Based on more than 21,240 customer reviews

Dynacord PM 502 powered mixer

Discontinued, this product can no longer be ordered.

Alternative items

Peavey XR-S powered mixer

In stock
Recommended price £919 £715
Dynacord PM 502 powered mixer
Product no: 9000-0013-5140 Bax Music Warranty: This product comes with a 3-year warranty.

General

The PM 502 by Dynacord is a powered mixer that is equipped with five analogue microphone/line inputs and three stereo inputs. Its compact design and thought-through flexible output routing make it the perfect mixer for fixed installations, such as those in pubs, restaurants, houses of worship, convention centres and so on. However, the PM 502 is also able to hold its own when used by DJs, bands and other entertainers. It is equipped with a power amp of 2x 450 watts and features advanced microphone processing like compressor/limiter and effects, making it a very versatile mixer. The built-in MP3 player can be fed with music by connecting a memory drive to the USB port on the front, making it dead easy to play (background) music.

The mixer section: extensive possibilities

Both the five combined mic/line inputs and the three stereo inputs feature a three-band tone control, an FX send, an aux send, a peak LED and volume control. On the rear there's a switch to engage phantom power for the five microphone inputs so you will have no problem using condenser microphones. A compressor/limiter can be applied to each of the microphone inputs to restrain the differences in dynamics of several microphones. The PM 502 has no fewer than three master outputs. Each master output has its own 7-band graphic equalizer, allowing you to adjust the timbre of each output to the acoustics of the room. With three master outputs, you can supply three different rooms with (different) music.

Digital power and analogue quality

The Dynacord PM 502 is equipped with a digital amplifier that produces two times 450 watts at 4 ohms, which is more than enough to power a small sound set or several speakers in a restaurant with crystal-clear sound. As usual, the German Dynacord have fitted this device with several protective features to safeguard the amp and your speakers. You can control no fewer than 32 effect presets and additional settings via the built-in display. Additionally, this speaker can also be used for a 100-volt installation without an external transformer thanks to its Direct Drive speaker connection, which is a particularly practical feature for shops and shopping centres.

Tips or comments about this product

-

Specifications

Product features

19 inches 19-inch rack mount (not included)
Number of auxiliaries 1 - 2
Number of microphone inputs 5 - 8
Number of mono channels 5
Number of stereo channels 3
Number of submasters none
Compressor on the inputs only on mono inputs
Sustainable product not specified
Equalizer 3-band, 7-band parametric
Built-in protection overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in effects yes
Panning per channel no
Connector position back
RMS power (4 ohms) 2x 450 W
RMS power (8 ohms) 2x 275 W
Type of mixer inputs microphone input (XLR), balanced line input (TRS jack), unbalanced line input (RCA)
Type of mixer outputs balanced line output (TRS jack), stereo headphone output (TRS jack or mini jack), lockable speaker output, wire terminal
Mixer power power cable
Volume control knobs

Weight and dimensions including packaging

Weight (incl. packaging) 6,3 kg
Dimensions (incl. packaging) 47,0 x 33,0 x 30,0 cm

Product specifications

  • compact powered mixer
  • built-in
  • inputs: 5x XLR microphone/line, 3x stereo 6.35mm jack and RCA
  • each input features 3-band tone control, FX send, AUX send, volume, peak LED
  • amplifier: class D
  • power: 2x 450 watts at 4 ohms
  • effects: 32 presets (can be edited), stereo 24/48 bit
  • connector for foot pedal
  • outputs: Master A, Master B, AUX
  • Master B features delay, adjustable between 0-145 ms for long lines
  • each master output is equipped with 7-band graphic equalizer
  • headphones connector: 3.5mm on the front
  • USB port: on the rear to connect to a computer, on the front for USB drives
  • Direct Drive option to power 100V speaker lines
  • cooling: fan
  • display: 128 x 64 pixels LCD
  • phantom power: 48V switchable
  • total harmonic distortion 1 kHz, MBW=22 kHz:
    • microphone inputs to Master A

There are no reviews for this product yet.
Description Type Language Extension
Datasheet Manual Unknown

Other products from Dynacord

Find all products of the brand Dynacord

Alternative products by other brands

Search all products in category Powered Mixing Desk

Peavey XR-S powered mixer

In stock
Recommended price £919 £715
Compare your gear (1/10)