▾

Samson RSX115 Passive Speaker Bundle

Discontinued, this product can no longer be ordered.

No alternatives found

Product information
360° Photo
Reviews (254)
Downloads (3)

Samson RSX115 Passive Speaker Bundle
Product no: 9000-0138-9803 Bax Music Warranty: Samson RSX115 Passive Speaker This product comes with a 3-year warranty. Devine MX-1200 2-Channel PA Power Amplifier, 2x 600W at 8 Ohms This product comes with a 3-year warranty. Devine SPE15/5 5-Metre Speaker Cable, 2x1.5mm This product comes with a manufacturing defects warranty. Innox IVA03 Speaker Stands with Bag (Set of 2) This product comes with a 3-year warranty.

Specifications

2x Samson RSX115 Passive Speaker
The RSX115 is a powerful, passive, full-range speaker with 15-inch woofer and 1.75-inch Celestion compression driver.

Product features

Mid driver/woofer diameter	15 inches
Tweeter diameter	1.75 inches
Sensitivity	98 dB
Weight per speaker	25 kg
Installation speaker / 100 V	no
Maximum SPL	120 dB - 129 dB
Maximum frequency	20 - 20.9 kHz
Minimum frequency	50 - 59 Hz
Nominal impedance	8 ohms
Peak power in watts	1,500 - 3,000 watts
RMS capacity in watts	500 - 749 W
Set	no

Weight and dimensions including packaging

Weight (incl. packaging)	30,0 kg
Dimensions (incl. packaging)	81,0 x 57,0 x 41,0 cm

Product specifications

passive speaker
two-way system
woofer: 15 inches with 3-inch voice coil
compression driver: Celestion CDX1-1745 1.75 inch PETP
dispersion angle horn: 90 x 60 degrees
capacity AES: 600 W
peak power capacity: 2,400 W
impedance: 8 Ohms
frequency response: 50 Hz - 20 kHz
stand adapter: 1⅜ inches
twelve M10 rigging/fly points
integrated handle
housing: trapezoid, 9-layer plywood
finish: durable black lacquer

Connectors:

2x locking speaker connector
2x 6.3mm jack

1x Devine MX-1200 2-Channel PA Power Amplifier, 2x 600W at 8 Ohms
Designed to provide passive speakers with ample headroom, the hefty Devine MX-1200 PA two-channel power amplifier supplies 600 Watts per channel at 8 Ohms or 900 Watts per channel at 4 Ohms.

Product features

19-inch rack size	2U
2-ohm compatible	no
Number of amplifier channels	2
Audio loop output	no
Bridge mode	yes
Sustainable product	not specified
Input	RCA, RCA + XLR, XLR
Built-in filter	none
Built-in protection	overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in DSP processor	no
Cooling	ventilator
RMS power (4 ohms) per channel	900 - 999 watts
RMS power (at 8 Ohms) per channel	600 - 699 Watts
Amplifier class	H
Amplifier output	locking speaker connector, wire clamps
Equipped with crossover	no

Weight and dimensions including packaging

Weight (incl. packaging)	15,0 kg
Dimensions (incl. packaging)	54,0 x 42,0 x 14,0 cm

Product specifications

power (RMS):
- 2x 600W at 8 Ohms
- 2x 900W at 4 Ohms
- bridged at 8 Ohm: 1x 1200W
Class-H
frequency response: 20Hz - 20kHz
input sensitivity: 1.4V / 0.775V
input impedance: 20 kOhm / 10 kOhm
damping factor: >200
S/N ratio: >100 dB
power supply: 220 - 240V AC, 50/60 Hz
connections:
- inputs: XLR (balanced), RCA (unbalanced)
- speaker outputs: 2x speakON + wire terminals
- bridged outputs: 1x wire terminal
Ground Lift function
dimensions (W x D x H): 48.2 x 37 x 8.8cm (2 U/HE)
weight: 14.5 kg

2x Devine SPE15/5 5-Metre Speaker Cable, 2x1.5mm
Chances are, you'll need a speaker cable sooner or later, so you might as well keep one or more handy in your cable case! Attractively-priced, the Devine SPE15/1.5 offers dependable, interference-free signal transfer.

Product features

Sustainable product	not specified
Length	5.00 m
Male/female	female - female
Audio connector	lockable speaker connector 4p
Number of cores	2
Conductor diameter	1.5 mm2

Weight and dimensions including packaging

Weight (incl. packaging)	500 gr
Dimensions (incl. packaging)	24,0 x 20,0 x 4,5 cm

Product specifications

speaker cable
connector 1: locking speaker connector (4SPP)
connector 2: locking speaker connector (4SPP)
high signal quality
cable type: 2x 1.5 mm²
suitable for a power capacity of up to 500 watts (PA)
length: 5m
colour: black

1x Innox IVA03 Speaker Stands with Bag (Set of 2)
This solid set of two speaker stands come complete with a bag, and since the stands have been TUV approved, they can take a maximum load of 25kg each.

Product features

Sustainable product	not specified
Set	yes
Mininum stand height	110 to 120 cm
Maximum height of stand	180 to 190 cm
Stand weight capacity	25 kg
Colour	black
Wind-up mechanism	no
Number of stands	2
Type of base	tripod
Shock absorption system	no
Stand material	metal
Included stand accessories	bag
Weight per stand	2 to 4 kg
Stand mount	35mm flange

Weight and dimensions including packaging

Weight (incl. packaging)	7,5 kg
Dimensions (incl. packaging)	100,5 x 21,5 x 12,5 cm

Product specifications

set consists of 2 stands and 1 practical carry bag
maximum load: 25kg each
tube diameter: 35mm
height: 1.2 - 1.8m
dimensions (folded): 97cm
weight: 4.4kg
material: metal
finish: satin black powder coating

A review can no longer be written about this item

Kevin Bull January 21, 2025