Who doesn't want access to that fat Oxygene-style sound just because they can? The Erica Synths Black K-Phaser Eurorack module has it.
Since no Eurorack system is complete without a high-pass filter, Erica Synths serve up the 24dB-strong Black High-Pass Filter.
Spring reverb is an old classic - and an effect that a lot of guitarists still swear by - and here, it comes in the form of a Eurorack module courtesy of the fully tweakable Erica Synths Black Spring Reverb.
Why add one when you can expand your Eurorack set-up with four VCAs in one go? The Erica Synths Black Quad VCA2 module is home to four VCAs that each come with a dedicated volume control and a lin/log switch.
Erica Synths has two filters in their Black series: the Low-Pass Filter and the High-Pass Filter. If you like working with these, or expect to work with them, consider the Erica Synths Black VCF Coupler as well.
Designed for synth-nut novices as well as veterans, the Erica Synths Bullfrog is a Eurorack-based smasher of a synth unit that lays out some more-than interesting options.
The Erica Synths Black Stereo Reverb is a high-quality eurorack module. With three models (tape, BBD, digital) and three room-sizes per model. Of course, everything relevant is adjustable via patch cables.
The Erica Synths Black Stereo Delay2 is a nice eurorack module to go with it. It gives you a rich delay, with plenty to set, and with plenty of delay models to choose from.
When Erica Synths says XL, they mean XL, because the Bullfrog XL is big! Basically a brick wall of a synthesizer, this model might simplify your first steps into the synth-verse but also comes with some massive potential.
For the knights of the order of the soldering iron: the Erica Synths Elektor Formant System Full Kit. A beautiful wall with 27 modules. But you still have to solder it together.
A slim Eurorack life-saver, the Erica Synths Pico Multi2 module can split any signal and send it through multiple outputs, so it can do things like take an envelope and route it out to multiple VCFs.
Built to supply any Eurorack with some necessary overdrive, the Erica Synths Pico Drive module can be accurately tweaked via a satisfying set of control pots and CV inputs to lay on a sweet, raw effect.
The Erica Synths Pico SEQ2 is a basic but fun little sequencer in Eurorack-form. It sets you up with four rotary knobs for signal tweaking and can be dropped into two-step or four-step mode.
Inject some atmospheric vintage delay into your Eurorack loadout courtesy of the Erica Synths Pico BBD module.
The Erica Synths Hexinverter Mutant Hot Glue is a very handy eurorack module for when you want to mix some drum sources together. Includes distortion and compressor - with support for side-chaining!
The Erica Synths Black 3109 VCF/VCA is a lowpass filter with built-in VCA in eurorack format. It is designed around the AS3109 chip: a modern variant of the IR3109.
The Erica Synths Black Mixer/Splitter v2 is a handy Eurorack module that contains both a splitter and a simple mixer. The top half can be used to merge signals.
Got a few Eurorack stereo effects you'd like to cluster? Sounds like you could use the Erica Synths Black Stereo Mixer V3. This Eurorack module sets you up with four stereo inputs with dedicated level controls.
At some point, there's going to be no way around getting one: a Eurorack module like the Erica Synths Black XFade that enables you to crossfade two CV or audio sources and even via a CV signal.
The Studio Electronics Boomstar Modular Filter 8106 is a very good Eurorack module for your Eurorack wall. It combines an HPF and an LPF. So you can make nice deep sweeps, while at the bottom it doesn't get too clunky.
The Studio Electronics Boomstar Modular Levels is a Eurorack module mixer/attenuator suitable for both audio and CV.
The Tonestar 2600 is basically a pre-patched ARP 2600 and, since it's a Studio Electronics product, it offers professional, classic analogue sound. While it's a bit of an investment, boy does it pay off.
Complex routings are one thing, a solid foundation sound is another. Luckily, the Studio Electronics Tonestar 8106 is the perfect Eurorack module for setting up great sound in a heartbeat.
With the Studio Electronics Boomstar Modular Mix4, you get a compact Eurorack module with just one simple function: audio or CV mixing.
With the Studio Electronics Boomstar Modular Router Eurorack module, you get two bidirectional audio or CV routers. This allows you to switch an incoming signal between two destinations.
With the Studio Electronics Boomstar Modular Multiple, you get a passive dual-signal splitter for your Eurorack wall.
With this Studio Electronics Boomstar Modular Attenulag, you get a Eurorack module with attenuators. With this module, it is possible to influence the intensity or loudness of a signal
This sequencer gives you a huge amount of choice and creative freedom to experiment with sounds. The interface may be a little overwhelming at first, but after a while it becomes very intuitive.
This Studio Electronics Boomstar Modular Amp is a two-stage Class A amplifier in Eurorack module form.
Looking for another nice analogue low-pass filter for your Eurorack collection? Then this Studio Electronics Boomstar Modular Filter 3003 might be what you are looking for.
