold out much hope for the longevity of the other one, as it appears to be of inferior quality
Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

Wrote the following about Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar
Pretty robust for the money, though with a couple of oddities. The bolts used for hanging lights from the T-bar are a narrower gauge than those you find on most lighting hooks, etc, so may be incompatible with your other gear — in which case you'll have to use the bolts that come with the stand and nothing else. Also the bolt that you tighten to secure the T-bar on to the stand is surprisingly short — when you slacken it to lift the bar off the top of the stand there is a risk that the bolt will come all the way out of the nut that it screws into. If this happens the nut can fall out of the housing. More than once I've had to scrabble on the floor or scour the back of my car looking for it.
Ayra TDC Burst 6 LED Light Effect

Wrote the following about Ayra TDC Burst 6 LED Light Effect
Absolutely incredible lights from this up and coming company, great colours, width of projection and build quality for the price. Would definitely recommend.

Reviews from other countries

Translate all reviews into English

Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

Wrote the following about Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar
Stevig spul.
Er hangen nu 2 Ayra 60 led strobos en 2 Ayra derbys aan.
Meteen een draagtas bijbesteld.
Devine DMX50/1.5 3-pin XLR DMX Cable, 1.5m

Wrote the following about Devine DMX50/1.5 3-pin XLR DMX Cable, 1.5m
Prima kabel, doet exact wat het moet doen. Voelt degelijk en robuust aan.
Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

Wrote the following about Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar
De statieven zijn mooi stabiel en een fijne hoogte. Het plastic T stuk is niet heel sterk en kan na verloop van tijd breken! Kies voor een metalen T stuk daarmee voorkom je onnodige kosten voor reparatie of vervanging van je spots of andere fixtures. Naast extra kosten is veiligheid natuurlijk ook een belangrijke factor.
Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

Wrote the following about Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar
Ben zeer tevreden met dit statief van Innox.
Kan hem ver omhoog uitschuiven voor licht mooi van boven te laten werken.
Hij staat stevig.
Alleen jammer dat het niet meteen met draagtas compleet wordt verkocht voor een nette prijs.
Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

Wrote the following about Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar
Ben zeer tevreden met dit statief van Innox.
Kan hem ver omhoog uitschuiven voor licht mooi van boven te laten werken.
Hij staat stevig.
Alleen jammer dat het niet meteen met draagtas compleet wordt verkocht voor een nette prijs.

Other people also bought

  • Innox ALA HC50 Truss Half Coupler

    Innox ALA HC50 Truss Half Coupler

    £8.75
  • Devine DMX50/3 3-pin XLR DMX Cable, 3m

    Devine DMX50/3 3-pin XLR DMX Cable, 3m

    £8.75
  • Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

    Innox IVA01 LS Kit Heavy Lighting Stand + T-Bar

    £25
  • DAP FL0910 3-Pin XLR Male to Female DMX Cable, 10m

    DAP FL0910 3-Pin XLR Male to Female DMX Cable, 10m

    £12.30
  • DAP FL093 DMX XLR male - XLR female 3-pin 3 metres

    DAP FL093 DMX XLR male - XLR female 3-pin 3 metres

    £7.35
  • Ayra OSO 240B MKII DMX Lighting Controller

    Ayra OSO 240B MKII DMX Lighting Controller

    £70
  • DAP FL096 DMX XLR male - XLR female 3-pin 6m cable

    DAP FL096 DMX XLR male - XLR female 3-pin 6m cable

    £9.65
  • Ayra OSO 1612 DMX Scanmaster Controller

    Ayra OSO 1612 DMX Scanmaster Controller

    £64
  • Procab CLD953 XLR male – XLR female cable 5m

    Procab CLD953 XLR male – XLR female cable 5m

    £14.30
  • Innox SAF-BASIC-50S safety cable 3.2 mm 50 cm silver

    Innox SAF-BASIC-50S safety cable 3.2 mm 50 cm silver

    £5.25
  • Procab CAB465-G Power Schuko Extension Cable

    Procab CAB465-G Power Schuko Extension Cable

    £42

Other products from Ayra

Find all products of the brand Ayra

Related products from Ayra

Find all products from the brand Ayra in the category Lighting Starter Sets
Compare your gear (1/10)