Many wireless systems are powered by special batteries that are recharged by Chargers or Docking Stations. In some cases, you place the entire device (like a bodypack or hand-held mic) into the charger, and in others, you need to remove the battery in order to recharge it. Also check out our Batteries & Chargers category.
Power supply for two or three L 2015 chargers.
The Shure SB903 rechargeable lithium-ion battery is fully compatible with all Shure SLX-D Series transmitters.
The Shure SB904 lithium-ion battery pack delivers up to 12 hours of run-time on a full charge.
The upgraded version of the PS21E, the Shure PS24E power supply is compatible with the SLX4E, SLX4LE, PG-Series, PGX-Series T3, T4V, T4G, T4N, T88 and LX88 wireless receivers.
The Shure PS43E is here to replace the PS31E, PS40E and PS41E mains power adapters, and is compatible with receivers from the LX, UC, SC, ULX, SLX and PSM Series.
The Sennheiser EW-D Charging Set includes an L 70 USB charger, two BA 70 rechargeable batteries, and an NT 5-20 UCW power supply complete with travel adapters.
The Sennheiser BA 70 Rechargeable Battery Pack is compatible with the SK and SKM-S receiver from the Sennheiser Evolution Wireless Digital Series and can be recharged with a Sennheiser L 70 USB charger (not included).
This rechargeable battery pack is suited for the EW series by Sennheiser. The BA 2015 battery can be charged with the L 2015 by Sennheiser.
The beltpacks from Sennheiser's D1 series can be powered via AA batteries, but the beltpacks' performance is improved if you use this BA 30 battery. Can be charged quickly with the separately available CHG-2 charger.
The Shure SBC80-903-E battery charger has enough slots to recharge eight Shure SB903 rechargeable batteries at a time, making it an indispensable accessory for extensive Shure SLX-D-based setups.
This adapter is compatible with the EW 300 G2 and EW 100 G2/G3 in-ear monitor systems by Sennheiser and is a handy replacement if your current adapter is broken or worn out.
The Sennheiser NT1-1 is a power supply for a single L 2015 charger or ASA1 antenna splitter, for instance.
Upgrade your field kit with the Røde LB-1 rechargeable battery and set yourself up with up to 10 hours of additional battery life for your Performer TX-M2 and up to 100 hours of continuous power supply for VideoMic Pro+.
The Sennheiser BA 20 battery is suitable for the EKP AVX receiver.
The L 2015 charger automatically charges two Sennheiser BA 2015 rechargeable batteries. The batteries can directly be charged in the charger itself or in their transmitter/receiver.
Ideal for content creators who're always on the move, this charging case for Shure's MoveMic system keeps your wireless microphone safely tucked up and charged at the same time.
The Sennheiser L 70 USB charger is compatible with the BA 70 battery pack of Sennheiser's Evolution Wireless Digital Series SK and SKM-S bodypack and handheld transmitters.
This rechargeable battery for the JBL EON ONE MK2 portable line-array speaker system gives you six hours of performance.
The Shure SB900C is a rechargeable Li-ion battery that can be used with several Shure products.
With the efficient Shure SBC203-PS charging hub, two SLX-D batteries can be recharged at the same time, whether it's an SD903 battery or an SLXD Series handheld transmitter.
If the battery of your XVive U5 camera microphone is dead, you can go right back on thanks to the U5C battery charger. In fact, 3 batteries are included.
This single-slot charging station can be used to recharge a Shure SB904 rechargeable battery.
Shure PS51E 5.5V DC power adapter for Shure chargers. This power adapter is equipped with a European safety plug and a plug adapter for Shure charging modules.
The Sennheiser CHG 1-Kit-EU contains all the components you need to let your wireless transmitter or receiver from the Evolution Wireless series operate on a rechargeable BA2015 battery.
The Sennheiser NT 12-35 CS 12 Volt power supply has been specially designed to power the active Sennheiser EW-D ASA Antenna Splitter.
The Shure PS124 is an in-line power supply, equipped with non-lockable connectors for 4 wireless receivers (PG, PGX, PGXD, SLX) and/or PSM 200 transmitters.
With this charger you can fully load your MagCharger torches again. It's great to have as a spare part or if you're working at different sites.
The Sennheiser D1 system uses special battery packs, which can be recharged with this two-way CHG2 charger. It allows you to charge two batteries at the same time. Fit for the BA 10 and BA 30.
If you are sick of having to buy new AA batteries for your SKM D1 transmitters, you should get your hands on the BA 10. This battery can easily be charged and is designed specifically for the D1 series.
The Sennheiser EW-D Power Supply comes including adapter plugs so it can not only be used in the UK, but most of Europe, Korea, China and Australia.
The Sennheiser CHG 4N network charger allows you to fully charge the batteries of up to 4x SL DW handhelds and/or bodypacks within 2 hours. Each slot is equipped with LEDs that display the battery status of these devices.
Sennheiser BA 40 rechargeable battery pack for SpeechLine DW table stands and transmitters, especially the SL 133 and the 153-S DW-3 table stands. This battery pack is included here as standard. It is therefore a spare part.
The Sennheiser CHG 2 W is a wireless charger that uses the Q1 charging stand to charge the batteries of Sennheiser SL table stands and boundary microphones.
The Sennheiser NT 5-20 UCW power supply is compatible with the Sennheiser L 70 USB charger.
The Sennheiser CHG 70N-C is a charger with two bays for EW-DX transmitter batteries. You power the charger with a separately available adapter or via PoE. Control Cockpit software gives you control options and insight.
The Sennheiser CHG 70N-C is a charger with two bays for EW-DX transmitter batteries. You power the charger with the included adapter or via PoE. Control Cockpit software gives you control options and insight.
The Shure SBC200-E is a charging station (with power supply) for two SB900 battery packs, belt packs or transmitters. It is compatible with body packs and transmitters from the P9RA, P10R, ULXD1 and ULXD2 series (among others).
The Shure SBC800-E 8-Up charges up to eight Shure SB900 batteries simultaneously. These rechargeable batteries are used for the P10R and P9RA in-ear monitor systems.
The compact Shure SBC210-E charges two SB900 batteries simultaneously. These battery packs are used for the P9RA and P10R wireless systems by Shure, among others.
The Shure SBC200 Dual Docking is a recharging station for two SB900 batteries, body packs or transmitters. It is compatible with P9RA, P10R, ULXD1 and ULXD2 handheld/body pack transmitters. Used in combination with the SBC200-E.
The Sennheiser CHG 2N network charger features two individual charging stations to support two handheld microphones and/or bodypack transmitters including the Bodypack DW or SL Handheld DW. This model comes fitted with an RJ-45 port.
The Adapter Set NT 12-5 CW+ is a power supply for Sennheiser's EW-D EM receivers with a complete set of plug adapters for various countries.
Sennheiser's L 6000 is a practical charging station for bodypack transmitters or handheld transmitters from the Digital 6000 and Digital 9000 series. The 4 modules each feature two ports that accommodate battery packs.
The Sennheiser LM 6070 charging module is made for recharging two BA 70 batteries at once. It comes with four screws and is compatible with the L 6000 rack charger.
The Sennheiser Profile Wireless Charging Bar has two functions. First, you can use it to charge your separately available Profile Wireless system but you can also use it to turn one of your transmitters into a handheld microphone.
The Shure SBC10-903-PS charger accommodates a separately available SB903 battery for Shure's SLX-D series transmitters.
